Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Welding Vise Under $100 (2026): 4 Compared

Four bench vises under $100 compared by stated clamping force, jaw size, swivel and mounting, ranked by score, with a buying guide for the home shop.

Best Welding Vise Under $100 (2026): 4 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1PONY 4-Inch Bench ViseStrongest VisePONY 4-Inch Bench Vise9.7/10View on Amazon
  2. 2WORKPRO Dual Jaws Table ViseBest Dual JawsWORKPRO Dual Jaws Table Vise9.6/10View on Amazon
  3. 3MAXMAN Clamp Bench ViseTilting ViseMAXMAN Clamp Bench Vise9.6/10View on Amazon
  4. 4ZEONHAK 3-Inch Bench Vise 2-PackBest PairZEONHAK 3-Inch Bench Vise 2-Pack9.6/10View on Amazon

A vise is the third hand every welding bench needs: it holds the workpiece still while you tack, grind and fit. Best welding vise under 100 means a bench vise with enough clamping force for steel, a swivel base for angles, and jaws that grip without slipping. This guide compares four bench vises by stated clamping force, jaw size, construction and mounting, ranked by their scores.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Strongest Vise PONY 4-Inch Bench Vise: 4400 lb clamping force, 4-inch jaws, replaceable pipe jaws and anvil. Check price on Amazon
  • Best Dual Jaws WORKPRO Dual Jaws Table Vise: 2.5-inch serrated plus 1.5-inch smooth jaws, 660 lb force, 360-degree swivel. Check price on Amazon
  • Tilting Vise MAXMAN Clamp Bench Vise: 360-degree swivel plus 45-degree tilt and a full installation kit. Check price on Amazon
  • Best Pair ZEONHAK 3-Inch Bench Vise 2-Pack: Two 3-inch aluminum vises with 360-degree ball swivel and rubber jaw covers. Check price on Amazon

The machines

PONY 4 Inch Heavy Duty Bench Vise

PONY 4 Inch Heavy Duty Bench Vise

PONY9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

4-inch bench vise with 4400 lb clamping force, 360-degree base, pipe jaws and anvil.

Pros

  • 4400 lb clamping force, the highest stated here
  • 4-inch jaw width and opening
  • Replaceable pipe jaws plus anvil surface
  • Dustproof enclosed rear with mounting bolts included

Cons

  • No warranty stated
  • 10.15 x 5.25 x 6 inches needs bench space
  • No weight stated in the listing
  • Black and orange finish shows dust
WORKPRO Dual Jaws Table Vise 2.5" & 1.5"

WORKPRO Dual Jaws Table Vise 2.5" & 1.5"

WORKPRO9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Dual-jaw table vise with 2.5-inch serrated and 1.5-inch smooth jaws, 660 lb force, 360-degree swivel.

Pros

  • Dual jaws: 2.5-inch serrated plus 1.5-inch smooth
  • 660 lb (300 kg) clamping force stated
  • 360-degree swivel base and head
  • 7.7 lb with clamp-on or bolt-down mounting

Cons

  • No warranty stated
  • 1/4-inch mounting bolts not included
  • Small 8.7 x 6.9 x 3.5 inch footprint limits big work
  • No tilt stated; swivel only
MAXMAN Clamp Bench Vise, 360° Cast Steel Swivel

MAXMAN Clamp Bench Vise, 360° Cast Steel Swivel

MAXMAN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Cast steel bench vise with 360-degree swivel, 45-degree tilt and a full installation kit.

Pros

  • 360-degree swivel plus 45-degree tilt
  • 3.2-inch jaw opening with ~3-inch jaws
  • Full installation kit with rubber bench pads
  • Cast steel with chrome-plated spindle

Cons

  • No warranty stated
  • 1.74 kg is light for heavy hammering
  • Listing warns against added leverage
  • Orange finish is loud
2 PCS 3 Inches Bench Vise

2 PCS 3 Inches Bench Vise

ZEONHAK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Pair of 3-inch aluminum bench vises with 360-degree ball swivel, 45-degree tilt and rubber jaw covers.

