Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Parts Washer Drum Mounted: Options and Fit

A parts washer drum mounted on a shop drum keeps the cleaning fluid under the work; this guide explains the setup, the fit checks, and the two picks that cover the wash and the scrubbing.

Parts Washer Drum Mounted: Options and Fit
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Jack Boss 3.5 Gallon Capacity Portable SteelJack Boss 3.5 Gallon Capacity Portable Steel9.6/10View on Amazon
  2. 2Parts Washer Brush with 31 Inch HoseParts Washer Brush with 31 Inch Hose9.4/10View on Amazon

A greasy gear or a carburetor caked in old varnish needs a wash before it goes back on the machine, and a parts washer drum mounted on a shop drum is one way to set that wash up. The drum holds the cleaning fluid, the washer sits on top, and dirty parts get scrubbed in the basin instead of on the bench. This guide explains that setup, what to check before you buy, and how the two picks here fit the job.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Jack Boss 3.5 Gallon Capacity Portable Steel

Jack Boss 3.5 Gallon Capacity Portable Steel

Jack Boss9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench-top steel cabinet washer with a 3.5 gallon reservoir and a 110V electric pump, sized for small parts such as wheel bearings, gears and carburetors.

Pros

  • 3.5 gallon fluid reservoir with a 110V electric pump that recycles liquid
  • Hinged lid with a fusible link that closes when not in use
  • Steel cabinet with an 18 x 13.5 x 9 inch work basin for small parts
  • 1 year limited manufacturer warranty stated in the listing

Cons

  • Not for use with flammable or combustible solvents such as mineral spirits
  • Spec table lists 18.0 x 18.0 x 9.0 inch dimensions, which disagrees with the basin size in the bullets
  • Basin suits small parts only, so larger parts fall outside the stated work area
  • Listing states no item weight
Parts Washer Brush with 31 Inch Hose

Parts Washer Brush with 31 Inch Hose

DECOHS9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A flow-through cleaning brush with a 31 inch hose that delivers solvent to the bristles for washing parts, on-engine cleaning and fluid evacuation.

Pros

  • 31 inch rubber hose delivers solvent directly to the bristles
  • 10.5 inch brush with PP bristles for deep crevices and stubborn deposits
  • Ergonomic threaded handle gives a firm grip
  • Suitable for most parts washers, per the listing

Cons

  • No warranty term is stated
  • Spec table lists 1.0 x 1.0 x 1.0 inch dimensions, which disagrees with the 31 inch hose and 10.5 inch brush in the bullets
  • No reservoir or pump is stated; it is a brush and hose only
  • Listing states no bristle life or replacement interval

What a Parts Washer Drum Mounted Setup Means

A drum mounted parts washer uses a drum as the base and the fluid reservoir, with the washing basin and pump mounted above it. That suits a small shop that already has a drum to spare. The two picks in this guide cover different parts of the wash job: one is a bench-top cabinet washer with its own reservoir and pump, and the other is a flow-through brush that fits most parts washers and puts solvent right on the part. Neither pick mounts to a drum, so no drum size is stated for either: the cabinet washer stands on the bench with its own reservoir, and the brush is an add-on for a washer.

Side by Side

Capacity Power Cleaning reach Warranty
Jack Boss 3.5 Gallon 3.5 gallon fluid reservoir 110V electric pump 18 x 13.5 x 9 inch basin 1 year limited manufacturer warranty
DECOHS Parts Washer Brush No reservoir stated No pump stated 31 inch hose, 10.5 inch brush No warranty stated

The cabinet washer is the complete unit here, with its own reservoir, pump and lid, while the brush is an add-on that needs a washer or fluid supply to work with. Read the basin size and the hose length against the parts you wash most before you choose.

Parts Washer Drum Mounted Gear for the Job

The cabinet washer handles the wash itself, and the brush handles the scrubbing and the tight spots the basin cannot reach.

How to Check Fit Before You Buy

Fit comes down to the parts you wash, the space on the bench, and the fluid you plan to use. Measure the largest part you clean regularly against the stated basin size.

  • Basin size. The Jack Boss basin measures 18 inches wide by 13.5 inches deep by 9 inches high, which suits small parts such as wheel bearings, gears and carburetors.
  • Hose reach. The DECOHS brush hose (on Amazon) measures 31 inches, with a 10.5 inch brush, so check that the hose reaches from the fluid supply to the part without stretching.
  • Power. The cabinet washer runs on a 110V electric pump, so it needs a matching outlet near the bench.
  • Fluid. The cabinet washer listing states it is not for use with flammable or combustible solvents such as mineral spirits, so match the fluid to that limit.
  • Mounting. Neither listing states a drum mount, so neither pick sits on a drum: the cabinet washer stands on the bench with its own reservoir, and the brush is an add-on for a washer.

See the metal fab tools hub for more shop gear in this category.

Solvent and Fire Safety

Cleaning fluid and a shop full of sparks do not mix well, so treat the washer like any other shop equipment near ignition sources. The Jack Boss lid is hinged with a fusible link and closes when not in use, which the listing states helps prevent accidental fire. Keep the lid closed when the washer is idle and store cleaning fluid away from welding work. Work with ventilation and keep the area clear of rags soaked in solvent.

FAQ for welders

What does parts washer drum mounted mean?

It means the washer mounts on a drum, and the drum holds the cleaning fluid below the washing basin. The setup suits a shop that already has a drum. The two picks in this guide are a bench-top cabinet washer with its own reservoir and a flow-through brush; neither pick mounts to a drum, so no drum size is stated for either.

Can the Jack Boss cabinet washer clean carburetors?

Yes, the listing names carburetors alongside wheel bearings and gears as the small parts cleaning jobs it suits. The basin measures 18 inches wide by 13.5 inches deep by 9 inches high, so the part has to fit that basin.

What solvents can I use in the cabinet washer?

The listing states the washer is not for use with flammable or combustible solvents such as mineral spirits and biodegradable cleaners. The listing names no fluid to use, so check the manual for the washer before filling it, and keep flammable solvents out of the cabinet.

Does the DECOHS brush fit most parts washers?

The listing states it is suitable for most parts washers. The brush measures 10.5 inches and the hose measures 31 inches, and the package includes 1 pc brush with hose.

What warranty does the cabinet washer carry?

The listing states a 1 year limited manufacturer warranty for the Jack Boss cabinet washer (on Amazon). The DECOHS brush listing states no warranty term.

Related: parts washer ultrasonic, the metal fab tools hub, and how we pick.

More buying guides