Best Pipe Clamp 4 Inch (2026): 3 Picks for Pipe, Tube and Hose Work
Three stainless worm gear clamps for 4 inch pipe, tube and hose work, compared on fit range, pack size, drive type and material.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Widest Inch RangeGudui 10 Pack9.6/10View on Amazon - 2
Open Ring PickEesTeck 4 Pack9.5/10View on Amazon - 3
Compact PackISPINNER 2 Pack Black9.5/10View on Amazon
A pipe joint that slips loose loses its seal and leaves the run rattling, while a hose that works free of its fitting spills what it carries into the shop. Both joints need a clamp that grips all the way around and holds its shape under vibration, and the best pipe clamp 4 inch picks below compare three stainless clamps on fit range, pack size, drive type and material.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Widest Inch Range Gudui 10 Pack: A 3.5 to 4.5 inch fit range in a 10 pack, with the size marked on the band and a smooth edge for soft hoses. Check price on Amazon
- Open Ring Pick EesTeck 4 Pack: A 304 stainless steel worm drive clamp with an open inner and outer ring structure, listed for hoses, pipe, cable and tube work. Check price on Amazon
- Compact Pack ISPINNER 2 Pack Black: A 2 pack of black 304 stainless steel clamps for 78 to 102 mm hoses, for a single plumbing or automotive repair. Check price on Amazon
The machines

4 Inch Hose Clamp, 10 Pack Stainless Steel Hose
A 10 pack of SUS 304 stainless steel worm gear clamps for hoses from 3.5 to 4.5 inches, with the size marked on the band and a smooth edge for soft hoses.
Pros
- Fit range of 3.5 to 4.5 inches covers the 4 inch size with room on both sides
- Band, housing and screw are all SUS 304 stainless steel, per the listing
- Size marked on the band surface for easy identification
- Smooth edge helps avoid cutting into soft silicone, PVC or rubber hoses
Cons
- No warranty term is stated
- Brand lists many other sizes, so the buyer must check the pack is the 3.5 to 4.5 inch pack
- No tensile strength figure is stated
- No stated fit for PVC or steel pipe

4 Inch Adjustable 304 Stainless Steel Duct Clamps
A 4 pack of 304 stainless steel worm drive hose clamps with an open inner and outer ring structure, listed for hoses, pipe, cable and tube work.
Pros
- 304 stainless steel, stated as corrosion-resistant and long lasting
- Open inner and outer ring structure fastened with bolts, per the listing
- Screwdriver adjustment, with no special driver stated
- Listed for hoses, pipe, cable, tube, automotive, industrial and boat use
Cons
- No concrete warranty term is stated; only a satisfaction statement appears
- No tensile strength figure is stated

