Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Pipe Clamp Dimensions Guide

Pipe clamp dimensions come down to pipe size, pipe length and clamping face, and this guide explains each one with the clamps that cover the common sizes.

Pipe Clamp Dimensions Guide
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Bessey BPC-H34, 3/4-In. H Style Pipe ClampsBessey BPC-H34, 3/4-In. H Style Pipe Clamps9.7/10View on Amazon
  2. 2VEVOR Pipe Clamp for 2"-6" PipesVEVOR Pipe Clamp for 2"-6" Pipes9.6/10View on Amazon
  3. 3PONY the Original 2-Pack 50 Pipe Clamp FixturePONY the Original 2-Pack 50 Pipe Clamp Fixture9.6/10View on Amazon

A glue-up stalls when the clamp on the bench does not match the pipe under it. Pipe clamp dimensions are the set of sizes that decide that match: the pipe size the clamp fits, the length of pipe it rides on, and the size of the face that presses the work. Get those sizes right and the clamp holds the work steady; get a size wrong and the jaw slips or the pipe will not thread in. This guide walks through each size, then shows clamps that cover the common sizes.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Bessey BPC-H34, 3/4-In. H Style Pipe Clamps

Bessey BPC-H34, 3/4-In. H Style Pipe Clamps

BESSEY9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/4 inch H style pipe clamp with an Acme threaded spindle, malleable cast jaws, 4 soft jaw caps and a limited lifetime warranty.

Pros

  • Fits 3/4 inch black threaded iron pipe
  • H style foot steadies the clamp in two dimensions and keeps it from tipping
  • Acme threaded spindle for fast, strong clamping
  • 4 soft jaw caps included to protect the work, plus a limited lifetime warranty

Cons

  • Pipe is not included, so a length of 3/4 inch black pipe is still needed
  • No clamping force figure is stated
  • Single clamp only, so a glue-up that needs a clamp at each end takes two orders
  • The tall H style base takes bench space a flat clamp does not
VEVOR Pipe Clamp for 2"-6" Pipes

VEVOR Pipe Clamp for 2"-6" Pipes

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A forged carbon steel fit-up clamp for pipe from 2 to 6 inches, with wide grip plates, quick-acting screws and a two-hand handle.

Pros

  • Fits pipe from 2 to 6 inches, 5.1 to 15.2 cm, for pipe-to-pipe and flange fit-ups
  • Forged carbon steel body with a powder-coated finish
  • Wide grip plates and a quick-acting lever for fast adjustment
  • Ergonomic two-hand operating handle for comfortable use

Cons

  • No warranty term is stated
  • Fits pipe only from 2 to 6 inches, so smaller pipe needs a different clamp
  • At 8.0 lb it is the heaviest of the clamps with a stated weight
  • No clamping force figure is stated
PONY the Original 2-Pack 50 Pipe Clamp Fixture

PONY the Original 2-Pack 50 Pipe Clamp Fixture

PONY9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of iron cast pipe clamp fixtures for 3/4 inch black pipe, with a 1-3/4 inch clamping face and a multiple-disc clutch.

Pros

  • 2-pack covers two clamping points in one order
  • Fits 3/4 inch black pipes of any length
  • Big 1-3/4 inch clamping face suits a wide range of woodworking projects
  • Multiple-disc clutch and coil spring hold the jaw and stop slipping

Cons

  • No warranty term is stated
  • No clamping force figure is stated
  • No item weight is stated, so the heft is unknown before ordering
  • Pipe is not included, so black pipe is still needed

Pipe clamp dimensions, explained

Pipe clamp dimensions start with nominal pipe size. A woodworking pipe clamp built for 3/4 inch black pipe fits onto a length of 3/4 inch black pipe, and the pipe length sets how wide the clamp opens. A fit-up clamp built for pipe from 2 to 6 inches, 5.1 to 15.2 cm, works across that whole range instead of one size. The second size that matters is the clamping face: the PONY fixture (on Amazon) lists a 1-3/4 inch face, and the BESSEY lists large clamping surfaces on malleable cast jaws. Face size decides how much of the work the clamp presses at once, so a wide face suits wide boards and a narrow face suits small parts.

How to measure pipe for a clamp

Start with the pipe size the clamp lists, then measure the pipe, not the clamp. Black pipe is sold by nominal size, so a clamp listed for 3/4 inch pipe takes 3/4 inch black pipe, and a clamp listed for pipe from 2 to 6 inches takes pipe inside that range. Next, pick the pipe length for the span: the BESSEY and PONY clamps slide along the pipe, so a longer pipe opens the clamp wider and a shorter pipe keeps the setup compact. Last, check the face against the work: a 1-3/4 inch face covers more of the joint than a narrow face, and the BESSEY’s soft jaw caps keep its face from marking the work.

Pipe clamps that fit the sizes above

The sizes above decide which clamp to reach for: a 3/4 inch black pipe job takes a woodworking pipe clamp, and a pipe-to-pipe fit-up from 2 to 6 inches takes the fit-up clamp below. The clamps below cover each of those jobs.

Side by side

Pick Pipe size Material Item weight Gear Score
BESSEY BPC-H34 3/4 in black pipe Malleable cast jaws 1.32 lb 9.7/10
VEVOR Ultra Clamp 2 to 6 in pipe Forged carbon steel 8.0 lb 9.6/10
PONY 50 Pipe Clamp Fixture 3/4 in black pipe Iron cast Not stated 9.6/10

Pipe size is the main filter: the BESSEY and PONY clamps take 3/4 inch black pipe, while the VEVOR clamp takes pipe from 2 to 6 inches. The BESSEY carries the only stated warranty here, a limited lifetime warranty, and the PONY is the only 2-pack, which suits work that needs two clamping points at once.

FAQ for welders

What pipe size does a 3/4 inch pipe clamp fit?

A clamp listed for 3/4 inch pipe fits 3/4 inch black pipe. The BESSEY BPC-H34 (on Amazon) screws onto one end of black threaded iron pipe, and the PONY fixture slides onto 3/4 inch black pipe of any length. Match the clamp to the pipe size before ordering.

How long should the pipe be for a pipe clamp?

Long enough to span the work with room for the jaws to close. The BESSEY and PONY clamps work with a variety of pipe lengths, and the sliding jaw moves along the pipe to the spot the work needs. A pipe that is too short will not reach across the joint, so measure the span first.

What does the clamping face do on a pipe clamp?

The face is the surface that presses the work, and a wider face spreads the clamping force over more of the joint. The PONY fixture lists a 1-3/4 inch clamping face, and the BESSEY lists large clamping surfaces on malleable cast jaws, plus 4 soft jaw caps that protect the work from marks.

Can one clamp fit pipe from 2 to 6 inches?

Yes, the VEVOR Ultra Clamp lists pipe from 2 to 6 inches, 5.1 to 15.2 cm, for pipe-to-pipe, pipe-to-fitting, pipe-to-flange and pipe-to-tee fit-ups. It uses wide grip plates and quick-acting screws, and it weighs 8.0 lb. A clamp built for 3/4 inch pipe will not fit that range.

What is the H style base on a pipe clamp?

It is the foot assembly under the BESSEY BPC-H34 that steadies the clamp in two dimensions and keeps it from tipping over. The tall base also gives finger clearance from the work surface, and the crank handle clears the surface when the jaw opens and closes.

Related: best high strength pipe clamps, best pipe clamp 4 inch, parallel clamps vs pipe clamps, and the metal fab tools hub.

More buying guides