Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hole Saw Under $75 (2026): 3 Picks Compared

Three hole saws and kits for shop, farm and home jobs, compared on sizes, materials, cutting depth and what ships in the box.

Best Hole Saw Under $75 (2026): 3 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EZARC 16-Piece Bi-Metal Hole Saw KitBest OverallEZARC 16-Piece Bi-Metal Hole Saw Kit9.7/10View on Amazon
  2. 2VIKITON 6-1/4 Inch Hole SawBest Large Single SawVIKITON 6-1/4 Inch Hole Saw9.6/10View on Amazon
  3. 3LENOX 2-Inch Hole Saw with ArborBest 2-Inch Metal SawLENOX 2-Inch Hole Saw with Arbor9.5/10View on Amazon

A door latch hole, a pipe pass-through or a recessed light cut all start with the right saw, and the best hole saw under 75 in this list covers kits and single saws for shop, farm and home jobs. The listings were compared on size range, material, cutting depth and kit contents, and ranked by fit for work under that ceiling.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall EZARC 16-Piece Bi-Metal Hole Saw Kit: 10 saws from 3/4 to 2-1/2 inches, cobalt bi-metal Check price on Amazon
  • Best Large Single Saw VIKITON 6-1/4 Inch Hole Saw: 6-1/4 inch bi-metal saw with arbor and spare bit Check price on Amazon
  • Best 2-Inch Metal Saw LENOX 2-Inch Hole Saw with Arbor: 2-inch bi-metal saw with Speed Slot plug ejection Check price on Amazon

The machines

EZARC 16PCS Bi-Metal Hole Saw Kit, 3/4"-2-1/2"

EZARC 16PCS Bi-Metal Hole Saw Kit, 3/4"-2-1/2"

EZARC9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece kit with 10 M42 bi-metal saws from 3/4 to 2-1/2 inches, two arbors and a case, for thin metal, plywood, PVC and drywall.

Pros

  • 10 saws from 3/4 to 2-1/2 inches in one kit
  • M42 bi-metal with 8% cobalt and 4/6 TPI variable pitch
  • Eject slots for chip clearance and less heat buildup
  • Heavy-duty case with latch, custom slots and a clear lid label

Cons

  • Largest saw is 2-1/2 inches, so wider holes need another saw
  • Maker claims of faster cutting and longer life are not listing specifications
  • For thin metal only among metals, not thick stock
  • No warranty term is stated
6-1/4 inch Hole Saw for Wood, Metal

6-1/4 inch Hole Saw for Wood, Metal

VIKITON9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 6-1/4 inch bi-metal saw with arbor, pilot bit and spare bit, for wood, plastic, drywall and thin metals.

Pros

  • Large 6-1/4 inch cut in one saw
  • High-speed steel teeth on a flexible steel body
  • Arbor, pilot bit, replacement bit and hex key included
  • Aimed at fast chip removal and smooth, clean cuts

Cons

  • Not for stainless steel
  • Not for brittle materials such as glass, ceramic or tile
  • One size only, so other hole sizes need another saw
  • No warranty term is stated
LENOX Tools Hole Saw with Arbor, Speed Slot

LENOX Tools Hole Saw with Arbor, Speed Slot

Lenox9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A single 2-inch bi-metal saw with arbor and Speed Slot ejection, for metal cutting.

Pros

  • 2-inch bi-metal saw with arbor included
  • Speed Slot staircase design for easy plug ejection
  • Larger, sharper teeth for faster cutting in metal
  • Increased wall thickness for durability and less tooth loss

Cons

  • One size only at 2 inches
  • No warranty term is stated
  • Cutting depth: Not stated

Other welders and gear to compare

Spec sheet comparison

Hole Saw Gear Score Sizes Material Cutting depth
EZARC 16-Piece Bi-Metal Hole Saw Kit 9.7/10 3/4 to 2-1/2 in, 10 saws M42 bi-metal, 8% cobalt 1.89 in (48 mm)
VIKITON 6-1/4 Inch Hole Saw 9.6/10 6-1/4 in, 1 saw Bi-metal, high-speed steel teeth Not stated
LENOX 2-Inch Hole Saw with Arbor 9.5/10 2 in, 1 saw Bi-metal Not stated

Specifications are as published on each listing and collected 28 October 2026. Where the spec table disagrees with the title, the review notes it.

