Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Vise vs Welding Clamp: Which One Should You Buy?

A 4.5 inch bench vise and a tripod chain vise face 10 inch and 18 inch locking clamp sets: what the listings state about opening, weight and warranty, and who should pick which side.

Welding Vise vs Welding Clamp: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Monster & Master Welding Pipe Plier ClampsMonster & Master Welding Pipe Plier Clamps9.5/10View on Amazon
  2. 2VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch JawVEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw9.5/10View on Amazon
  3. 3Hiceeden 3 Pcs 18 Inch Deep C Clamp with SwivelHiceeden 3 Pcs 18 Inch Deep C Clamp with Swivel9.5/10View on Amazon
  4. 4Mophorn 460-6 Tripod Pipe Chain Vise 1/8"-6"Mophorn 460-6 Tripod Pipe Chain Vise 1/8"-6"9.4/10View on Amazon

Verdict. Pick a welding vise when the work stays put: the VEVOR bench vise anchors flat stock and small pipe at the table, and the VEVOR tripod vise carries pipe work out to the job. Pick welding clamps when the work moves: the Monster & Master and Hiceeden locking sets hold tubes and plate together for tacking, with the M&M pair adding a stated anti-pinch release.

A vise and a clamp solve different holding problems, and this comparison keeps them separate. The welding vise vs welding clamp question comes down to whether your workpiece needs a fixed home or a portable grip. We put two vises and two clamp sets side by side on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The four picks

Monster & Master Welding Pipe Plier Clamps

Monster & Master Welding Pipe Plier Clamps

Monster & Master9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-piece set of 10 inch locking C-clamp pliers with V-pads for round or square tubes, in forged high carbon steel.

Pros

  • V-jaw design fits round and square tubes
  • Anti-pinch injury safety release, stated
  • Forged high carbon steel, sandblasted surface
  • Adjustable clamping pressure via thumbscrew

Cons

  • No warranty term stated
  • Weight not stated
  • Maximum tube sizes given as 1, 2 and 3 inches only
  • Customer service promise is not a written warranty
VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw

VEVOR Bench Vise, 4.5-inch Jaw Width 3.3-inch Jaw

VEVOR9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4.5 inch cast iron bench vise with a 3.3 inch jaw opening, 240 degree swivel base and an anvil, at a listed 10 pounds.

Pros

  • 4.5 in jaw width, 3.3 in opening, anvil included
  • 240 degree swivel locking base
  • Replaceable serrated carbon steel jaw plates
  • Bolts, nuts and manual included for bench mounting

Cons

  • No warranty term stated
  • No stated safety feature or standard
  • Pipe clamping limited to 0.6 to 1.8 in
Hiceeden 3 Pcs 18 Inch Deep C Clamp with Swivel

Hiceeden 3 Pcs 18 Inch Deep C Clamp with Swivel

Hiceeden9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece set of 18 inch deep locking C-clamps with swivel pads and about 6.7 inches of opening, in high carbon steel.

Pros

  • 3 clamps in the set
  • About 6.7 in maximum opening, the widest here
  • Swivel pads to protect work surfaces
  • Heat-treated high carbon steel construction

Cons

  • No warranty term stated
  • No stated safety feature or standard
  • Weight not stated
  • Value claims in the bullets we do not score
Mophorn 460-6 Tripod Pipe Chain Vise 1/8"-6"

Mophorn 460-6 Tripod Pipe Chain Vise 1/8"-6"

VEVOR9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A portable tripod chain vise for 1/8 to 6 inch pipe, with folding steel legs, a tool tray and rubber mounts, at a listed 49 pounds.

Pros

  • 1/8 to 6 in pipe capacity
  • Folding steel legs and a tool tray
  • Rubber mounts against sliding
  • Complete kit of stand and parts in the box

Cons

  • No warranty term stated
  • No stated safety feature or standard
  • 49 lb listed weight against lightweight bullets
  • Title names Mophorn while the brand is VEVOR

Other welders and gear to compare

Side by side: welding vise vs welding clamp

M&M Pipe Plier Clamps VEVOR Bench Vise Hiceeden 18in C Clamps VEVOR Tripod Vise
Side Welding clamp Welding vise Welding clamp Welding vise
Opening 1, 2, 3 in tube fit 3.3 in About 6.7 in 1/8 to 6 in pipe
Weight Not stated 10 lb Not stated 49 lb
Pieces 2 1 3 1

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026.

