Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best U Type Pipe Clamp (2026): 4 Picks Compared

Four U-type pipe clamps for shop, exhaust and plumbing work, compared on stated fit, material, mounting style and pack size.

Best U Type Pipe Clamp (2026): 4 Picks Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1RGFXA 3/4 Inch 30-PackMost ClampsRGFXA 3/4 Inch 30-Pack9.6/10View on Amazon
  2. 2uxcell Muffler U-Bolt 25 mm 2-PackTop U-Bolt Pickuxcell Muffler U-Bolt 25 mm 2-Pack9.5/10View on Amazon
  3. 3Jersvimc 1 1/4 Inch 16-PackSmall Pipe PickJersvimc 1 1/4 Inch 16-Pack9.5/10View on Amazon

A pipe that shifts in a fixture is a pipe that welds out of square. Holding the pipe where the fit-up put it is the whole job, whether the clamp screws to a bench or wraps the pipe with a saddle. This roundup compares the best u type pipe clamp options from what 4 listings state, from U-shaped two-hole straps that screw to a surface to saddle-style U-bolts that tighten through a flange. Each pick is scored on stated fit, material, mounting and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Most Clamps RGFXA 3/4 Inch 30-Pack: 30 stainless clamps plus 20 screws, with stated dimensions for 1/2 inch NPS pipe. Check price on Amazon
  • Top U-Bolt Pick uxcell Muffler U-Bolt 25 mm 2-Pack: Stated thread, rod and saddle dimensions for 25 mm exhaust pipe, zinc-plated for corrosion and heat resistance. Check price on Amazon
  • Small Pipe Pick Jersvimc 1 1/4 Inch 16-Pack: Stated 1 1/4 inch fit with hole spacing and overall length, 16 stainless straps. Check price on Amazon

The machines

30PCS 3/4 inch Stainless Steel Conduit Clamps,2

30PCS 3/4 inch Stainless Steel Conduit Clamps,2

RGFXA9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 30-pack of stainless U-straps sized for 1/2 inch NPS pipe, with 20 screws in the box and a reinforced rib design.

Pros

  • 30 clamps plus 20 M4x30mm screws, the most complete box here
  • States the fit plainly: 1/2 inch NPS pipe, 0.84 inch actual OD
  • Reinforced rib and wider structure, smooth burr-free edges per the listing
  • Stainless steel stated for long-term indoor or outdoor use

Cons

  • No warranty or return term is stated
  • Only one size: 3/4 inch nominal, for 1/2 inch NPS pipe
  • 20 screws are included for 30 clamps
  • No U-bolt or saddle option for exhaust joints
16Pcs 1 1/4 Inch Stainless Steel Conduit Clamps

16Pcs 1 1/4 Inch Stainless Steel Conduit Clamps

Jersvimc9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-pack of stainless 1 1/4 inch U-straps with stated hole spacing and overall length for pipe fixing on wood, masonry and metal.

Pros

  • States full dimensions: 1 1/4 inch fit, 2.7 inch hole spacing, 3 inch length
  • Stainless steel with stated corrosion and rust prevention
  • Lists oil, water and gas media in hydraulic systems among uses
  • 16 clamps, a solid count for a run of pipe

Cons

  • No warranty term is stated
  • Only the 1 1/4 inch size; nothing for 2 inch pipe
  • Screws are not included
  • No strap thickness figure is stated
uxcell Muffler U-Bolt Clamps for 25mm(1")

uxcell Muffler U-Bolt Clamps for 25mm(1")

uxcell9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of saddle-style U-bolt clamps for 25 mm exhaust pipe, with stated thread, rod and saddle dimensions in zinc-plated carbon steel.

Pros

  • Full U-bolt dimensions: M8 thread, 7 mm rod, 55 x 15 mm saddle
  • Ships as a U-bolt, saddle flange and two nuts per clamp
  • Zinc-plated coating with stated corrosion and heat resistance
  • Aimed at exhaust work: muffler inlet and outlet, elbow joints

Cons

  • No warranty term is stated
  • Only fits 25 mm / 0.98 inch OD pipe
  • Carbon steel, not stainless
  • 2-pack only; bigger exhaust jobs need more boxes
2" Heavy Duty U Bolt Clamps Saddle Type

2" Heavy Duty U Bolt Clamps Saddle Type

LCGP9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of stainless saddle U-bolt clamps for 2 inch exhaust pipe, installed with bolts and no welding.

Pros

  • Stainless steel with stated corrosion resistance
  • Saddle type for 2 inch pipe, 50 to 56 mm inner diameter
  • No welding required, per the listing
  • Aimed at muffler and exhaust sealing work

Cons

  • No warranty term is stated
  • Fewer stated dimensions than the other U-bolt pick: no thread or rod size
  • Only 2 inch; nothing for smaller exhaust pipe
  • 2-pack only

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Stated fit Material Pack Warranty
RGFXA 3/4 Inch 30-Pack 9.6/10 1/2 in NPS pipe (0.84 in OD) Stainless steel 30 clamps, 20 screws None stated
Jersvimc 1 1/4 Inch 16-Pack 9.5/10 1 1/4 in / 32 mm Stainless steel 16 clamps None stated
uxcell Muffler U-Bolt 25 mm 2-Pack 9.5/10 25 mm / 0.98 in OD Zinc-plated carbon steel 2 clamps None stated
LCGP 2 Inch U-Bolt 2-Pack 9.5/10 2 in (50-56 mm) Stainless steel 2 clamps None stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 23 October 2026.

