Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Bar Clamps 24 Inch (2026): 4 Compared

Four 24 inch bar clamps compared by force, throat, pack size and type, for the clamp that holds your work square on every single job.

Best Bar Clamps 24 Inch (2026): 4 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Jorgensen 24 in Bar Clamp SetBest OverallJorgensen 24 in Bar Clamp Set9.6/10View on Amazon
  2. 2MAXPOWER 24 in F ClampBest WeldingMAXPOWER 24 in F Clamp9.6/10View on Amazon
  3. 3WEN 24 in Steel Bar ClampBest 2-PackWEN 24 in Steel Bar Clamp9.6/10View on Amazon
  4. 4HANSOM 24 in Woodworking ClampBest 4-PackHANSOM 24 in Woodworking Clamp9.6/10View on Amazon

The best bar clamps 24 inch are the ones that hold the work square without slipping, because a clamp that racks ruins the weld and one that slips is a hazard: a 1500 lb parallel clamp suits cabinets, a forged F clamp suits metalworking, and a 4-pack suits a shop that clamps often. We compared four 24 inch bar clamps by force, throat, pack size and type, using only what each listing publishes.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

The machines

Jorgensen 24-inch Bar Clamps Set

Jorgensen 24-inch Bar Clamps Set

Jorgensen9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Jorgensen 24-inch bar clamps set, 2-pack Cabinet Master 90 degree parallel clamps with steel jaw, 1500 lbs clamping force stated.

Pros

  • 1500 lbs clamping force
  • 90 degree parallel clamps
  • Steel jaw stated
  • 2-pack stated

Cons

  • No stated warranty term
  • No stated certification
  • No throat stated
  • Parallel suits cabinets
MAXPOWER 24-inch F Clamp, 4-3/4" Throat

MAXPOWER 24-inch F Clamp, 4-3/4" Throat

MAXPOWER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A MAXPOWER 24-inch F clamp with 4-3/4 in throat, forged full steel bar clamp, 1200 lbs clamping pressure, for metalworking and welding use.

Pros

  • 1200 lbs clamping pressure
  • Forged full steel stated
  • 4-3/4 in throat
  • For metalworking and welding

Cons

  • No stated warranty term
  • No stated certification
  • No pack stated
  • F clamp suits fewer panels
WEN 24-Inch Heavy Duty Steel Bar Clamps

WEN 24-Inch Heavy Duty Steel Bar Clamps

WEN9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A WEN 24-inch heavy duty steel bar clamp and spreader set, 2.3-inch throat, two pack, 150 lb rating stated.

Pros

  • 24 in heavy duty steel
  • 2.3 in throat stated
  • Two pack stated
  • Clamps and spreaders

Cons

  • No stated warranty term
  • No stated certification
  • 150 lb is the lowest force
  • 2.3 in throat is shallow
Upgraded 4-Pack 24 Inch Woodworking Clamps,Bar

Upgraded 4-Pack 24 Inch Woodworking Clamps,Bar

HANSOM9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A HANSOM upgraded 4-pack of 24 inch woodworking clamps, heavy duty, 350 lbs, throat depth 3-1/3 in stated here.

Pros

  • 4-pack stated
  • 350 lbs stated
  • 3-1/3 in throat
  • 24 in heavy duty

Cons

  • No stated warranty term
  • No stated certification
  • Woodworking suits fewer welds
  • 350 lbs is mid-range

Other welders and gear to compare

Spec sheet comparison

Clamp Weld Score Force Throat Pack Type
Jorgensen 9.6/10 1500 lbs Not stated 2 Parallel
MAXPOWER 9.6/10 1200 lbs 4-3/4 in Not stated F clamp
WEN 9.6/10 150 lb 2.3 in 2 Bar/spreader
HANSOM 9.6/10 350 lbs 3-1/3 in 4 Woodworking

Clamp details as published on each listing, collected 22 October 2026.

Buying guide: the best bar clamps 24 inch

Check the clamping force

The Jorgensen states 1500 lbs, the MAXPOWER states 1200 lbs, the HANSOM states 350 lbs, and the WEN states 150 lb. More force suits metal; less suits wood. A clamp that cannot hold is a clamp you return.

Match the clamp to the work

The MAXPOWER is forged full steel for metalworking and welding, which suits a fab shop; pair it with a sturdy welding table for layout and tacking. The Jorgensen is a 90 degree parallel clamp, which suits cabinets. The HANSOM is woodworking. Pick the clamp that matches the material.

Check the throat

The MAXPOWER has a 4-3/4 in throat, the HANSOM has a 3-1/3 in throat, and the WEN has a 2.3 in throat. The Jorgensen states no throat in this roundup’s data. Deeper throat reaches further into the work.

Check the pack size

The HANSOM is a 4-pack, the Jorgensen and WEN are 2-packs, and the MAXPOWER states no pack in this roundup’s data. More clamps suit a glue-up; fewer suit a tack weld. Buy the pack that matches the job.

Check the bar

The MAXPOWER has a forged full steel bar, and the WEN is heavy duty steel. The listings here state no bar details for the others in this roundup’s data. A stiff bar resists flex under load.

Check the handle

A T-handle gives more torque, and a bar handle suits quick work. The listings here state no handle details in this roundup’s data, so check the product photos for the handle type before ordering. A handle that fits the hand is a handle you use.

Check the pads

Swivel pads protect the work surface, and fixed pads suit rough work. The listings here state no pad details in this roundup’s data, so read the reviews for marring comments before ordering. Pads that swivel seat flat on uneven stock.

