Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Porter-Cable PC750AG Review: Pros, Cons & Who It’s For

A Porter-Cable PC750AG review from the listing: a 4-1/2-inch, 7.5-amp corded angle grinder 2-pack with cast metal gear housings, limits and who it fits.

Porter-Cable PC750AG Review: Pros, Cons & Who It’s For
On this page

Prepping steel joints, stripping mill scale before laying a bead, or cutting square tubing down to length puts an angle grinder on the bench daily. This Porter-Cable PC750AG review examines how this 4-1/2-inch corded tool fits metal fabrication, shop prep, and weld cleanup. Porter-Cable lists a 7.5-amp motor, cast metal gear housing, and a 3-position side handle in a pack of 2. We have not used this angle grinder ourselves; this review is based on Porter-Cable’s Amazon listing for the PC750AG and the specs published there.

As an Amazon Associate I earn from qualifying purchases. WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The angle grinder

Porter-Cable PC750AG 4-1/2-Inch 7.5-Amp Angle

Porter-Cable PC750AG 4-1/2-Inch 7.5-Amp Angle

PORTER-CABLE9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A corded electric 4-1/2-inch angle grinder with a 7.5-amp motor, cast metal gear housing, 3-position side handle and spindle lock, sold in a pack of 2.

Pros

  • Durable 7.5-amp motor for shop metal fabrication and weld prep
  • Cast metal gear housing increases jobsite durability and tool longevity
  • 3-position adjustable side handle with soft grip improves comfort and control
  • 3-year limited warranty with 1-year free service coverage

Cons

  • Standalone bare-tool weight is not stated on the listing
  • Operating no-load speed in RPM is not stated on the listing
  • Spindle thread size is not stated on the listing
  • No CSA, UL or ETL safety certification stated

Porter-Cable PC750AG review: the short verdict

The Porter-Cable PC750AG is a corded electric 4-1/2-inch angle grinder designed for fabrication tasks like cleaning weld seams, removing mill scale, and cutting steel. The listing presents this model as a pack of 2 under model number PC750AG, giving a fab shop or garage two identical motor units to share bench duties.

Several stated features make a solid case for everyday shop work. The 7.5-amp motor provides corded electric power without relying on batteries or chargers. A cast metal gear housing gives the head durability against drops and shop grit. A 3-position adjustable side handle lets you position your support hand on either side or the top of the housing for better grip. A spindle lock allows for single-wrench wheel changes. Porter-Cable backs the tool with a 3-year limited warranty, 1 year of free service, and a 90-day money-back policy.

The clear drawback is the listing’s lack of key specifications. Operating speed in RPM is not stated, spindle thread size is omitted, and the spec table lists an item weight of 11.8 pounds for the 2-pack without stating the bare weight of a single tool. In addition, no CSA, UL, or ETL safety mark is published on the listing. Buyers needing those details before ordering will need to contact the manufacturer directly.

Key specs

Product Motor Wheel Size Power Source
Porter-Cable PC750AG 7.5A 4-1/2 in Corded electric

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 14 October 2026. Wheel size indicates the maximum disc diameter specified by the maker for this model.

What the PC750AG does well

A 7.5-amp corded motor for joint preparation and weld cleaning

An angle grinder lives or dies by its motor capacity under load. The PC750AG listing specifies a 7.5-amp motor powered by corded electric current. In a metal shop, a 7.5-amp motor handles abrasive wheels and flap discs for light to moderate tasks like smoothing weld spatter, deburring edges, and preparing joints. Because it operates on corded electric power, it runs continuously from an outlet without battery run-time constraints. If you regularly prep steel joints before laying a bead, our guide on how to remove mill scale before welding explains why thorough surface grinding matters for weld quality.

Three-position adjustable side handle and soft grip control

Control determines both grind quality and operator safety when running abrasive discs at high speed. The listing highlights a 3-position adjustable side handle that mounts on either side or the top of the gear case. Having three mounting locations allows you to adjust your grip angle when grinding flat on the bench, working along vertical edges, or fitting into tight corners. The listing also notes a soft grip handle that cushions vibration during extended grinding sessions. For joint preparation technique, see our overview on how to bevel metal for welding.

Cast metal gear housing and spindle lock

Grinding produces heat and abrasive particles that punish tool bodies. The listing specifies a cast metal gear housing designed to increase jobsite durability and tool longevity around shop hazards. In addition, the listing specifies a spindle lock button that stops the arbor from spinning, enabling single-wrench accessory swaps when moving between grinding wheels, wire wheels, and cut-off discs. Our comparison of flap disc vs grinding wheel breaks down which abrasive suits each stage of weld prep.

