Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Metal Number Stamp Set (2026)

Five steel metal stamp sets for shop marking, compared on stated character size, piece count, steel type, hardness where stated, case and the warranty each listing states.

Best Metal Number Stamp Set (2026)
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HORUSDY 37-PieceMost PiecesHORUSDY 37-Piece9.7/10View on Amazon
  2. 2OWDEN 36-PieceStated HardnessOWDEN 36-Piece9.6/10View on Amazon
  3. 3uxcell 12.5 mmBig Charactersuxcell 12.5 mm9.5/10View on Amazon

A part leaves the bench and needs your mark on it: a serial, a date, a pair of initials that stays legible through paint, oil and a grinder pass. The best metal number stamp set puts that mark in with hammer and punch, one character at a time, deep enough to read after the job is done. This roundup compares five steel number and letter punch sets on what each listing states: character size, piece count, steel type, hardness where stated, case and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Most Pieces HORUSDY 37-Piece: 37 pieces with letters A-Z, numbers and a star symbol in high-strength steel, a storage case with a spaced layout, and the only stated warranty here, 2 years. Check price on Amazon
  • Stated Hardness OWDEN 36-Piece: Alloy steel with a stated HRC 58-62 hardness, 36 pieces at 1/4 inch, and a sturdy plastic case; the set weighs 2.94 lb. Check price on Amazon
  • Big Characters uxcell 12.5 mm: The only 1/2 inch character set here, 9 number punches in 45# steel for larger marks on soft metal, with a box included. Check price on Amazon

The machines

HORUSDY 37-Piece Easy-to-Pick Metal Letter

HORUSDY 37-Piece Easy-to-Pick Metal Letter

HORUSDY9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 37-piece set of 1/4 inch steel stamps with letters, numbers and a star symbol, spaced out in a storage case for quick picks, with a 2 year warranty stated.

Pros

  • 37 pieces: A-Z letters, 0-8 numbers and a star symbol
  • Spaced layout in the case for fast, confident picks
  • High-strength steel stated for repeated hammer strikes
  • 2 year manufacturer warranty, the only stated term here

Cons

  • No 9 punch of its own; flip the 6
  • Steel grade beyond high-strength is not stated
  • 16 oz set weight, heavier than the 13.44 oz YKLP set
  • Marks metal and more, not a deep engraving tool
OWDEN Professional 36Pcs Steel Metal Stamps Set

OWDEN Professional 36Pcs Steel Metal Stamps Set

OWDEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36-piece alloy steel set at 1/4 inch with a stated HRC 58-62 hardness, packed in a sturdy plastic case for steel, aluminum, brass and more.

Pros

  • Stated HRC 58-62 hardness, the only hardness figure here
  • Alloy steel for steel, aluminum, brass, copper and stainless
  • 36 pieces: 26 letters, a symbol and 9 numbers
  • Sturdy plastic case with sanding finished stamps

Cons

  • No 9 punch of its own; the reverse 6 serves as 9
  • Weighs 2.94 lb, more than the others here
  • No warranty term is stated
Metal Letter Punch Set 1/4 (6mm),36PC Steel Number

Metal Letter Punch Set 1/4 (6mm),36PC Steel Number

LEIMO KPARTS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 36-piece alloy steel set at 1/4 inch with a sand-blasted finish, 26 letters and 9 numbers in a compact box for metal, wood and leather.

Pros

  • 36 pieces of alloy steel with a sand-blasted finish
  • 1/4 inch square shank punches built for hammer striking
  • States copper, brass, aluminum and mild steel use
  • Compact 2.52 inch cube box for the drawer

Cons

  • No hardness figure like the HRC 58-62 OWDEN states
  • No 9 punch of its own; the reverse 6 serves as 9
  • No warranty term is stated
YKLP 1/4" Metal Number Stamps Set

YKLP 1/4" Metal Number Stamps Set

YKLP9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 9-piece number-only set at 1/4 inch in heat-treated carbon steel, each punch engraved with its sizing details, in a hard plastic case.

Pros

  • Number-only set aimed squarely at the keyword
  • Carbon steel with differential heat treatment stated
  • Each punch engraved with sizing details
  • Durable hard plastic storage case

Cons

  • Letters not included; numbers only
  • No 9 punch of its own; the reverse 6 serves as 9
  • No hardness figure is stated
  • No warranty term is stated
uxcell Number Metal Stamp Set 1/2" 12.5mm,Digital

uxcell Number Metal Stamp Set 1/2" 12.5mm,Digital

uxcell9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The only 1/2 inch set here: 9 number punches in 45# steel for larger, bolder marks on soft metals, wood and leather.

