Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Glass Bead Blasting Media Size Chart and Guide

Glass bead blasting media size chart with mesh ranges for four glass bead picks, from medium cleaning beads to fine finishing beads, plus weights and container sizes.

Glass Bead Blasting Media Size Chart and Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1#8 Glass Beads - (10 LBS or 4.54 kg)#8 Glass Beads - (10 LBS or 4.54 kg)9.6/10View on Amazon
  2. 2#10 Glass Beads - 10 lb (4.5 kg)#10 Glass Beads - 10 lb (4.5 kg)9.5/10View on Amazon
  3. 3Blast Media, Glass Beads, FineBlast Media, Glass Beads, Fine9.4/10View on Amazon
  4. 4#7 Glass Beads - 10 lb (4.5 kg)#7 Glass Beads - 10 lb (4.5 kg)9.4/10View on Amazon

A part comes off the blaster either clean and even or patchy and rough, and the bead size often decides the result. A glass bead blasting media size chart answers that choice directly: it matches mesh ranges to the work, from stripping and cleaning down to a fine, even finish. This guide puts the glass bead picks on a chart, with the mesh range, grit and container size for each, so the size can be picked before the hopper is filled.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

#8 Glass Beads - (10 LBS or 4.54 kg)

#8 Glass Beads - (10 LBS or 4.54 kg)

Industrial Mineral Supply9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A medium 70-100 US mesh glass bead in a 10 lb (4.54 kg) container, listed for cleaning, finishing and peening, with no free silica in the media.

Pros

  • States a 70-100 US mesh range, the clearest size in this guide
  • Maker lists cleaning, finishing and peening uses
  • Contains no free silica
  • Maker states the beads recycle many times

Cons

  • Only a 10 lb container, so larger jobs need more bags
  • Medium grade only, so fine finishing needs a different bead
  • No warranty term is stated
  • A 10 lb container suits small jobs, not bigger work
#10 Glass Beads - 10 lb (4.5 kg)

#10 Glass Beads - 10 lb (4.5 kg)

HDURCIR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A medium 100-170 mesh glass bead in a 10 lb (4.5 kg) container, at the fine end of this chart, for the finishing step.

Pros

  • 100-170 mesh, at the fine end of this chart
  • Medium grade for the finishing step
  • 10 lb container is easy to store beside the cabinet
  • Part number names the size and weight, so reordering the same bead is simple

Cons

  • Only a 10 lb container, so steady cabinet work needs more than one bag
  • Medium grade only, so coarse cleaning needs a different bead
  • Fine beads suit light finishing, not heavy scale
  • A 10 lb bag leaves little spare media
Blast Media, Glass Beads, Fine

Blast Media, Glass Beads, Fine

BALLOTINI9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A fine glass bead in a bulk 53 lb container, listed at 90 to 150 micron, for a shop that blasts often and wants one large bag.

Pros

  • Bulk 53 lb container suits a shop that blasts often
  • States a 90 to 150 micron range for the fine grade
  • Largest container in this guide, so fewer refills
  • Fine grade suits light finishing work

Cons

  • A 53 lb container is heavy to lift and move
  • Fine grade only, so cleaning needs a coarser bead
  • No warranty term is stated
  • A 53 lb container needs shelf space
#7 Glass Beads - 10 lb (4.5 kg)

#7 Glass Beads - 10 lb (4.5 kg)

HDURCIR9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A medium 60-80 mesh glass bead at 120 grit in a 10 lb (4.5 kg) container, the coarsest bead in this guide, for the cleaning step.

Pros

  • Coarsest bead in this guide at 60-80 mesh
  • States a 120 grit size alongside the mesh range
  • Medium grade suits the cleaning step before finishing
  • 10 lb container matches the other small picks

Cons

  • Only a 10 lb container, so steady work needs more than one bag
  • Medium grade only, so fine finishing needs a different bead
  • Coarse beads can leave a rougher surface than fine beads
  • Small container suits small jobs, not steady shop work

Glass bead blasting media size chart

Mesh numbers run the other way round from what a first glance suggests: a higher mesh number means a finer bead, since more of them fit across the same span. The chart below lists the picks in this guide by the size the maker states, with the grit where the maker states one.