Two grinders in one package with warranty support

The listing packages two complete PC750AG grinders in one carton with a listed unit count of 2. In an active fab shop, running two grinders side by side is a practical workflow setup. You can mount a cut-off wheel on one machine to slice angle iron and a flap disc on the second unit to deburr edges and smooth welds, eliminating frequent wheel swaps. Porter-Cable also includes a manufacturer warranty description detailing a 3-year limited warranty, 1 year of free service, and a 90-day money-back policy, providing documented warranty coverage directly from the manufacturer.

Limitations

  • Weight listed only per pack: The spec table lists an item weight of 11.8 pounds for the pack of 2, but does not state the individual weight of a single bare grinder, making it difficult to gauge tool fatigue on paper.
  • No RPM or no-load speed stated: The listing omits the tool’s rotational speed rating in RPM. Fabricators must ensure that any mounted wheels are rated safely for the grinder’s operating speed.
  • Spindle thread size omitted: While the listing confirms a spindle lock for single-wrench changes, it does not state the spindle thread dimensions or arbor threading.
  • No safety certification stated: No CSA, UL, or ETL safety marks appear on the listing. Shops that require certified electrical listings for shop equipment must verify compliance with the seller.
  • Accessory contents unstated: The listing does not specify what comes in the box beyond the grinders, leaving questions about included wheel guards, spanner wrenches, or sample discs.

How we scored it

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Porter-Cable PC750AG 9.5 29 19 21 0 4

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.

The Gear Score weighs performance, build, value, safety and warranty, as explained on our how we pick page. The PC750AG scores solidly on performance for its 7.5-amp corded motor and on value for delivering two complete angle grinders in a single package. Warranty earns high marks for its stated 3-year limited term and 1-year free service coverage. Build score reflects the durable cast metal gear housing but is moderated because individual tool weight and arbor specs are omitted. Safety scores zero because no recognized electrical certification is stated on the listing.

Who should buy the Porter-Cable PC750AG, and who should skip it

Buy it if

  • You want two matching corded angle grinders to keep different abrasives mounted simultaneously on your bench.
  • You need a dependable 7.5-amp corded tool for weld cleanup, mill scale removal, and metal prep.
  • You value a 3-position side handle for flexible grip angles during flat, vertical, or corner grinding.
  • You want manufacturer warranty backing featuring a 3-year limited warranty and 1-year free service.

Skip it if

  • You require documented CSA, UL, or ETL safety certification markings on paper for commercial shop compliance.
  • You need known bare-tool weight or verified RPM specifications published before buying.
  • You prefer a cordless grinder for remote field work away from electrical outlets; check our best cordless angle grinder guide instead.

Alternatives

Before You Strike an Arc

  • Confirm your corded electric power supply and extension cord are rated adequately for running a 7.5-amp tool continuously during shop fabrication.
  • Inspect both grinders in the 2-pack upon arrival to verify the cast metal gear housings, power cords, and 3-position handles are intact.
  • Depress the spindle lock button to verify positive arbor locking before securing any 4-1/2-inch grinding wheel or retaining flange with a single wrench.
  • Put on proper protective gear, including safety glasses with side shields, a full face shield, and leather gloves, before grinding near your welding bench.

FAQ for welders

What size grinding wheel does the Porter-Cable PC750AG use?

The listing rates the Porter-Cable PC750AG for 4-1/2-inch wheels and discs. That diameter fits standard 4-1/2-inch grinding wheels, cut-off discs, and flap discs used for weld preparation and metal cleanup. Check that any accessory you mount matches the tool’s 4-1/2-inch rating.

How many grinders come in the Porter-Cable PC750AG package?

The listing states that this package is a pack of 2, with a listed unit count of 2 items. Having two grinders in the shop lets you keep a cut-off wheel mounted on one tool and a grinding wheel or flap disc on the other. That saves time swapping accessories during fabrication work on the bench.

Does the Porter-Cable PC750AG have a spindle lock?

Yes. The listing specifies a spindle lock feature designed for single-wrench accessory changes. Engaging the spindle lock keeps the arbor stationary so you can tighten or loosen the retaining flange with a single wrench when swapping wheels.

What warranty comes with the Porter-Cable PC750AG?

Porter-Cable lists a 3-year limited warranty, 1 year of free service, and a 90-day money-back policy for the PC750AG. Buyers who need replacement parts or warranty service should keep their purchase receipt and contact Porter-Cable customer service directly.

Related: best angle grinder for welding prep, flap disc vs grinding wheel, best flap disc for weld grinding, and the metal fab tools hub.

More buying guides