Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Welding Vise Under 50: 5 Picks

Best welding vise under 50: 5 bench vises and welding clamps compared by jaw size, clamping force and mounting. From the listings.

Best Welding Vise Under 50: 5 Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ZHRMJZG 4.5″ Bench ViseBest overallZHRMJZG 4.5″ Bench Vise9.6/10View on Amazon
  2. 2WORKPRO 4.5″ Bench ViseMost forceWORKPRO 4.5″ Bench Vise9.5/10View on Amazon
  3. 3IRWIN VISE-GRIP 11″ Welding PliersBest clampsIRWIN VISE-GRIP 11″ Welding Pliers9.5/10View on Amazon

The best welding vise under 50 comes down to what it holds: a bench vise for the workbench, or locking welding clamps for tacking parts in place. Both live under the same budget; the vise holds the work, the clamps hold the joint. We compared 5 vises and clamps by jaw size, clamping force, materials and mounting, using only their published listings. This is a research-based review; we have not used the tools ourselves.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.

Quick picks

  • Best overall ZHRMJZG 4.5″ Bench Vise: Forged steel vise with 2-in-1 mounting and 3-year replacement. Check price on Amazon
  • Most force WORKPRO 4.5″ Bench Vise: 2204 pounds of clamping force in gray iron. Check price on Amazon
  • Best clamps IRWIN VISE-GRIP 11″ Welding Pliers: 11-inch fast-release welding pliers with swivel pads. Check price on Amazon

The machines

Bench Vise, 4-1/2" Table Vise For Workbench,2-in-1

Bench Vise, 4-1/2" Table Vise For Workbench,2-in-1

ZHRMJZG9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4.5-inch forged steel bench vise with 270-degree swivel base, 2-in-1 bolt or clamp mounting and 3-year replacement promise.

Pros

  • Forged steel construction
  • 2-in-1 bolt or clamp mounting
  • 3-year replacement promise
  • 270-degree swivel base

Cons

  • 3.3-inch jaw opening, smaller than the WORKPRO
  • 13.3 pounds to move
  • No clamping force figure stated
  • Soft jaws are an add-on
WORKPRO Bench Vise, 4-1/2" Vice for Workbench

WORKPRO Bench Vise, 4-1/2" Vice for Workbench

WORKPRO9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4.5-inch gray iron bench vise with 240-degree swivel base, multi-jaw design and 2204 pounds of clamping force.

Pros

  • 2204 pounds of clamping force
  • Multi-jaw holds flat stock and pipe
  • 240-degree swivel locking base
  • Large anvil area

Cons

  • Bolts down only, no clamp option
  • 4.8 kg to move
  • No warranty term stated
  • Gray iron, not forged steel
IRWIN VISE-GRIP Welding Pliers, Fast Release

IRWIN VISE-GRIP Welding Pliers, Fast Release

IRWIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

11-inch VISE-GRIP fast-release welding pliers, C-clamp with swivel pads for clamping workpieces for welding.

Pros

  • 11-inch reach for large work
  • Fast-release triggerless opening
  • C-clamp with swivel pads
  • Reduced hand span for control

Cons

  • No warranty term stated
  • Pliers, not a bench vise
  • 2 pounds to carry
  • No clamping force figure
IRWIN VISE-GRIP Locking Pliers, Welding Clamp

IRWIN VISE-GRIP Locking Pliers, Welding Clamp

IRWIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

9-inch VISE-GRIP locking welding clamp with U-shaped jaw, guarded trigger release and alloy steel construction.

Pros

  • U-shaped jaw for visibility
  • Guarded trigger release
  • Heat-treated alloy steel
  • Hex key pressure adjustment

Cons

  • Warranty term not stated
  • Pliers, not a bench vise
  • 9-inch reach only
  • 0.47 kg, light for heavy tacks
Table Vise 3.2 Inch - Universal Bench Vise

Table Vise 3.2 Inch - Universal Bench Vise

VonLux9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

3.2-inch cast steel clamp-on table vise with 360-degree swivel base for light metalworking and drilling.

