Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Locking Slip Joint Pliers: 4 Pliers That Grip

Four locking slip joint pliers compared by jaw design, adjustment, grip and warranty, for a grip that does not slip.

Best Locking Slip Joint Pliers: 4 Pliers That Grip
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1IRWIN GrooveLock 6inBest WarrantyIRWIN GrooveLock 6in9.6/10View on Amazon
  2. 2IRWIN Vise-Grip 2-PieceBest 2-PieceIRWIN Vise-Grip 2-Piece9.6/10View on Amazon
  3. 3KNIPEX TwinGrip 8inBest for Stripped ScrewsKNIPEX TwinGrip 8in9.5/10View on Amazon
  4. 4WORKPRO 2-Piece 7 and 10inBest Value SetWORKPRO 2-Piece 7 and 10in9.5/10View on Amazon

A nut that rounds off under a wrench, a pipe that spins in your grip, a stripped screw that laughs at screwdrivers. These are the moments that call for locking slip joint pliers: jaws that adjust to fit the work, then clamp down and stay put without constant hand pressure. The best locking slip joint pliers grip round, flat, square and hex shapes without slipping, adjust in seconds, and feel good during long jobs. We compared four listings on jaw design, adjustment mechanisms, grip comfort and stated warranties, using only what each listing publishes. From 6-inch compact pliers to 10-inch leverage monsters, the four picks cover small work and heavy gripping alike.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • Best Warranty IRWIN GrooveLock 6in: 6-inch GrooveLock with limited lifetime warranty Check price on Amazon
  • Best 2-Piece IRWIN Vise-Grip 2-Piece: 8 and 10-inch V-jaw pair, 2X fast adjustment Check price on Amazon
  • Best for Stripped Screws KNIPEX TwinGrip 8in: TwinGrip front jaw grips damaged fasteners Check price on Amazon
  • Best Value Set WORKPRO 2-Piece 7 and 10in: 7 and 10-inch Cr-V pair, 12 positions Check price on Amazon

The machines

IRWIN VISE-GRIP Tools GrooveLock Pliers, V Jaw

IRWIN VISE-GRIP Tools GrooveLock Pliers, V Jaw

IRWIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch GrooveLock plier with V-jaw, anti-pinch grips and a limited lifetime warranty. The multi-groove ratcheting system offers twice the positions of standard groove joints.

Pros

  • Limited lifetime warranty stated
  • Anti-pinch ProTouch grips
  • V-jaw grips all shapes
  • 2X faster adjustment

Cons

  • Single 6-inch plier only
  • 0.13 kg is light
  • No jaw capacity stated
  • Metal handles may feel cold
IRWIN Tools Vise-Grip GrooveLock Pliers Set

IRWIN Tools Vise-Grip GrooveLock Pliers Set

IRWIN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece Vise-Grip GrooveLock set with 8-inch and 10-inch pliers, V-jaws and ProTouch grips. Each pair adjusts from the open position by pushing the handle.

Pros

  • 8-inch and 10-inch pair
  • V-jaw for all shapes
  • 2X faster adjustment
  • Anti-pinch ProTouch grips

Cons

  • Warranty has no term stated
  • 635 g for the set
  • Plastic material listed
  • Two pliers to store
KNIPEX 82 01 200 TwinGrip Pliers

KNIPEX 82 01 200 TwinGrip Pliers

KNIPEX9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-inch TwinGrip plier with front and side jaws, push-button adjustment and 5 positions. It is 8 inches long with a padded grip for comfort. The opposing teeth maximize force on tough materials.

Pros

  • Front and side gripping jaws
  • Grips stripped screws
  • 5 push-button adjustments
  • Listing claims the only 5-adjustment push-button slip joint pliers on the market

Cons

  • No warranty term stated
  • Single plier only
  • 0.02 kg seems light
  • Blend material not detailed
WORKPRO 2 Piece Groove Joint Pliers Set

WORKPRO 2 Piece Groove Joint Pliers Set

WORKPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece groove joint set with 7-inch and 10-inch pliers, V-jaws and 12 adjustment positions. Jaw capacities reach 1-3/8 and 1-9/16 inches.