Pros

  • 2-pack: two vises in one set
  • 360-degree ball swivel with 45-degree tilt
  • Soft rubber jaw covers prevent marring
  • No-drill clamp fits benches under 2 inches thick

Cons

  • No warranty stated
  • No clamping force stated
  • Aluminum is softer than iron or steel
  • 1.72 kg for the pair is light

Other welders and gear to compare

Spec sheet comparison

Model Verdict Jaw / Type Clamping force Swivel Warranty
PONY 4-Inch Strongest 4″ jaws 4400 lb 360-degree base Not stated
WORKPRO Dual Jaws Best dual jaws 2.5″ + 1.5″ jaws 660 lb 360-degree Not stated
MAXMAN Clamp Vise Tilting 3″ jaws, 3.2″ opening 1500 lb tensile 360 + 45-degree tilt Not stated
ZEONHAK 3-Inch 2-Pack Best pair 3″ aluminum jaws Not stated 360-degree ball Not stated

All specs here repeat what the maker rates and the listing prints, copied down 20 October 2026. No listing states a warranty term or a safety certification, so warranty and safety scores are zero across the board.

What the listings tell you

The four are ductile iron (PONY, WORKPRO), cast steel (MAXMAN) and aluminum alloy (ZEONHAK); none is plastic. All four swivel, and two tilt as well: the MAXMAN and the ZEONHAK, both at 45 degrees. Stated clamping force runs from 660 pounds (WORKPRO) to 4400 pounds (PONY), with the MAXMAN stating a 1500-pound tensile figure instead. No listing states a warranty term. Two list an anvil surface: the PONY with a built-in anvil and the WORKPRO, whose listing title includes an anvil. Mounting varies: the PONY bolts down with included bolts, the MAXMAN ships a full installation kit, the WORKPRO clamps on or bolts down, and the ZEONHAK clamps on with no drilling.

Buying guide: best welding vise under 100, what matters

Clamping force

Force is the headline number. The PONY states 4400 pounds of clamping force, the WORKPRO states 660 pounds (300 kg), and the MAXMAN states a 1500-pound tensile strength. The ZEONHAK states no force figure, so compare it on design rather than numbers. More force suits thicker steel and heavier hammering on the anvil.

Jaw size and type

Match the jaws to your work. The PONY has 4-inch jaws with a 4-inch opening plus replaceable pipe jaws for round stock. The WORKPRO pairs 2.5-inch serrated jaws for metal with 1.5-inch smooth jaws for finished parts. The MAXMAN opens to 3.2 inches with roughly 3-inch-wide jaws. The ZEONHAK is a 3-inch vise with soft rubber jaw covers that prevent marring.

Swivel and tilt

All four rotate. The PONY and WORKPRO each swivel 360 degrees. The MAXMAN and ZEONHAK add a 45-degree tilt to the 360-degree rotation for angled work. If you weld at odd angles, the tilting ball vises earn their keep.

Mounting

Decide how it attaches. The WORKPRO clamps on or bolts down to most workbenches. The PONY includes mounting bolts and nuts. The MAXMAN ships a full installation kit with rubber pads that protect the bench. The ZEONHAK clamps onto benches under 2 inches thick with no drilling. The welding vise vs welding clamp comparison covers when each type wins.

Construction

The WORKPRO uses ductile iron (QT400) with carbon steel jaws hardened to 52 to 58HRC. The PONY uses ductile iron with a stated 6000 PSI tensile strength and a dustproof enclosed rear. The MAXMAN is cast steel with a chrome-plated spindle. The ZEONHAK is aluminum alloy, lighter at 1.72 kg for the pair but softer than iron.

Anvil use

Two picks include an anvil surface for forging, hammering and shaping metal: the PONY with a built-in anvil and the WORKPRO, whose listing title includes an anvil. If you shape stock on the vise, the anvil matters; the 4400-pound PONY with ductile iron and a stated 6000 PSI tensile figure is built for that abuse. The MAXMAN and ZEONHAK state no anvil, so they suit holding and fitting rather than hammering.

Portability

The WORKPRO at 7.7 pounds and the ZEONHAK pair at 1.72 kg total are the portable picks, with clamp-on mounting that moves between benches. The PONY bolts down and the MAXMAN mounts with its installation kit, so both suit a fixed bench spot. If your welding moves between the garage and the driveway, weight and clamp-on mounting decide.

Dust and maintenance

Grinding dust kills vises. The PONY is the only pick with a stated dustproof enclosed rear that keeps debris out of the body, plus a round guide bar for smooth sliding and a replaceable U-shaped steel wear part. The others state no dust protection, so clear them out after grinding sessions and oil the screw periodically.

Value

The PONY delivers 4400 pounds of force with pipe jaws and an anvil. The WORKPRO gives two jaw types and 660 pounds in a 7.7-pound portable body. The MAXMAN adds 45-degree tilt with a full mounting kit. The ZEONHAK gives you two vises. Pick by force and mounting first.