  • HDURCIR #7. 60-80 mesh, 120 grit, in a 10 lb (4.5 kg) container.
  • Industrial Mineral Supply #8. 70-100 US mesh, in a 10 lb (4.54 kg) container.
  • HDURCIR #10. 100-170 mesh, in a 10 lb (4.5 kg) container.
  • BALLOTINI Fine (on Amazon). 90 to 150 micron, in a 53 lb container.

The ranges overlap, and that overlap is normal: a 70-100 mesh bead and a 60-80 mesh bead share part of the same band, so the choice comes down to the finish the job needs rather than a single number. Medium beads suit cleaning and prep, while fine beads suit blending and a smoother finish.

Side by side

Product Media size Container size Item weight
Industrial Mineral Supply #8 70-100 US mesh 10 lb (4.54 kg) 10.0 pounds
HDURCIR #10 Glass Beads 100-170 mesh 10 lb (4.5 kg) 10.0 pounds
BALLOTINI Fine Glass Beads 90 to 150 micron 53 lb 53.0 pounds
HDURCIR #7 Glass Beads 60-80 mesh, 120 grit 10 lb (4.5 kg) 10 lb (4.5 kg)

The four picks split into two groups: three 10 lb containers for small and medium jobs, and one 53 lb container for a shop that blasts often. Mesh is the main difference between the three smaller picks, with the #7 at 60-80 mesh, the #8 at 70-100 US mesh and the #10 at 100-170 mesh.

How to pick a size for the job

Start from the finish, not the bag. Cleaning and prep work that leaves the surface ready for the next step suits a medium bead, and the #8 lists cleaning, finishing and peening among its uses. Blending machine marks and sealing pores is the finishing use the #8 maker lists for its medium bead, and the #10 sits at the fine end of this chart at 100-170 mesh.

A nozzle angle also matters: the #8 maker states cleaning works at a 45 to 60 degree nozzle angle. The #8 maker states the beads can be recycled many times, which stretches a 10 lb container across more than one job.

The glass bead picks

Each pick below matches one row of the chart above, with the size, weight and container the maker states.

FAQ for welders

What glass bead size suits cleaning metal parts?

A medium bead suits cleaning and prep. The #8 in this guide is a medium bead at 70-100 US mesh, and its maker lists cleaning first among its uses, ahead of finishing and peening. It also states the media contains no free silica and can be recycled many times.

What mesh is #10 glass bead?

The #10 glass bead in this guide is 100-170 mesh, and it comes in a 10 lb (4.5 kg) container. That puts it at the fine end of the chart, past the #8 at 70-100 US mesh and the #7 at 60-80 mesh.

Can glass bead blasting media be reused?

The #8 maker states the beads can be recycled many times, so a single container can serve more than one blasting session. Used beads still need a check before they go back in the hopper: spent media and dust from the work should be kept out of the fresh batch.

What is the finest glass bead in this size chart?

Two picks share the fine end: the #10 at 100-170 mesh and the BALLOTINI Fine at 90 to 150 micron, and the BALLOTINI part number names the same band as AE (100-170). Mesh and micron ranges describe the same beads in different units, so compare beads by the unit the maker states rather than mixing the two.

What nozzle angle does the #8 maker state for cleaning?

The #8 maker states cleaning works at a 45 to 60 degree nozzle angle. Hold the angle the maker states and keep the pass even across the surface.

Related: glass bead vs aluminum oxide blasting media, garnet vs plastic blasting media, best blasting media, and the metal fab tools hub.

More buying guides

Metal Fab Tools ·

Blasting Media Chart: Types and Grit Sizes

A blasting media chart for walnut shell and aluminum oxide, with grit sizes, hardness and what each media suits, plus the listings compared.