Holding power and opening

Openings are stated for three of the four: the VEVOR bench vise lists a 3.3 inch jaw opening, the Hiceeden set lists about 6.7 inches, and the VEVOR tripod vise lists 1/8 to 6 inch pipe capacity. The Monster & Master listing states tube fit for 1, 2 and 3 inch sizes instead of an opening figure. Opening alone does not crown a winner here: the formats differ too much for a straight comparison.

Where each one works

The bench vise bolts to a table and swivels 240 degrees, so the work comes to it. The tripod vise folds its steel legs and goes where the pipe is, with rubber mounts to stay put. The clamps are the portable end of the scale: the M&M pair and the Hiceeden trio grip work wherever you set them down, for welding and, per both listings, woodworking too.

Weight and build

The VEVOR bench vise example weighs 10 pounds and the tripod example 49 pounds, both stated in their tables. Neither clamp listing states a weight, so we say nothing about which side is heavier. Builds are stated as cast iron and carbon steel on the bench vise and aluminum alloy and steel on the tripod, with forged or heat-treated high carbon steel on the clamps.

What is in the box

The bench vise ships with bolts, nuts and a manual for mounting; the tripod ships as a complete kit of stand and parts. The M&M set is two clamps and the Hiceeden set is three. Count the pieces against the jobs you do: one vise holds one setup, while three clamps can hold a whole frame for tacking.

Warranty

None of the four listings states a warranty term, so all four score zero on warranty. The M&M listing offers customer service contact, which is not a written warranty.

Choose a welding vise if

You work at a bench or a repeatable station. The VEVOR bench vise holds flat stock, small pipe and tooling for grinding, tapping and cutting at the table, and the tripod vise gives pipe its own portable stand. A vise stays where you put it and frees both hands.

Choose welding clamps if

Your work moves around the shop or the job site. Locking clamps hold tubes and plate together for tacking, reposition in seconds, and travel in a toolbox. The M&M pair adds a stated anti-pinch release, and the Hiceeden trio gives you three clamps for the price of one setup.

FAQ for welders

Can a welding clamp replace a bench vise?

For tacking and light holding, often yes; for grinding, tapping and heavy filing, no. A bench vise bolts down and takes real force, while a locking clamp is a portable grip. Most home shops end up with both.

What size pipe does the tripod vise hold?

The VEVOR tripod listing states 1/8 to 6 inch pipe capacity. The bench vise lists pipe jaws for 0.6 to 1.8 inch pipe. The clamp listings state tube fit by size rather than pipe capacity.

Do any of these list a warranty?

No. None of the four listings states a warranty term, so warranty scores zero across the board. Keep the listing and the receipt in case you need the seller.

Are these clamps only for welding?

Both clamp listings name welding first and woodworking second, and the Hiceeden listing adds electrician maintenance. The vises are positioned for drilling, grinding, cutting and tapping as well as welding.

Why does the tripod vise title say Mophorn?

The title names Mophorn while the brand field on the listing says VEVOR. We score it under the VEVOR brand as listed. If the badge on the box matters to you, confirm with the seller before ordering.

Related: see our best welding vise for home shop.

Also see our best welding clamps for fabrication, types of welding clamps, welding magnets vs welding clamps, angle clamp vs C clamp, F-clamp vs C-clamp for welding, locking C-clamp vs screw clamp for welding, best welding vise for table.

Scoring, line by line

Each pick is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
M&M Pipe Plier Clamps 9.5 28 20 20 5 0
VEVOR Bench Vise 9.5 30 21 20 0 0
Hiceeden 18in C Clamps 9.5 29 20 21 0 0
VEVOR Tripod Vise 9.4 28 20 19 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

Vise and clamp safety. A vise must be bolted to a bench that can take the load, and a tripod stand needs level ground with its rubber mounts down. Locking clamps hold work for tacking, not for hammering or prying. Keep hands clear of jaws and handles, and wear eye protection and gloves at the bench.

More buying guides

Welding Tables and Carts ·

Best Welding Vise for Home Shop (2026)

Five bench vises for a home welding shop, compared on jaw width and opening, clamping force, swivel, anvils and the warranty each listing states.