Sizes and bench fit

Size decides whether the vise fits the bench you have. The PONY measures 10.15 x 5.25 x 6 inches with a 4-inch jaw width and opening. The WORKPRO measures 8.7 x 6.9 x 3.5 inches at 7.7 pounds, with clamp-on or bolt-down mounting. The MAXMAN reaches 12.5 inches in max height with a 3.2-inch jaw opening and roughly 3-inch jaws. The ZEONHAK clamps onto benches under 2 inches thick with no drilling, so check bench thickness before choosing a clamp-on vise.

What ships with each vise

Check the box before you buy, since mounting hardware differs. The PONY ships with all mounting bolts and nuts for setup. The MAXMAN ships a full installation kit with rubber bench pads, soft jaw covers and gaskets, with 10 holes for fixing positions. The WORKPRO ships as a single table vise, with 1/4-inch mounting bolts not included. The ZEONHAK ships as a 2-pack of vises, so one set covers two benches or two workstations.

Jaw covers and grip

Jaw surfaces decide whether the vise marks the workpiece. The WORKPRO pairs 2.5-inch serrated jaws for pipe, tube and metalwork with 1.5-inch smooth jaws for finished parts. The PONY uses replaceable pipe jaws for round stock plus a built-in anvil. The MAXMAN fits soft rubber gaskets on the jaws and rubber pads under the bench clamp. The ZEONHAK fits soft rubber jaw covers that are removable and protect items from scratching or marring.

Holding round stock

Round stock needs jaws shaped for curves, not flat faces. The PONY includes replaceable pipe jaws for holding round materials. The WORKPRO grips pipe and tube with its 2.5-inch serrated jaws. The MAXMAN uses soft rubber gaskets that keep pipes from sliding or scratching while fixed. The ZEONHAK covers its jaws with soft rubber that protects items from scratching or marring during clamping.

Tilt angles

Tilt matters when the weld sits at an angle to the bench. The MAXMAN head rotates 360 degrees and tilts up to 45 degrees, with an oblique side for angled fixing. The ZEONHAK swivel ball rotates 360 degrees and tilts 45 degrees freely, with the clamping angle adjusted by the grips. The PONY and WORKPRO list swivel only, with no tilt figure stated.

FAQ for welders

What is the strongest vise here?

The PONY, by stated clamping force: 4400 pounds, against 660 pounds for the WORKPRO and a 1500-pound tensile figure for the MAXMAN. The ZEONHAK states no force figure.

Which vise suits round pipe?

The PONY includes replaceable pipe jaws for round materials. The WORKPRO’s 2.5-inch serrated jaws also grip pipe and tube. Smooth or rubber-covered jaws suit finished parts you do not want to mar.

Do any of these have a warranty?

No. No listing here states a warranty term.

Can I mount these without drilling?

The ZEONHAK clamps onto benches under 2 inches thick with no drilling, and the WORKPRO offers a clamp-on option. The PONY bolts down with included bolts and nuts, and the MAXMAN ships a full installation kit with rubber pads to protect the bench.

What does 52 to 58HRC mean on the WORKPRO jaws?

It is the stated hardness of the carbon steel jaws: harder jaws resist denting and grip longer. The PONY counters with ductile iron at a stated 6000 PSI tensile strength. The figures are not directly comparable across listings, so treat them as build-quality signals.

Related: the best welding vise for home shop roundup.

Scoring, line by line

Each vise is scored on performance, build, value, safety and warranty, with the weights published on our How We Pick page. Clamping force and jaw design drive performance here; no listing states a warranty term, so warranty scores are zero across the board.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
PONY 4-Inch Bench Vise 9.7 34 21 20 n/a 0
WORKPRO Dual Jaws Table Vise 9.6 32 21 20 n/a 0
MAXMAN Clamp Bench Vise 9.6 30 20 20 n/a 0
ZEONHAK 3-Inch Bench Vise 2-Pack 9.6 28 20 21 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

More buying guides

Welding Tables and Carts ·

Best Welding Vise for Home Shop (2026)

Five bench vises for a home welding shop, compared on jaw width and opening, clamping force, swivel, anvils and the warranty each listing states.

Welding Tables and Carts ·

Best Welding Vise for Mechanics (2026)

Five bench and pipe vises compared by jaw size, iron strength, swivel base and warranty, for mechanics and shop repair work.