Pros

  • 7-inch and 10-inch pair
  • 12 adjustment positions
  • V-jaw with angled teeth
  • Chrome vanadium steel

Cons

  • No warranty term stated
  • 11.36 oz for the pair
  • Plastic-dipped handles
  • Two pliers to store

Other welders and gear to compare

Spec sheet comparison

Pliers Jaw Sizes Grip Warranty
IRWIN GrooveLock 6in V-jaw 6 in ProTouch anti-pinch Limited lifetime
IRWIN Vise-Grip 2-Piece V-jaw 8 and 10 in ProTouch anti-pinch Not stated
KNIPEX TwinGrip 8in Front and side 8 in Padded Not stated
WORKPRO 2-Piece 7 and 10in V-jaw 7 and 10 in Bi-material Not stated

All specs here repeat what the maker rates and the listing prints, copied down 23 October 2026.

Buying guide: choosing the best locking slip joint pliers

The right pliers depend on the job: jaw design for grip, adjustment for speed, and handle comfort for long sessions. Here is what the listings tell us.

Jaw design matters

The IRWIN 2-piece and 6-inch use V-jaws that grip round, flat, square and hex shapes with multiple contact points. The KNIPEX TwinGrip combines front and side gripping in one tool, with the front jaw specifically designed for stripped screws and the side jaws using opposing teeth for maximum force. The WORKPRO 2-piece uses a V-jaw with powerful angled teeth that bite into pipes, rods, shafts and fasteners. Match the jaw to your work: V-jaws for all-around versatility, the TwinGrip for damaged or stubborn fasteners, angled teeth for pipe work.

Adjustment speed

The IRWIN GrooveLock pliers use a press-and-slide button that adjusts twice as fast as traditional groove joints, with a ratcheting action. The KNIPEX has a push-button with 5 adjustment positions. The WORKPRO 2-piece uses a spring-loaded push-button with 12 positions. Faster adjustment means less fumbling under the hood or under the sink.

Locking vs non-locking

True locking pliers clamp and hold without hand pressure; slip joint pliers adjust the jaw opening. The listings here blend both: the IRWIN GrooveLock and WORKPRO 2-piece use groove joints with locking-style adjustment, while the KNIPEX TwinGrip uses a push-button slip joint. For work where you need both hands free, a locking mechanism matters; for quick gripping, the slip joint suffices.

Grips and comfort

The IRWIN pliers have ProTouch grips that are anti-pinch and non-slip. The WORKPRO 2-piece uses bi-material handles. The KNIPEX has padded grips. If you use pliers all day, anti-pinch matters; for occasional use, any comfort grip works.

FAQ for welders

What are locking slip joint pliers?

They are pliers with adjustable jaws that lock onto the workpiece. The slip joint allows the jaw opening to adjust, and the locking mechanism holds it tight.

Which is better for stripped screws?

The KNIPEX TwinGrip: its front jaw is specifically designed to grip stripped screws.

Do any have a lifetime warranty?

The IRWIN 6-inch GrooveLock lists a limited lifetime warranty. The IRWIN 2-piece lists ‘Warranty’ with no term stated.

What size should I get?

The sets cover 6, 7, 8 and 10 inches. A 10-inch gives more leverage for stubborn fasteners; a 6-inch fits tight spaces like under sinks. The 2-piece sets cover both ends. For automotive work, the 10-inch is the workhorse; for electronics or detail work, the 6-inch wins.

Are these good for plumbing?

Yes. The WORKPRO 2-piece is explicitly listed for plumbing, with V-jaws that grip pipes and angled teeth that bite in. The IRWIN sets also suit plumbing with their V-jaws. For smooth chrome fixtures, wrap the jaws to avoid marring.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty. For pliers, safety means anti-pinch grips; two listings state them. One listing states a limited lifetime warranty; one lists ‘Warranty’ with no term, which scores zero.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
IRWIN GrooveLock 6in 9.6 29 20 19 5 4
IRWIN Vise-Grip 2-Piece 9.6 32 21 21 5 0
KNIPEX TwinGrip 8in 9.5 33 21 18 0 0
WORKPRO 2-Piece 7 and 10in 9.5 30 20 20 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

More welding guides

See every welding table and cart guide.

More picks: locking pliers sets, groove joint pliers.

More buying guides