How to choose the best u type pipe clamp

Match the clamp to the stated pipe size

Start with the outside diameter of the pipe, then match it to the stated fit. The picks here state fits from 25 mm / 0.98 inch on the small exhaust clamp to 2 inch on 1 of the picks, with a 1 1/4 inch strap and a 1/2 inch NPS pipe fit in between. The RGFXA listing shows why the pipe size matters more than the clamp nominal size: its 3/4 inch clamp fits 1/2 inch NPS pipe with an actual OD of 0.84 inch. Measure the pipe before ordering.

Strap clamp or U-bolt clamp

Two-hole straps screw to a surface and hold the pipe against it; the 2 strap picks here list wood, masonry, metal and plastic as mounting surfaces. U-bolts wrap the pipe and tighten through a saddle flange with nuts, which suits exhaust and muffler joints. The LCGP listing states no welding is required, and the uxcell listing ships each clamp as a U-bolt, saddle flange and two nuts.

Material and where the clamp lives

3 picks state stainless steel with rust and corrosion resistance, and the RGFXA listing states suitability for long-term indoor or outdoor use. The uxcell pick is the outlier: carbon steel with a zinc-plated coating, which the maker states gives corrosion and heat resistance for exhaust work. Match the material to the job; exhaust and outdoor runs punish bare steel.

Pack size and what comes in the box

Strap boxes hold 16 or 30 clamps, and both U-bolt picks come as 2-packs. The RGFXA box is the only box that includes screws: 20 M4x30mm screws for its 30 clamps.

Warranty and returns

No listing here states an after-sales term, so no pick scores on warranty. The RGFXA box holds 30 clamps and the Jersvimc box holds 16, and the U-bolt picks come as 2-packs, but none of the listings states a warranty or return term.

Before You Strike an Arc

  • Measure the pipe outside diameter and match it to the stated fit before ordering; the clamp nominal size and the pipe size are not always the same.
  • Dry-fit every strap and saddle on the pipe before driving screws or tightening nuts.
  • Check that strap mounting holes land on solid material, not thin sheet, before fastening.
  • On U-bolt clamps, run the nuts down by hand first so the saddle seats square on the pipe.
  • Confirm the box includes screws; only the RGFXA box here states screws in the package, M4x30mm.

FAQ for welders

What is a U type pipe clamp?

It is a clamp shaped to wrap a pipe and hold it in place. The picks here show 2 styles: U-shaped two-hole straps that screw to a surface, and U-bolts with a saddle flange and nuts that wrap the pipe. Both fix pipe and conduit so it cannot shift, rattle or pull free.

Strap clamp or U-bolt clamp: which do I need?

Use a strap clamp to fix pipe or conduit to a wall, beam or other surface; the listings state wood, masonry, metal and plastic as mounting surfaces. Use a U-bolt clamp for exhaust and muffler joints, where the saddle wraps the pipe and the nuts pull the joint tight. The 2 U-bolt picks here are both aimed at exhaust work.

How do I size a U type pipe clamp?

Match the stated fit to the outside diameter of the pipe. The picks here state 25 mm / 0.98 inch, 1 1/4 inch, 1/2 inch NPS with an actual OD of 0.84 inch, and 2 inch. A clamp listed for 2 inch pipe will not close properly on a different diameter, so measure first and trust the listing stated fit.

Do these clamps need welding?

No. The strap clamps mount with screws through the two holes, and the U-bolt clamps tighten with nuts on the saddle flange. The LCGP listing states no welding is required, and installation is described as simple and quick across the listings.

Will a stainless clamp survive outdoors or on exhaust?

3 picks state stainless steel with rust and corrosion resistance, and one states suitability for long-term indoor or outdoor use. For exhaust heat specifically, the uxcell pick states a zinc-plated coating with corrosion and heat resistance aimed at muffler and exhaust joints. Match the coating to the exposure.

Related: parallel clamps vs pipe clamps, types of welding clamps, best pipe locking clamp, what is a pipe stand, best cut off wheel for exhaust pipe, best MIG wire for exhaust, welding tables and carts hub, and the metal fab tools hub.

Scoring, line by line

Each clamp is scored on performance, build, value, safety and warranty, with the weights explained on the How we pick page. Pipe clamps carry no electrical listing, so no pick earns safety points here; the ranking comes from the other criteria.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
RGFXA 3/4 Inch 30-Pack 9.6 29 21 22 n/a 0
Jersvimc 1 1/4 Inch 16-Pack 9.5 28 20 19 n/a 0
uxcell Muffler U-Bolt 25 mm 2-Pack 9.5 27 20 19 n/a 0
LCGP 2 Inch U-Bolt 2-Pack 9.5 26 19 19 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

More buying guides