Pros

  • 1/2 inch, 12.5 mm characters, the largest here
  • 45# steel, sandblast finished, hardened per the listing
  • 9 number punches with a box included
  • Listing states a 10,000 striker design life

Cons

  • Stainless steel is not suitable, per the listing
  • No 9 punch of its own; the 6 doubles as 9
  • The bullets call them capital letter stamps, though they are numbers
  • No warranty term is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Character size Pieces Steel Case Set weight Warranty
HORUSDY 37-Piece 9.7/10 1/4 in (6 mm) 37 High-strength steel Storage case 16 ounces 2 years
OWDEN 36-Piece 9.6/10 1/4 in (6 mm) 36 Alloy steel, HRC 58-62 Plastic case 2.94 lb Not stated
LEIMO KPARTS 36P 9.6/10 1/4 in (6 mm) 36 Alloy steel, sand-blasted Box 1.16 kg Not stated
YKLP 9-Piece 9.5/10 1/4 in (6 mm) 9 Carbon steel, heat treated Hard plastic case 13.44 oz Not stated
uxcell 12.5 mm 9.5/10 1/2 in (12.5 mm) 9 45# steel, sandblast Box 2.49 lb Not stated

Ratings in this table are the makers’ own claims taken from each product page (23 October 2026).

Buying guide: picking the best metal number stamp set

Character size

Four sets here stamp 1/4 inch characters, 6 mm per the listings, the common size for marking small parts, tags and tool bodies. The uxcell set stamps 1/2 inch characters, 12.5 mm, for marks you need to read from farther away. Bigger characters need a harder hit and a steady hand, so match the size to the parts you mark most.

Piece count and what is missing

Three sets bundle letters and numbers together, 36 or 37 pieces, so one box covers names, dates and serials. The HORUSDY adds a star symbol to its 37 pieces. Two sets are numbers only, nine pieces each, for date codes and serials. Check the listing for the 9: every set here includes 0 through 8 and tells you to flip the 6 for a 9, so a true 9 punch is not in any box.

Steel and hardness

The listings state steel in different ways. OWDEN is the only one to state a hardness number, HRC 58-62 for its alloy steel. HORUSDY states high-strength steel, LEIMO states alloy steel with a sand-blasted finish, YKLP states carbon steel with differential heat treatment, and uxcell states 45# steel, sandblast finished and harder than carbon steel per its listing. The uxcell listing also says stainless steel is not suitable for its punches, while OWDEN lists stainless steel among its materials. Harder punches hold their edges longer but can chip if struck at an angle.

Case and organization

Every set here ships with a case or box: HORUSDY with a compact storage case, OWDEN with a sturdy plastic case, YKLP with a durable hard plastic storage case, and LEIMO and uxcell each with a box. HORUSDY spaces its stamps out in the case so each one is easy to grab. A case matters because a mixed-up drawer of punches slows every marking job down.

Hammering straight

None of these listings includes a hammer, so plan on your own shop hammer. Strike the punch square and firm; a glancing blow blurs the character. The YKLP stamps are engraved with their sizing details, which helps you grab the right digit without squinting. Wear eye protection and gloves when you swing, like any other striking job in the shop.

Before You Strike an Arc

  • Confirm the character size on arrival: the listings state 1/4 inch on four sets and 1/2 inch on the uxcell.
  • Count the pieces against the listing: 37 for HORUSDY, 36 for OWDEN and LEIMO, 9 for YKLP and uxcell.
  • Check each punch face for clean, sharp characters before the first job.
  • Practice on scrap of the same metal to set your striking force before marking the real part.
  • Keep the set in its case so characters stay sorted and edges stay protected.

FAQ for welders

How do you stamp metal with a punch set?

Set the punch square on the metal, hold it upright, and strike the top firmly with a hammer. One solid hit leaves a clean character. Restriking off center blurs the mark, so practice on scrap first to learn how hard your metal needs to be hit.

How do you use a metal stamp set?

Lay the part on a hard, flat surface, choose the character, and hold the punch vertical while you strike. Work left to right and keep the punches in order so dates and serials read correctly. The sets here come with a case, so return each punch to its slot as you go.

Can these stamps mark stainless steel?

It depends on the set. OWDEN lists stainless steel among the materials its punches mark. The uxcell listing says stainless steel is not suitable for its 45# steel punches. For hard metals, pick the set whose listing names that metal and strike on a solid backing.

Do number stamp sets include a 9?

Not as its own punch, in any of these five. Each set includes 0 through 8 and tells you to flip the 6 for a 9. If your date codes run heavy on 9s, plan on the extra care that flip takes.

Related: metal fab tools, best cut resistant gloves and best locking slip joint pliers.

Scoring, line by line

Each set is scored on performance, build, value, safety listing and warranty, following the weights our How We Pick page explains. Metal stamp sets carry no electrical safety listing to state, so every set here scores zero on that criterion and the ranking comes from the other four. A stated warranty with a concrete term earns warranty points; only one listing here states one.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
HORUSDY 37-Piece 9.7 29 21 21 n/a 3
OWDEN 36-Piece 9.6 29 21 20 n/a 0
LEIMO KPARTS 36P 9.6 28 20 20 n/a 0
YKLP 9-Piece 9.5 27 20 20 n/a 0
uxcell 12.5 mm 9.5 26 19 19 n/a 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Metal Fab Tools ·

Best 3/8 Inch Metal Stamp Set (2026)

4 stamp sets in 3/8 inch compared by characters, steel, hardness, case and warranty for marking metal, leather and wood.