Buying guide: how to choose the best hole saw under 75

Size range versus a single saw

A kit covers many hole sizes in one box: the EZARC kit spans 3/4 to 2-1/2 inches. The EZARC kit covers desk surfaces, door hardware, furniture, lighting fixtures and pipe installations. A single saw suits one repeated hole size, such as the VIKITON 6-1/4 inch saw or the LENOX 2-inch saw. Count the hole sizes on your job list before choosing between a kit and a single saw.

Material decides the saw

Bi-metal saws cut wood, plastic, drywall and thin metal: the VIKITON saw is listed for wood, plastic, drywall and thin metals, excluding stainless steel, and the EZARC kit cuts thin metals, softwood, plywood, plastic sheets, drywall and PVC boards. The LENOX saw is listed for metal. Match the saw material to the workpiece material. See cobalt vs bi-metal hole saw for the material trade-off.

Arbors, depth and ejection

Check what ships with the saw: the EZARC kit ships with two arbors and the VIKITON saw ships with one arbor. Cutting depth matters for thick stock: the EZARC depth is 1.89 inches. Eject slots and the LENOX Speed Slot design help clear plugs and chips.

Heat and chips on metal

Heat and chips decide how long a saw lasts on metal. The VIKITON tips call for water or coolant and a slower feed on metals, cooling before touching, and stopping at once if vibration turns abnormal. The EZARC kit uses eject slots for chip clearance and less heat buildup, and the LENOX Speed Slot design ejects plugs. Clear chips often and keep the feed slow on metal. The VIKITON saw is built for fast chip removal with high-speed steel teeth on a flexible steel body.

Tooth design also matters on metal. The LENOX listing claims 2X more durability with 50% longer life than previous LENOX hole saws, with larger, sharper teeth for faster cutting in metal. The EZARC 4/6 TPI variable tooth pitch is listed for faster, cleaner cuts.

Before You Strike an Arc

  • Check the arbor fit before cutting: the VIKITON saw ships with an arbor and the EZARC kit ships with two arbors.
  • Let the saw cool before touching it, as the VIKITON listing advises.
  • Use water or coolant and a slower feed on metals, as the VIKITON listing advises.
  • Match the saw to the material: the VIKITON saw is not for stainless steel or brittle materials.
  • Confirm the size before ordering: the EZARC kit covers a range of sizes, while the VIKITON and LENOX picks are single sizes.

FAQ for welders

What size hole saw do I need for a doorknob?

Match the saw to the hole the hardware needs. The EZARC kit covers sizes from 3/4 to 2-1/2 inches. Measure the hardware first, then pick a set that includes that size.

Can one hole saw cut wood, plastic and metal?

Some can, within limits. The VIKITON saw is listed for wood, plastic, drywall and thin metals, excluding stainless steel. The EZARC kit is listed for thin metals, softwood, plywood, plastic sheets, drywall and PVC boards.

Do I need a different saw for porcelain tile?

Yes. Porcelain tile, ceramic and marble need a diamond bit, not a bi-metal saw. None of the three picks here is a diamond bit, and the VIKITON listing warns against brittle materials such as tile for its bi-metal saw.

What comes with a hole saw kit?

The EZARC kit ships with arbors, pilot drills, an adapter nut, a washer and a hex key. The VIKITON saw ships with an arbor, a pilot drill bit, a replacement bit and a hex key.

Related: best hole saw under 50, cobalt vs bi-metal hole saw, best hole saw for sheet metal and annular cutter vs hole saw. Also see the metal fab tools hub.

Scoring, line by line

Each saw is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. None of the three listings states a safety standard or a warranty term, so safety and warranty score nothing here.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
EZARC 16-Piece Bi-Metal Hole Saw Kit 9.7 32 21 21 n/a 0
VIKITON 6-1/4 Inch Hole Saw 9.6 29 21 19 n/a 0
LENOX 2-Inch Hole Saw with Arbor 9.5 29 21 18 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More buying guides

Metal Fab Tools ·

Best Hole Saw Under $30 (2026)

Three hole saws compared by size range, stated materials and kit contents, from a 4-inch bi-metal saw with arbor to a 25-piece carbon steel…