Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Buffing Wheel Color Chart: What Each Color Means

Denim cuts, yellow and white cotton polish, and flannel finishes, while black, brown, white and green compounds run coarse to fine.

Buffing Wheel Color Chart: What Each Color Means
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 18PCS 8 Inch Buffing & Polishing Wheel Kit8PCS 8 Inch Buffing & Polishing Wheel Kit9.6/10View on Amazon
  2. 2Ceeintee 6 Pack 8 Inch Polishing Wheel for BenchCeeintee 6 Pack 8 Inch Polishing Wheel for Bench9.6/10View on Amazon

A weld bead that still shows scratches after the grinder, a stainless bracket that needs a mirror shine, a brass fitting gone dull. The buffing wheel color chart is the shortcut through that job: each wheel color and each compound color stands for one stage, from cutting scratches out to the final shine. Match the color to the stage and the metal.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

8PCS 8 Inch Buffing & Polishing Wheel Kit

8PCS 8 Inch Buffing & Polishing Wheel Kit

CHEGIF9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-piece kit with 4 buffing wheels and 4 compounds covering the full color chart, from coarse denim to final flannel, for an 8-inch bench grinder.

Pros

  • 4 wheels from coarse denim to final flannel, covering every chart stage
  • 4 compounds from coarse black to fine green
  • 8-inch wheels with a 1/2 inch arbor hole
  • Fits angle grinders, drill presses and other rotary power tools

Cons

  • No warranty term is stated
  • 1/2 inch arbor only, as listed
  • One wheel of each type, with no spare of any stage
  • 8-inch wheels only
Ceeintee 6 Pack 8 Inch Polishing Wheel for Bench

Ceeintee 6 Pack 8 Inch Polishing Wheel for Bench

Ceeintee9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-piece set with 3 polishing wheels and 3 compounds for an 8-inch bench grinder, on a 5/8 inch arbor hole.

Pros

  • Yellow, white and flannel wheels, the chart's medium, fine and final colors
  • 3 compounds: brown, white and green for different metals
  • 5/8 inch arbor hole mounts directly on an 8-inch bench grinder
  • Thick stitching and layered cotton thread for a longer wheel life, as the maker lists

Cons

  • No warranty term is stated
  • No denim wheel and no black compound for coarse cutting
  • 5/8 inch arbor hole, and a tapered grinder needs an adapter
  • Flying hairs on first use, as the maker notes

The buffing wheel color chart

Two color systems share one bench. The CHEGIF kit (on Amazon) lists its wheels in stages, from coarse denim to final flannel, and its compounds from coarse to fine, while the Ceeintee set lists each compound color for certain metals. Read the chart that way: wheel color for the stage, compound color for the coarseness or the metal. Work from coarse to fine through the stages the part needs.

Color What it is Stage Use it for
Denim Woven cotton Coarse cutting Removing scratches
Yellow cotton Cotton Medium polishing Cutting light scratches
White cotton Cotton Fine polishing Bright finish
Flannel Soft Final finish Final shine
Black compound Coarse paste Coarse cutting Coarse cutting
Brown compound Cutting paste Cutting Aluminium, stainless steel
White compound Fine paste Fine polishing Soft metals, jewellery
Green compound Finishing paste Final finish Hard metals

The two kits here list different ply counts for the same wheel colors, so read a wheel by its material and stage, not by its ply number alone.

How to read the chart

Start with the wheel and compound that match the worst marks on the part, then step through in order. In the CHEGIF kit the compounds run coarse to fine with the wheels; in the Ceeintee set each compound is listed for certain metals, so match the compound to the metal as well as the stage. Jumping straight from a coarse wheel to flannel leaves the deep marks in place.

Wheel colors, coarse to fine

  • Denim. The coarse wheel here, for cutting out scratches.
  • Yellow cotton. The medium wheel, for cutting light scratches after grinding.
  • White cotton. The fine wheel, for a bright finish.
  • Flannel. The soft wheel, for the final shine.

Both kits here are 8-inch wheels for a bench grinder, the CHEGIF kit with a 1/2 inch arbor hole and the Ceeintee set with a 5/8 inch arbor hole, so check the arbor on your grinder before ordering. See our best bench grinder guide for the machine side of the job.

Compound colors, coarse to fine

  • Black. The coarsest paste here, for coarse cutting.
  • Brown. The cutting paste for aluminium and stainless steel.
  • White. The fine paste for soft metals and jewellery.
  • Green. The finishing paste for hard metals.

Press the paste onto the wheel and let friction and heat draw it onto the wheel, as the maker describes.

The two kits side by side

Wheels Compounds Arbor hole Pieces
CHEGIF 8-Piece Buffing Kit Denim, yellow, white, flannel Black, brown, white, green 1/2 inch 8
Ceeintee 6-Piece Polishing Set Yellow, white, flannel Brown, white, green 5/8 inch 6

Only the CHEGIF kit has a denim wheel and a black compound, so only it covers the coarse stage.

The gear

The two kits below cover the chart between them: one holds every wheel and compound color, the other the yellow, white and flannel wheels and the brown, white and green compounds.

How to use the chart on the bench

Mount the wheel and check the arbor hole matches the mandrel before switching on. Start with the coarsest stage the part needs and work through the chart in order, changing wheels and compounds as you go. Keep the work clamped, wear eye protection, and keep gloves away from the spinning wheel, with the guards in place.

FAQ for welders

What does the yellow buffing wheel do?

The yellow cotton wheel is the medium stage, polishing after grinding and cutting light scratches, between the coarse denim wheel and the fine white wheel.

Which compound goes on a white wheel?

Neither listing pairs a compound to a wheel by matching colors. The white compound is listed for soft metals and jewellery, and the white cotton wheel is the fine-polishing wheel in the CHEGIF kit, so match the compound to the metal and the stage, not to the wheel color.

Can one wheel do every stage?

No. A coarse wheel leaves marks a fine wheel must remove, and a soft flannel wheel is listed for final polishing, not for cutting out scratches. Use the wheels in order.

What arbor hole do these wheels need?

The CHEGIF kit lists a 1/2 inch arbor hole and the Ceeintee set a 5/8 inch arbor hole. Both kits are 8-inch wheels for a bench grinder, so check the arbor on your grinder before ordering.

Which kit covers the whole chart?

The CHEGIF kit covers every stage, with all four wheels and all four compounds. The Ceeintee set covers the medium, fine and final stages, with yellow, white and flannel wheels and brown, white and green compounds.

Related: types of buffing wheel, cotton vs sisal buffing wheel, best buffing wheel for metal, and the metal fab tools hub. Also see our best polishing wheel for aluminum.

More buying guides