Pros

  • Clamp-on, no drilling
  • 360-degree swivel base
  • Cast steel construction
  • 1.82 kg, portable

Cons

  • 3.2-inch jaws, smallest here
  • No warranty term stated
  • Light work only
  • 2.95-inch max opening

Other welders and gear to compare

Spec sheet comparison

Tool Type Jaw size Key spec
ZHRMJZG 4.5in Bench vise 4.5 in 3-year replacement
WORKPRO 4.5in Bench vise 4.5 in 2204 lb force
IRWIN 11in Welding pliers 11 in Fast release
IRWIN 9in Welding clamp 9 in U-jaw
VonLux 3.2in Table vise 3.15 in Clamp-on

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026.

How to choose the best welding vise under 50

Bench vise or welding clamps

The first choice is the tool type. Bench vises (WORKPRO 4.5-inch, ZHRMJZG 4.5-inch, VonLux 3.2-inch) bolt or clamp to the bench and hold the workpiece for grinding, drilling and fitting. Locking welding clamps (IRWIN 9-inch U-jaw, IRWIN 11-inch C-clamp with swivel pads) hold 2 pieces together for tacking. Most welding shops want both: the vise for the bench, the clamps for the joint.

Jaw size and clamping force

Jaw size decides what fits. The WORKPRO lists a 4.5-inch jaw width with 4-1/4 inch opening and 2204 pounds of clamping force in gray iron; the ZHRMJZG lists a 4.5-inch jaw width with 3.3-inch opening in forged steel at 13.3 pounds; the VonLux lists 3.15-inch jaws with 2.95-inch opening in cast steel at 1.82 kg. The IRWIN clamps are 9 and 11 inches long for reaching around work. Bigger jaws and more force suit heavier fabrication; the clamp-on VonLux suits light work and portability.

Swivel and mounting

Swivel bases angle the work: 240 degrees on the WORKPRO, 270 degrees on the ZHRMJZG, 360 degrees on the VonLux. Mounting differs too: the WORKPRO bolts down, the ZHRMJZG bolts or clamps with its 2-in-1 base for 2.3-inch tables, and the VonLux clamps on with no drilling. Pick the mounting that matches the bench.

Anvil and throat depth

The WORKPRO is the only listing that states anvil and throat figures: a large anvil area with a throat depth of 2-11/32 inches (5.9 cm), a jaw opening of 4-1/4 inches (11.1 cm) and a jaw width of 4.5 inches (11.1 cm). The throat depth decides how far into the vise a workpiece can sit before the slide or screw gets in the way; the jaw opening decides the thickest stock it swallows. None of the other four listings state throat depth or an anvil, so if hammering or forming on the vise matters, the WORKPRO is the only one with stated numbers. The ZHRMJZG lists its own dimensions at 9 by 4.5 by 8.6 inches, which describes the box rather than the working envelope.

Materials: what each vise is made of

The listings name four different metals. The WORKPRO body is gray iron, with a tensile strength figure of 2204 pounds in the spec table. The ZHRMJZG is high-strength forged steel with a surface coating the listing says prevents rusting. The VonLux is cast steel, which the listing calls high strength and hardness and not easy to break. Both IRWIN clamps are alloy steel, with the 9-inch 25ZR calling it high-grade heat-treated alloy steel. The listings do not rank these materials against each other, so take the construction as stated: forged and alloy steels where the listings emphasize strength, gray iron on the WORKPRO where the listing emphasizes the 2204-pound tensile figure.

Holding pipe and round stock

Welding rarely means flat bar only. The WORKPRO lists a multi-jaw design that holds both flat materials and pipes or tubes without slipping or scratching their surfaces, which is the pipe claim in this group. The IRWIN 25ZR takes a different approach with a U-shaped jaw that the listing says gives enhanced visibility and more working space, suited to wrapping around round or awkward shapes. The other three listings make no pipe or round-stock claim: the ZHRMJZG lists soft jaws for multiple purposes, the VonLux lists rubber pads to avoid damaging objects, and the 11-inch IRWIN lists swivel pads on its C-clamp jaws. If the work is mostly tube and pipe, the WORKPRO’s stated multi-jaw is the one to weigh.

