Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Band Saw Blade for Aluminum (2026): 5 Picks for Soft Metal

Five band saw blades for aluminum work, compared on stated size, TPI, blade type and count, so your teeth match your stock.

Best Band Saw Blade for Aluminum (2026): 5 Picks for Soft Metal
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1POWERTEC 80in Bi-Metal 14TPIBest OverallPOWERTEC 80in Bi-Metal 14TPI9.6/10View on Amazon
  2. 2FOXBC 35-3/8in M42 10/14Best Portable PickFOXBC 35-3/8in M42 10/149.6/10View on Amazon
  3. 3Bosch BS62-18MABest Soft-Metal BladeBosch BS62-18MA9.5/10View on Amazon
  4. 4Oniguard 35-3/8in 8-10Best Thick-Metal PickOniguard 35-3/8in 8-109.5/10View on Amazon
  5. 5FOXBC 80in Carbon 14TPIBest Carbon 2-PackFOXBC 80in Carbon 14TPI9.4/10View on Amazon

Aluminum cuts fast but gums up a blade quickly: the soft metal welds itself to the teeth, loads the gullets and turns a good cut into a smeared mess. The best band saw blade for aluminum is the one whose tooth pitch and blade type match your stock, so the teeth clear chips instead of packing them. This guide compares five blades on what each Amazon listing states: size, TPI, blade type, count and the warranty each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall POWERTEC 80in Bi-Metal 14TPI: Bi-metal M42 for non-ferrous metal, 14 TPI raker set, 80 inch for 12 inch saws. Check price on Amazon
  • Best Portable Pick FOXBC 35-3/8in M42 10/14: Bi-metal M42 portable blade, 10/14 TPI variable pitch, 3-pack for Milwaukee portables. Check price on Amazon
  • Best Soft-Metal Blade Bosch BS62-18MA: Engineered for soft-metal cutting including aluminum, 62 inch 18 TPI for stationary saws. Check price on Amazon
  • Best Thick-Metal Pick Oniguard 35-3/8in 8-10: Bi-metal 8-10 TPI for thick metal, 3-pack, lists aluminum and soft alloys in scope. Check price on Amazon
  • Best Carbon 2-Pack FOXBC 80in Carbon 14TPI: Carbon steel 14 TPI hook tooth, 2-pack for Craftsman 12 inch saws; aluminum not named. Check price on Amazon

The machines

POWERTEC 80 Inch Bi-Metal Bandsaw Blades

POWERTEC 80 Inch Bi-Metal Bandsaw Blades

POWERTEC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 80 inch bi-metal M42 blade designed for non-ferrous metal, with 14 TPI raker set teeth for 12 inch band saws.

Pros

  • Designed for non-ferrous metal: aluminum, copper, lead, zinc, tin
  • Bi-metal M42 cobalt steel, triple tempered
  • 14 TPI raker set for even cutting
  • 80 x 1/2 inch fits common 12 inch saws

Cons

  • Single blade, no multi-pack option
  • No warranty term in the listing
  • 1/2 inch width only
FOXBC 35-3/8 Inch Bandsaw Blade 10/14 TPI

FOXBC 35-3/8 Inch Bandsaw Blade 10/14 TPI

FOXBC9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 35-3/8 inch bi-metal M42 blades with 10/14 TPI variable pitch for Milwaukee portable band saws.

Pros

  • Bi-metal M42 high speed steel
  • 10/14 TPI variable pitch hook teeth
  • 3-pack, a good spare count
  • Made for Milwaukee portable band saws

Cons

  • Aluminum not named; only metal in general
  • No warranty term in the listing
  • Portable-saw length only
Bosch BS62-18MA 62 in. 18 TPI Metal-Cutting

Bosch BS62-18MA 62 in. 18 TPI Metal-Cutting

Bosch9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 62 inch 18 TPI metal-cutting blade engineered for soft-metal cutting including aluminum, for stationary band saws.

Pros

  • Engineered for soft-metal cutting: aluminum, copper, bronze
  • 18 TPI for fine cuts in thin stock
  • Laser-cut manufacturing to exacting specs, per the maker
  • Fits many standard stationary band saws

Cons

  • Single blade at this listing
  • Warranty field only points to the maker's website
  • Blade material field reads only Blend
  • No tooth set or hook profile stated
for Milwaukee 48-39-0609 35-3/8" 8-10 TPI Extreme

for Milwaukee 48-39-0609 35-3/8" 8-10 TPI Extreme

Oniguard9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 35-3/8 inch bi-metal blades with 8-10 TPI for thick metal, listing aluminum and soft alloys among materials cut.

Pros

  • 8-10 TPI variable pitch for thick metal
  • Bi-metal blade, 3-pack
  • Lists aluminum and soft alloys as materials cut
  • Fits Milwaukee portable saws

Cons

  • 3X life and 2X faster claims are marketing, not measured
  • No warranty term in the listing
  • Coarse pitch is not for thin stock
FOXBC 80 Inch x 1/4 Inch x 14 TPI Bandsaw Blades

FOXBC 80 Inch x 1/4 Inch x 14 TPI Bandsaw Blades

FOXBC9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 80 inch carbon steel blades with 14 TPI hook teeth for Sears Craftsman 12 inch band saws.

