Best Abrasive Cloth Roll (2026): 5 Rolls Compared
Five abrasive cloth rolls compared by grit range, roll length, backing, and dispenser, from coarse 80 grit stock removal to 600 grit finishing.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallClebay 6-Grit Roll9.7/10View on Amazon - 2
Best Long RollBenchmark 150 ft Roll9.6/10View on Amazon - 3
Best Value SetBitbbro 6-Piece Roll9.6/10View on Amazon - 4
Best for PlumbingSCOTTCHEN Mesh Roll9.5/10View on Amazon
A weld bead cleans up slow when the joint still wears mill scale, and the grinder leaves a finish rougher than the paint wants. The best abrasive cloth roll tears off the bench in the length the job needs, from a coarse pass on a weld to a fine pass before paint. We compared abrasive cloth rolls by grit range, roll length, width, backing and dispenser, using only what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Clebay 6-Grit Roll: Six grits, 80 to 600, color-coded with a nylon backing Check price on Amazon
- Best Long Roll Benchmark 150 ft Roll: 150 ft of 80 grit aluminum oxide for stock removal Check price on Amazon
- Best Value Set Bitbbro 6-Piece Roll: Six grits, 118 ft total, with a dispenser box Check price on Amazon
- Best for Plumbing SCOTTCHEN Mesh Roll: Open-mesh silicon carbide roll for pipe prep Check price on Amazon
The machines

Emery Cloth Roll, 6 Grits 1 in x 19.7 ft Sandpaper
A 6-grit color-coded emery cloth assortment, 80 to 600 grit, 1 in by 19.7 ft rolls with a nylon cloth backing and a dispenser box.
Pros
- Six grits from 80 to 600, color-coded for fast selection
- Nylon cloth backing, tougher than regular sandpaper
- Works wet or dry on metal, wood, auto and furniture
- Five abrasive types, including ceramic and zirconia alumina
Cons
- No warranty term is stated
- No specific safety standard is stated
- Smallest roll length here at 19.7 ft per roll
- No roll weight is stated

Benchmark Abrasives 1-1/2" x 150’ Shop Roll Emery
A 150 ft shop roll of 80 grit aluminum oxide emery cloth, 1-1/2 in wide, with a resin-on-resin bond for stock removal and finishing.
Pros
- Longest roll here at 150 ft
- Aluminum oxide grains with a resin-on-resin bond
- Listing states it exceeds ANSI and EU European standards
- 1-1/2 in width covers more surface per pass
Cons
- No warranty term is stated
- Single grit only: 80 grit, no finer grits in the box
- No dispenser box is stated
- No wet use is stated

6 PCS Emery Cloth Roll Sandpaper with Dispenser
Six emery cloth rolls, 80 to 600 grit, 1 in by 19.7 ft each for 118 ft total, in aluminum oxide with a reinforced cloth backing and a dispenser.
Pros
- Six grits from 80 to 600 for rough grinding to fine polishing
- 118 ft total across 6 rolls
- Reinforced cloth backing, 18 to 45 mil thick
- Works wet or dry, by hand or with power tools
Cons
- No warranty term is stated
- No specific safety standard is stated
- Smallest roll length here at 19.7 ft per roll
- No grit-to-color coding is stated

Bates- Emery Cloth Roll, 1" x 26 FT, 5 Grits
Five emery cloth rolls, 150 to 600 grit, 1 in by 26 ft each, with a dispenser box for sanding, smoothing and polishing metal and wood.
Pros
- Five grits from 150 to 600 for sanding to fine finishing
- 26 ft per roll, longer than the 19.7 ft rolls here
- Dispenser box keeps rolls organized for clean tearing
- Five rolls in the set for detailed work and larger projects
Cons
- No warranty term is stated
- No specific safety standard is stated
- No 80 grit: the coarsest grit here is 150
- No wet use is stated