Screws, pads and release mechanisms

The small details decide daily use. The IRWIN 25ZR lists a guarded trigger release that reduces accidental release and a hex key hole thumb screw for more precise pressure adjustment. The 11-inch IRWIN lists a 20% reduced hand span for control, a hex key adjusting screw that draws materials together, a tactile grip zone the listing says suits high-temperature applications, and a one-handed triggerless release the listing calls 2x easier to open. The VonLux includes 4 protective rubber pads that keep the table from being pinched and avoid damaging objects. The ZHRMJZG lists multifunctional soft jaws. The WORKPRO lists none of these small parts; its adjustments are the vise screw and the 240-degree swivel lock.

Weight and portability

Weights split the group in two. The bench vises are the heavy ones: the WORKPRO at 4.8 kg, the ZHRMJZG at 13 pounds in the bullets and 13.3 pounds in the spec table, and the VonLux at 1.82 kg. The locking clamps travel light: the 9-inch IRWIN at 0.47 kg and the 11-inch at 2 pounds. A 13-pound vise stays where it is bolted; a sub-pound clamp rides in a tool bag to the job. The VonLux sits between the two worlds at under 2 kg with its clamp-on base, which is the portability argument in its listing.

Warranty and listing fine print

Warranty terms are thin here. The ZHRMJZG promises replacement within 3 years for malfunctions in normal use, the strongest stated term in the group. The 9-inch IRWIN names a manufacturer warranty with no stated term. The WORKPRO, VonLux and 11-inch IRWIN listings state no warranty term at all. A few more fine-print notes: the WORKPRO lists model W033010AC in blue and names HANZGHOU GREATSTAR INDUSTRIAL as the manufacturer; the VonLux model is AOBADEA812; the 11-inch IRWIN lists its material as Blend and color as Multi, which reads like a catalog row rather than a description of the tool. Where the spec table and bullets disagree, the title and bullets win.

Listing gaps to check before buying

Only the WORKPRO states a clamping force figure, 2204 pounds; the ZHRMJZG, VonLux and both IRWIN listings state none, so their holding power is unrated on paper. Only the WORKPRO states throat depth and an anvil area. On warranties, the ZHRMJZG promises replacement within 3 years and the 9-inch IRWIN names a manufacturer warranty with no term; the other three state nothing. A few rows deserve skepticism: the 9-inch IRWIN spec table has a Specific Uses row that just repeats the field name, and the 11-inch lists item dimensions of 14.5 by 1 by 0.04 inches, which reads as packaging rather than the tool. The VonLux states a maximum clamping thickness of 2.76 inches for its clamp-on base, and the ZHRMJZG fits tables to 2.3 inches thick. Check the numbers that matter for the job, and treat unstated specs as unknown rather than as fine.

FAQ for welders

What is the difference between a vise and a welding clamp?

A vise mounts to the bench and holds the workpiece; a locking welding clamp holds two pieces together for tacking. The listings here include both types.

How much clamping force do I need?

The WORKPRO lists 2204 pounds of clamping force. For light tacking, the IRWIN locking clamps hold with hand-adjusted pressure via the thumb screw.

Will these fit my bench?

The ZHRMJZG clamps to tables to 2.3 inches thick; the VonLux clamps to various workbench thicknesses. The WORKPRO bolts down with screws.

Is there a warranty?

The ZHRMJZG listing promises replacement within 3 years for malfunctions in normal use; the IRWIN 9-inch listing names a manufacturer warranty without a stated term.

Which vise holds pipe?

The WORKPRO: its multi-jaw design is listed to hold flat materials and pipes or tubes without slipping or scratching. The IRWIN 25ZR’s U-shaped jaw suits round shapes, but the listing makes no pipe claim.

Scoring, line by line

The Weld Score weighs performance (holding power and jaw capacity), build, value, safety and warranty. Materials and clamping force carry the build score. The ZHRMJZG listing offers a 3-year replacement promise; the IRWIN 9-inch listing names a manufacturer warranty without a term.

More welding guides

For more shop tools, browse our metal fab tools guides.

More buying guides

Welding Tables and Carts ·

Best Welding Vise for Home Shop (2026)

Five bench vises for a home welding shop, compared on jaw width and opening, clamping force, swivel, anvils and the warranty each listing states.

Welding Tables and Carts ·

Best Welding Vise for Mechanics (2026)

Five bench and pipe vises compared by jaw size, iron strength, swivel base and warranty, for mechanics and shop repair work.