Pros

  • 2-pack, a spare on hand
  • 14 TPI hook tooth profile for fine cuts
  • Fits Sears Craftsman 12 inch saws
  • Carbon steel with heat resistance and weld, per the maker

Cons

  • Carbon steel, not bi-metal
  • Aluminum not named; only non-ferrous metals in general
  • No warranty term in the listing
  • 1/4 inch width is narrow for resawing

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Size TPI Blade Count Warranty
POWERTEC 80in Bi-Metal 14TPI 9.6/10 80 x 1/2 in 14 Bi-metal M42 1 None stated
FOXBC 35-3/8in M42 10/14 9.6/10 35-3/8 x 1/2 in 10/14 Bi-metal M42 3 None stated
Bosch BS62-18MA 9.5/10 62 x 3/8 in 18 Not stated 1 None stated
Oniguard 35-3/8in 8-10 9.5/10 35-3/8 x 1/2 in 8-10 Bi-metal 3 None stated
FOXBC 80in Carbon 14TPI 9.4/10 80 x 1/4 in 14 High carbon steel 2 None stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 21 October 2026.

Buying guide: what matters in the best band saw blade for aluminum

Bi-metal vs carbon steel

Three picks here are bi-metal (POWERTEC, FOXBC 35-3/8, Oniguard) and one is carbon steel (FOXBC 80 inch); the Bosch does not name its steel. Bi-metal blades pair a hard tooth edge with a flexible back, so they hold an edge longer on metal. For regular aluminum cutting, the bi-metal picks are the better long-term read of these listings.

Tooth pitch

Pitches here run from 8-10 TPI on the Oniguard to 18 TPI on the Bosch, with 14 TPI on the POWERTEC and FOXBC 80 inch and a 10/14 variable pitch on the FOXBC portable. Coarser pitches clear chips from thick stock; finer pitches suit thin stock. The variable pitch blades split the difference across thicknesses.

Blade length and saw fit

Two blades are 80 inch for 12 inch stationary saws (POWERTEC, FOXBC carbon), one is 62 inch for stationary saws (Bosch), and two are 35-3/8 inch for portable band saws (FOXBC, Oniguard). Measure your saw’s blade length first: a blade that does not match will not tension correctly.

Does the listing name aluminum?

The POWERTEC names aluminum explicitly among non-ferrous metals, the Bosch names it under soft-metal cutting, and the Oniguard lists aluminum and soft alloys. The two FOXBC listings name metal or non-ferrous metals in general. When the listing names your material, you can buy with more confidence.

Before You Strike an Arc

  • Match the blade length to your saw; 80 inch, 62 inch and 35-3/8 inch blades are not interchangeable.
  • Use a cutting fluid or wax stick on aluminum to keep the teeth from loading; the listings do not state one, so pick your own.
  • Confirm the TPI on arrival where a listing’s own figures disagree, as on the POWERTEC and FOXBC portable.
  • Let the blade feed at its own pace; forcing aluminum packs the gullets and kills the cut.
  • Unplug the saw before changing blades, and check the tension per your saw’s manual.

FAQ for welders

What TPI is best for cutting aluminum?

It depends on stock thickness. The picks here run from 8-10 TPI for thick metal to 18 TPI for thin stock, with 14 TPI in the middle. Coarser teeth clear chips from thick aluminum; finer teeth keep thin stock from snagging.

Can I cut aluminum with a wood bandsaw blade?

The FOXBC carbon listing names wood, plastic and non-ferrous metals, so light aluminum is in its stated scope. But a bi-metal blade holds its edge longer on metal, which is why the bi-metal picks here rank higher for aluminum work.

Do I need cutting fluid for aluminum?

None of these listings states a cutting fluid, but aluminum is known for loading teeth. A wax stick or cutting fluid keeps the gullets clear and extends blade life. Apply it before the cut, not after the blade loads.

Bi-metal or carbon steel for aluminum?

Bi-metal, per these listings’ logic: three bi-metal picks here pair hard teeth with a flexible back for longer edge life on metal. Carbon steel works for occasional cuts but dulls faster, which is why the carbon FOXBC trails the ranking.

How do I know what length blade my saw takes?

Check your saw’s manual or the old blade: 80 inch, 62 inch and 35-3/8 inch are all different saws here. The POWERTEC and FOXBC carbon fit 12 inch stationary saws, the Bosch fits stationary saws generally, and the FOXBC portable and Oniguard fit portable band saws.

Related: best band saw blade for metal, bi-metal vs carbide band saw blade, best chop saw blade for aluminum, best portable band saw for metal, best cut off wheel for aluminum, best horizontal band saw, and the metal fab tools hub.

Scoring, line by line

Each blade is scored on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these listings states a safety certification or a warranty term, so every pick here scores zero on those two criteria; the ranking comes from stated blade type, aluminum fit and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
POWERTEC 80in Bi-Metal 14TPI 9.6 29 21 20 n/a 0
FOXBC 35-3/8in M42 10/14 9.6 27 20 21 n/a 0
Bosch BS62-18MA 9.5 28 20 18 n/a 0
Oniguard 35-3/8in 8-10 9.5 26 19 20 n/a 0
FOXBC 80in Carbon 14TPI 9.4 24 19 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides

Metal Fab Tools ·

Types of Band Saw Blades and How to Choose

Band saw blades differ by tooth count, width, length and material, and this guide explains each type with figures from real listings so the…