2pcs 4 Inch Stainless Steel Adjustable 78-102mm
A 2 pack of black 304 stainless steel worm gear hose clamps for hoses from 78 to 102 mm outside diameter, for plumbing, automotive and mechanical work.
Pros
- Band and screws are 304 stainless steel, per the listing
- Worm gear design adjusts across the stated 78 to 102 mm range
- Black finish stands apart from the silver clamps here
- Reusable and recyclable, per the listing
Cons
- Only 2 clamps in the pack, the smallest pack here
- No warranty term is stated
- No dimensions are stated
- Range is stated only in millimetres, so inch-size buyers must match 78-102 mm to their hose
Other welders and gear to compare
Water Pipe Repair Clamp for 4 inch PipeCheck price on Amazon
IRWIN Pipe ClampCheck price on Amazon
Bench Vise Heavy Duty 6-InchCheck price on Amazon
Exhaust Tacking Band Clamp-On SetCheck price on Amazon
RIDGID 40220 461 Straight Pipe Welding ViseCheck price on Amazon
Compare the best pipe clamp 4 inch picks
| Model | Gear Score | Fit range | Pack | Material | Drive | Warranty |
|---|---|---|---|---|---|---|
| Gudui 10 Pack | 9.6/10 | 3.5 to 4.5 in | 10 | SUS 304 stainless steel | Worm gear | Not stated |
| EesTeck 4 Pack | 9.5/10 | 91-114 mm | 4 | 304 stainless steel | Worm drive | Not stated |
| ISPINNER 2 Pack Black | 9.5/10 | 78-102 mm | 2 | 304 stainless steel | Worm gear | Not stated |
All specs here repeat what the maker rates and the listing prints, copied down 25 October 2026.
Buying guide: what matters in a 4 inch pipe clamp
Fit range
Fit range decides whether the clamp grips at all. Gudui spans 3.5 to 4.5 inches, EesTeck states 91-114 mm in its title, and the ISPINNER listing states its range only in millimetres, at 78 to 102 mm. Measure the hose outside diameter with the fitting in place, then match it to the stated range.
Drive type
Worm gear and worm drive clamps here tighten with a screw. The Gudui listing names a hose clamp driver for loosening the screw, and the EesTeck listing names a screwdriver for its worm drive clamp. The ISPINNER listing names no driver, so keep a screwdriver at hand for the worm gear screw.
Pack size
Packs here hold 2, 4 or 10 clamps. A 10 pack suits a run with several joints and spares on hand, while a 2 pack suits a single repair. Count the joints before ordering, since a short pack on a long run means another order.
Material
Every clamp here is stainless steel, and each listing names 304 stainless steel or SUS 304 stainless steel. The maker lists for stainless steel include corrosion resistance and rust resistance, which matter on plumbing, automotive and mechanical work indoors and outdoors. A smooth band edge, stated on the Gudui listing, helps keep a soft hose intact.
Seal and grip
A clamp earns its place by holding a seal without cutting the hose. The Gudui listing pairs dense slotted holes with high torque and a smooth drive, and a smooth edge that helps avoid cutting into soft silicone, PVC or rubber hoses. The EesTeck listing claims a seal across a variety of hose materials from an open inner and outer ring structure fastened with bolts. The ISPINNER listing claims a seal without damaging the hose from a worm gear design that adjusts across 78 to 102 mm.
Warranty terms
No listing here states a concrete warranty term. The EesTeck listing carries a satisfaction statement instead of a term, and the other listings state no warranty term.
Use as directed. Fit the clamp over the hose and the fitting, tighten evenly until the hose grips all the way around, and recheck the joint after the hose run is in use. A clamp that slips or cuts into a soft hose needs a different size, not more force, and a joint that stays loose needs measuring, not tightening past the stated range.
Before You Strike an Arc
- Measure the pipe or hose outside diameter with the fitting attached before ordering, since Gudui spans 3.5 to 4.5 inches, EesTeck states 91-114 mm, and the ISPINNER range is stated only as 78 to 102 mm.
- Check the size marked on the Gudui band against the hose size before tightening, so the pack size and the hose size match.
- Tighten the EesTeck clamp with a screwdriver, and use a hose clamp driver on the Gudui worm gear screw, as each listing states.
- Look over each clamp on arrival for a smooth band edge, so a rough edge does not cut into a soft hose.
FAQ for welders
What size hose does a 4 inch pipe clamp fit?
It depends on the listing. Gudui spans 3.5 to 4.5 inches, EesTeck states 91-114 mm in its title, and the ISPINNER listing states 78 to 102 mm. Measure the hose outside diameter with the fitting attached, then match that figure to the stated range.
What does the size marked on the band tell you?
The Gudui listing states the size is marked on the band surface for easy identification. Check that marked size against the hose size before tightening, since the brand lists many other sizes.
Do I need tools to fit a worm gear hose clamp?
The Gudui listing names a hose clamp driver for its worm gear screw, and the EesTeck listing names a screwdriver for its worm drive clamp. The ISPINNER listing names no driver, so keep a screwdriver at hand for the clamps that need one.
What pipe, tube and hose work do these clamps cover?
The listings name hoses, pipe, cable and tube work, plus plumbing, automotive, industrial and mechanical uses, and fuel lines among their uses. Every clamp here is stainless steel, and the listings state corrosion resistance, so the picks suit shop pipe, tube and hose joints rather than a single narrow use.
How many clamps come in a pack?
Packs here hold 2, 4 or 10 clamps. A 10 pack suits a run with several joints and spares on hand, while a 2 pack suits a single repair. Count the joints before ordering.
Related: best U type pipe clamp and welding tables and carts hub.
Scoring, line by line
Each clamp is scored on performance, build, value, safety listing and warranty. How we pick explains the weights. No clamp here states a safety listing of the kind the score looks for, and no clamp here states a concrete warranty term, so every clamp scores zero on those two criteria, and the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gudui 10 Pack | 9.6 | 29 | 21 | 21 | n/a | 0 |
| EesTeck 4 Pack | 9.5 | 27 | 20 | 20 | n/a | 0 |
| ISPINNER 2 Pack Black | 9.5 | 26 | 20 | 19 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.