SCOTTCHEN Sanding Rolls/Plumbing Sanding Cloth
A single open-mesh silicon carbide sanding roll, 80 grit, 1-1/2 in by 33 ft, double-sided and waterproof for plumbing and hand sanding.
Pros
- Open mesh will not load up or clog
- Double-sided abrasive on a strong mesh
- Waterproof and washable for reuse, wet or dry
- Made for plumbers cleaning copper, brass and aluminum pipe before welding
Cons
- No warranty term is stated
- Single grit only: 80 grit, no finer grits
- Listing notes a few grains of sand fall during use
- No dispenser box is stated
Other welders and gear to compare
Benchmark Abrasives 1-1/2" x 150’ Shop Roll Emery ClothCheck price on Amazon
Benchmark Abrasives 1” X 150’ Shop Roll Emery Cloth SandpaperCheck price on Amazon
QYQRQF Emery Cloth RollCheck price on Amazon
ChampNet Waterproof Emery Cloth Roll Grit 120 Abrasive Wet ofCheck price on Amazon
POWERTEC Emery Cloth Sandpaper Roll 120 GritCheck price on Amazon
Spec sheet comparison
| Roll | Gear Score | Grits | Roll size | Total length | Backing | Dispenser |
|---|---|---|---|---|---|---|
| Clebay 6-Grit Roll | 9.7/10 | 80-600 (6 grits) | 1 in x 19.7 ft | 19.7 ft | Nylon cloth | Yes |
| Benchmark 150 ft Roll | 9.6/10 | 80 | 1-1/2 in x 150 ft | 150 ft | Not stated | Not stated |
| Bitbbro 6-Piece Roll | 9.6/10 | 80-600 (6 grits) | 1 in x 19.7 ft | 118 ft | Reinforced cloth | Yes |
| Bates 5-Grit Roll | 9.6/10 | 150-600 (5 grits) | 1 in x 26 ft | 5 rolls x 26 ft | Not stated | Yes |
| SCOTTCHEN Mesh Roll | 9.5/10 | 80 | 1-1/2 in x 33 ft | 33 ft | Open mesh | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (11 November 2026).
Buying guide: choosing the best abrasive cloth roll
Grit range
Grit decides the job: coarse grit removes stock, fine grit finishes. The Clebay and Bitbbro sets run 80 to 600 grit, the Bates set runs 150 to 600 grit, and the Benchmark and SCOTTCHEN rolls are 80 grit only. A set that starts at 80 covers both stock removal and finishing; a set that starts at 150 leaves the coarse work to another roll. For coarse work on a grinder, see our flap disc grit 80 guide.
Roll length and width
Length decides how long a roll lasts on the bench. The Benchmark shop roll runs 150 ft, the SCOTTCHEN roll runs 33 ft, the Bates rolls run 26 ft each, and the Clebay and Bitbbro rolls run 19.7 ft each, with the Bitbbro set totaling 118 ft across 6 rolls. Width runs 1 in on the Bates, Clebay and Bitbbro rolls and 1-1/2 in on the SCOTTCHEN and Benchmark rolls.
Backing and wet or dry
Backing decides whether a roll tears or lasts. The Clebay rolls use a flexible nylon cloth backing, and the Bitbbro rolls use a reinforced cloth backing, 18 to 45 mil thick. The SCOTTCHEN roll is an open mesh that will not load up or clog, and it is waterproof and washable for reuse. The Clebay and Bitbbro rolls state wet or dry use; the Bates and Benchmark listings state no wet use.
Dispenser or shop roll
Three sets come in a dispenser box: Bates, Clebay and Bitbbro. The box keeps the rolls organized and tears to the length needed. The Benchmark is a shop roll with no dispenser stated, and the SCOTTCHEN is a single roll with no dispenser stated. A dispenser suits a bench where grits change often; a shop roll suits a station that runs one grit all day.
What the listings leave out
None of the five listings states a warranty term, and none states a specific safety standard. The Benchmark listing states the rolls exceed ANSI and EU European standards, without naming a specific standard. The SCOTTCHEN listing notes a few grains of sand fall during use. The Bates and Benchmark listings state no wet use, and the Bates listing states no 80 grit.
Use as directed. Wear eye protection and a dust mask when sanding, keep the work area clear of dust and grit, and check the grit before the first pass on the workpiece. Never grind without eye protection, and keep cords clear of the work. See the OSHA welding overview.
Before You Strike an Arc
- Check the grit label on the roll before the first pass; coarse grit leaves marks a fine grit must remove.
- Check the roll length and backing when the box arrives; the dispenser sets tear to length, the shop roll needs a cut.
- Keep a coarse grit and a fine grit on the bench; the sets here run 80 to 600 grit.
- For pipe prep before welding, the open-mesh roll suits copper, brass and aluminum pipe.
- Store rolls dry in the dispenser box so the backing stays flexible.
FAQ for welders
What grit should I start with?
Start coarse for stock removal and step finer for finishing. The Clebay, Bitbbro, Benchmark and SCOTTCHEN listings state 80 grit for coarse work, and the Bates set starts at 150 grit. The Clebay and Bitbbro sets run to 600 grit for fine finishing.
Can these rolls be used wet?
The Clebay and Bitbbro rolls state wet or dry use, and the SCOTTCHEN roll states it is waterproof and washable and works dry and wet. The Bates and Benchmark listings state no wet use.
How long is each roll?
The Benchmark shop roll runs 150 ft, the SCOTTCHEN roll runs 33 ft, the Bates rolls run 26 ft each, and the Clebay and Bitbbro rolls run 19.7 ft each. The Bitbbro set totals 118 ft across 6 rolls.
What is the difference between emery cloth and sandpaper?
Emery cloth has a cloth backing where sandpaper has a paper backing. The Clebay listing states its nylon cloth backing is tougher than regular sandpaper, and the Bitbbro listing states its tear-resistant cloth backing outlasts regular paper sandpaper.
Do any of these rolls state a warranty?
No. None of the five listings states a warranty term. The Benchmark listing states the rolls exceed ANSI and EU European standards, without naming a specific standard, but that is not a warranty term.
Related: the metal fab tools hub and welding consumables. Also see our best mesh abrasive roll. Also see our best abrasive cartridge roll. Also see our best grinding disc for metal. Also see our best wire brush wheel. Also see our best flap disc grit 80. Also see our best respirator for grinding metal. Also see our angle grinder uses.
Scoring, line by line
Each roll is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing. No listing here states a specific safety standard or a warranty term, so safety and warranty add nothing; the ranking comes from the other three.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Clebay 6-Grit Roll | 9.7 | 32 | 21 | 21 | n/a | 0 |
| Benchmark 150 ft Roll | 9.6 | 29 | 22 | 21 | n/a | 0 |
| Bitbbro 6-Piece Roll | 9.6 | 30 | 21 | 20 | n/a | 0 |
| Bates 5-Grit Roll | 9.6 | 29 | 21 | 20 | n/a | 0 |
| SCOTTCHEN Mesh Roll | 9.5 | 28 | 20 | 19 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




