Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Clean Circular Saw Blades

A gummed-up blade cuts rough and strains the saw, so here is how to clean circular saw blades with a non-toxic cleaner and keep them cutting true.

How to Clean Circular Saw Blades
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TREND Tool, Blade & Bit Cleaner, 18 fl oz, ResinTREND Tool, Blade & Bit Cleaner, 18 fl oz, Resin9.6/10View on Amazon
  2. 2CMT CMT 998.001.03 Formula 2050 Blade & BitCMT CMT 998.001.03 Formula 2050 Blade & Bit9.6/10View on Amazon
  3. 3CMT Formula 2050 Blade and Bit CleanerCMT Formula 2050 Blade and Bit Cleaner9.6/10View on Amazon

A blade that drags through the cut, leaves burn marks and throws dust instead of chips may be dull, or it may just be dirty. Pitch and resin from the wood bake onto the teeth and the plate, and the blade starts to cut like a file instead of a saw. Learning how to clean circular saw blades takes that coating off. If the blade still drags once clean, the edge is dull and needs sharpening.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

TREND Tool, Blade & Bit Cleaner, 18 fl oz, Resin

TREND Tool, Blade & Bit Cleaner, 18 fl oz, Resin

TREND9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18 fl oz pump-action cleaner that lifts resin, pitch, rust and dirt without harsh scrubbing and leaves a light protective layer against rust.

Pros

  • Lifts resin, pitch, rust and dirt without harsh scrubbing
  • Leaves a light protective layer against rust and corrosion
  • Non-toxic, non-flammable formula with no strong odors
  • Pump-action bottle for controlled application; also works in dip tanks and ultrasonic cleaners

Cons

  • 18 fl oz bottle is small for dip tank work
  • Pump bottle, not a spray bottle, so coating a wide plate takes more passes
  • No larger size is stated for this cleaner
  • 30 day warranty is short
CMT CMT 998.001.03 Formula 2050 Blade & Bit

CMT CMT 998.001.03 Formula 2050 Blade & Bit

CMT ORANGE TOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 128 fl oz jug of the same Formula 2050 cleaner, for dip tanks and ultrasonic cleaners where several blades soak at once.

Pros

  • Removes pitch, resin and adhesive residue from saw blades and bits
  • Non-toxic, non-flammable and certified biodegradable
  • No rinse needed after cleaning
  • Gallon size suits dip tanks and ultrasonic cleaners for several tools at once

Cons

  • No warranty term is stated
  • Jug is heavy and awkward to pour from
  • No pump or spray applicator is stated; you need your own bottle or tank
  • Jug takes more shelf space than the bottle sizes
CMT Formula 2050 Blade and Bit Cleaner

CMT Formula 2050 Blade and Bit Cleaner

CMT ORANGE TOOLS9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 18 fl oz bottle of Formula 2050 that removes pitch, resin and adhesive residue with no rinse needed after cleaning.

Pros

  • Removes pitch, resin and adhesive residue from saw blades and bits
  • Non-toxic, non-flammable and certified biodegradable
  • No rinse needed after cleaning
  • Protects against rust and keeps the table saw top rust free

Cons

  • No warranty term is stated
  • 18 fl oz bottle is small for cleaning several blades at once
  • No applicator is stated; you supply your own spray bottle
  • Rust protection has no stated duration

How to Clean Circular Saw Blades Step by Step

Unplug the saw, or pull the battery, before you touch the blade, and wear eye protection while the blade is out of the saw. Lay the blade flat on a bench and brush off loose dust so the cleaner can reach the pitch. Coat the teeth and the plate with cleaner, using the pump bottle, a spray bottle or a dip tank, and give it time to lift the coating instead of scrubbing at it dry. Wipe the loosened pitch away with a rag, then wipe the blade dry so no moisture sits on the steel. A cleaner that leaves a light protective layer helps hold rust off between cleanings, and the blade goes back on the saw with the rotation arrow pointing the right way.

Side by side

TREND CLEAN/500 CMT Formula 2050 1 Gallon CMT Formula 2050 18 oz
Size 18 fl oz bottle 128 fl oz jug 18 fl oz bottle
Removes Resin, pitch, rust and dirt Pitch, resin and adhesive residue Pitch, resin and adhesive residue
Rinse after cleaning Not stated No rinse needed No rinse needed
Rust protection Light protective layer Protection stated Protection stated
Application Pump bottle, dip tank or ultrasonic cleaner Spray bottle, dip tank or ultrasonic cleaner Spray bottle, dip tank or ultrasonic cleaner
Warranty 30 days Not stated Not stated

The cleaners below all break down pitch and resin, and the differences are size, application and whether a rinse is needed. The bottle sizes suit bench work, while the gallon jug suits a dip tank.

The Gear for Cleaning Saw Blades

The cleaning steps above need a cleaner that lifts pitch without harsh scrubbing, and the picks below cover the pump bottle, the spray bottle and the gallon jug.

What to Look for in a Blade Cleaner

Start with size. An 18 fl oz bottle suits cleaning a blade on the bench, while the gallon jug, at 128 fl oz, suits a dip tank where several blades soak at once. Then check the application: a pump-action bottle gives controlled coats on the teeth, a spray bottle covers a wide plate fast, and dip tanks and ultrasonic cleaners handle a stack of tools with little effort. A no-rinse formula saves a step, since the CMT cleaners state that you do not rinse after cleaning. Rust protection matters too, since a clean blade is bare steel until it gets a light protective layer, and each cleaner here states rust or corrosion protection. Non-toxic, non-flammable formulas keep the bench safer, and each cleaner states that as well.

For more options, see our metal fab tools guides.

FAQ for welders

Can I clean a circular saw blade without removing it from the saw?

You can wipe the teeth with the saw unplugged, but taking the blade out cleans the plate and the gullets properly, and it keeps your hands away from a blade that could move. A dip tank or a flat bench makes the job easier, and the blade goes back on with the rotation arrow pointing the right way.

Do I need to rinse the blade after cleaning?

Not with the CMT cleaners here: the maker states that you do not rinse after cleaning, and the formula leaves rust protection behind. With the TREND cleaner, wipe the loosened pitch away and dry the blade, since the maker describes the cleaner lifting the coating off the surface without harsh scrubbing.

Will a blade cleaner damage the carbide teeth?

The cleaners here are made for saw blades and router bits. Both makers call them non-toxic, and the TREND maker says it lifts pitch without harsh scrubbing or aggressive citrus solvents. Avoid abrasive pads and wire brushes on the teeth, and let the cleaner do the work.

How often should I clean a circular saw blade?

Clean it when the cut starts to drag, the blade leaves burn marks, or you can see pitch building on the teeth and plate. A blade that cuts cleanly needs nothing more than a wipe, while a gummed-up blade benefits from a full clean before it goes back to work.

Can the same cleaner handle router bits and planer blades?

Yes. The TREND cleaner states that it suits saw blades, planer blades, router cutters, chisels, drill bits and files, and the CMT cleaners state that they remove pitch and resin from woodworking cutting tools such as saw blades and bits. One bottle covers the bench tools that gum up the same way a saw blade does.

Related: how to sharpen band saw blades and best saw blade for cutting metal roofing.

More buying guides