Check the storage

Four clamps take space, and a rack keeps them handy. The listings here state no storage details in this roundup’s data, so hang the clamps on a wall rack when not in use. A clamp you can grab is a clamp you use.

Check the quick release

A quick release speeds repetitive clamping, and a screw handle suits fine adjustment. The listings here state no release details in this roundup’s data, so check the product photos for the release type before ordering. Fast release suits production work.

Check the rust resistance

A shop is humid, and a bare steel bar rusts. The listings here state no coating details in this roundup’s data, so wipe the bar with oil after use. A bar that stays clean slides smooth.

Check the reversible head

Three of the four listings describe a clamp that also spreads. The Jorgensen has a reversible head that converts from clamp to spreader, plus a clamp stand for quick positioning. The WEN is reversible too, doubling as a 24 in clamp and a 29.5 in spreader. The HANSOM lists a fixed end that is quickly replaced for clamping and spreading, with one-handed moving and release. If you assemble as often as you glue, a reversible head saves buying a separate spreader.

Check the bar material

Bar material is stated for all four, and it splits the group. The Jorgensen uses a high-carbon steel bar with reinforced steel jaws and protective orange plastic over the jaw. The MAXPOWER uses a drop-forged steel bar with a 7/8 x 27/64 in rail (22 x 10.6 mm) and a drop-forged, heat-treated sliding arm. The WEN lists a heavy-duty reinforced steel bar. The HANSOM is the outlier: a nylon body with a heat-treated bar the maker says does not bend in work. Match the bar to the force: the 1500 lb and 1200 lb clamps both run steel bars.

Check the spindle and pads

Only the MAXPOWER listing details the spindle and pads: a corrosion-resistant black oxide spindle that resists wear and rust, and a pivoting swivel pad that centers on the workpiece for a stable, non-marring grip on finished surfaces. The Jorgensen lists smooth maple handles for a firm grip with less hand fatigue, and the HANSOM lists an ergonomic handle that does not slip. The WEN lists an ergonomic squeeze trigger with a quick-release latch. For finished wood or painted metal, the swivel pad detail matters; for rough stock, any of the four will do.

Check the weight

Stated weights are 6.8 kg for the Jorgensen, 3.7 kg for the MAXPOWER and 2.77 kg for the WEN; the HANSOM states no weight. These are per the spec tables, and pack counts differ, so compare per clamp before judging. A heavier clamp usually means a stiffer bar, which matters at 1500 lbs of force; a lighter clamp is easier to position overhead or on a wall of glue-ups.

Check the throat against the work

Throat depth decides how far from the edge you can clamp. The MAXPOWER lists 4-3/4 in (120 mm), the HANSOM lists 3-1/3 in, and the WEN lists 2.3 in; the Jorgensen states no throat. The MAXPOWER also lists a stop end on the sliding arm that prevents it sliding off unexpectedly. Measure the widest stock you clamp from its edge, then pick a throat deeper than that number.

Check the pack size for the job

Pack size is stated for three of the four: the HANSOM is a 4-pack, the Jorgensen is a 2-pack, and the WEN is a two pack, while the MAXPOWER spec table names a 2-piece set. A 4-pack suits panel glue-ups where you need a clamp every several inches along the joint; a 2-pack suits tacking and small assemblies. Buying the 4-pack when you need two wastes money, and buying a 2-pack for a tabletop glue-up leaves joints open.

Check the opening and spreader reach

All four list a 24 in maximum opening, and the MAXPOWER notes it as 24 in (600 mm). The WEN adds a 29.5 in spreader reach when reversed, the longest reach stated here. The Jorgensen adds 90 degree parallel jaws that keep panels square under its 1500 lbs of force. Opening is only half the story: check the spreader reach too if you assemble frames or push joints apart.

Check the item dimensions

Two listings state item dimensions, and they help with storage planning. The Jorgensen measures 33.07 x 9.25 x 2.36 in as a 2-pack, and each WEN clamp measures 29.5 x 6.5 x 1 in. The WEN figure also tells you the bar runs longer than the 24 in opening. The MAXPOWER and HANSOM state no dimensions, so check the product photos against a known reference before ordering. Clamps longer than your shelf need a wall rack, not a drawer.

Check the bar length

A 24 in bar clamps 24 in of work, and the throat adds the reach. The listings here state the bar for all four clamps, so measure the work before ordering. A bar that is too short is a clamp you cannot use.

FAQ for welders

Which clamp for welding?

The MAXPOWER: forged steel for metalworking and welding.

Which has the most force?

The Jorgensen: 1500 lbs.

Which is a 4-pack?

The HANSOM: 4-pack, 350 lbs.

Which spreads too?

The WEN: bar clamps and spreaders.

Do any state a warranty?

No: none of the four state a warranty in this roundup’s data.

Scoring, line by line

The Gear Score weighs the force, the throat, the pack size and the type. The Jorgensen states 1500 lbs of clamping force; the MAXPOWER states 1200 lbs and forged full steel for metalworking and welding. None of the four state a warranty or certification. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Jorgensen 24 in Bar Clamp Set 9.6 28 22 21 n/a 0
MAXPOWER 24 in F Clamp 9.6 27 22 21 n/a 0
WEN 24 in Steel Bar Clamp 9.6 27 21 21 n/a 0
HANSOM 24 in Woodworking Clamp 9.6 26 21 21 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety points apply to gear that runs on power or lists safety features. Without either, we score out of 90 instead of 100.

More welding guides

See every flux core vs MIG guide and welding blanket guide.

More picks: step drill vs twist drill, straight vs offset tin snips.

More buying guides