Best Band Saw Blade Under 25 (2026): 5 Picks Compared
Band saw blade under 25: five budget band saw blades compared for tooth pitch, bi-metal build, saw fit and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallMK Morse Master Cobalt 3-Pack9.5/10View on Amazon - 2
Best M42 3-PackFOXBC M42 Portable 3-Pack9.4/10View on Amazon - 3
Best for 4×6 SawsImachinist M42 64-1/2 Blade9.4/10View on Amazon - 4
Best AssortmentAYAO 59-1/2 Assortment 3-Pack9.3/10View on Amazon - 5
Budget WoodAYAO 93-1/2 Wood 2-Pack9.3/10View on Amazon
The best band saw blade under 25 dollars is a bi-metal blade in the right length for your saw: bi-metal teeth stay sharp far longer than carbon steel on metal. The MK Morse Master Cobalt leads this group with a cobalt bi-metal edge, a 14/18 variable tooth pitch, Made in USA construction and a 3-pack. The FOXBC M42 follows with a 3-pack sized for Milwaukee portable saws. All five, ranked by their stated specs, are below.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall MK Morse Master Cobalt 3-Pack: Cobalt bi-metal, Made in USA, 3-pack. Check price on Amazon
- Best M42 3-Pack FOXBC M42 Portable 3-Pack: M42 bi-metal, 18 TPI, fits Milwaukee. Check price on Amazon
- Best for 4×6 Saws Imachinist M42 64-1/2 Blade: M42, 64-1/2 in, 10/14 TPI. Check price on Amazon
- Best Assortment AYAO 59-1/2 Assortment 3-Pack: Three widths for 9-inch saws. Check price on Amazon
- Budget Wood AYAO 93-1/2 Wood 2-Pack: 2-pack for 14-inch saws, wood. Check price on Amazon
The machines

Morse Master Cobalt Bi-Metal Portable Band Saw
Cobalt bi-metal portable band saw blades, 44-7/8 x 1/2 x .020, 14/18 TPI, Made in USA, in a 3-pack.
Pros
- Cobalt bi-metal edge
- 14/18 variable tooth pitch
- Made in USA
- 3-pack
Cons
- Portable saws only
- No warranty term stated
- 5.76 oz pack weight
- Gray industrial finish

FOXBC 35-3/8 Inch Bandsaw Blade 18 TPI
M42 bi-metal portable bandsaw blades, 35-3/8 x 1/2 x .020, 18 TPI, for Milwaukee saws, in a 3-pack.
Pros
- M42 bi-metal, heat resistant
- Sized for Milwaukee portables
- 18 TPI hook tooth profile
- 3-pack
Cons
- Milwaukee fit primarily
- No warranty term stated
- 18 TPI only
- 0.18 kg pack

Imachinist S6412121014 Bi-Metal Band Saw Blades
M42 bi-metal blade, 64-1/2 x 1/2 x .025, 10/14 TPI, for 4x6 band saws cutting ferrous metal.
Pros
- M42 bimetallic tooth tips
- Fits most 4x6 band saws
- 10/14 variable teeth
- Honest aluminum warning
Cons
- Single blade, not a pack
- Ferrous only, no aluminum
- No warranty term stated
- 160 g, heavier blade

AYAO 59 1/2 inch Bandsaw Blades Assortment
59-1/2 inch bandsaw blade assortment in 1/8, 1/4 and 3/8 widths for 9-inch benchtop saws.
Pros
- Three widths in one pack
- Fits many 9-inch saws
- Ground teeth stay sharp
- Raker set teeth
Cons
- Wood-oriented, not steel
- No warranty term stated
- Alloy steel, not bi-metal
- 150 g pack

AYAO 93-1/2 Inch X 1/4 Inch X 6TPI Band Saw Blade
93-1/2 x 1/4 inch 6 TPI high carbon steel blades, 2-pack, for 14-inch saws cutting wood.
Pros
- Fits many 14-inch saws
- 2-pack
- Strong weld point stated
- Raker set teeth
Cons
- Wood blade, not for metal
- High carbon steel only
- No warranty term stated
- 6 TPI too coarse for metal
Other welders and gear to compare
FOXBC 35-3/8 Inch Bandsaw Blade 24 TPI for MilwaukeeCheck price on Amazon
DEWALT Portable Band Saw BladeCheck price on Amazon
Starrett Duratec SFB Band Saw BladeCheck price on Amazon
FOXBC 32-7/8 Inch Bandsaw Blade 18 TPI for DeWalt DCS371BCheck price on Amazon
Imachinist S641212812 Bimetal Band Saw Blade 64-1/2" X 1/2" XCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Size | TPI | Material | Pack |
|---|---|---|---|---|---|
| MK Morse Master Cobalt | 9.5/10 | 44-7/8 x 1/2 in | 14/18 | Cobalt bi-metal | 3 |
| FOXBC M42 | 9.4/10 | 35-3/8 x 1/2 in | 18 | Bi-metal M42 | 3 |
| Imachinist M42 | 9.4/10 | 64-1/2 x 1/2 in | 10/14 | Bi-metal M42 | 1 |
| AYAO 59-1/2 | 9.3/10 | 59-1/2 in | 12, 10, 6 | Alloy steel | 3 |
| AYAO 93-1/2 | 9.3/10 | 93-1/2 x 1/4 in | 6 | High carbon steel | 2 |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 21 October 2026. Blade length must match your saw; none of these can be shortened to fit.
Buying guide: the best band saw blade under 25
Bi-metal vs carbon steel
Three of the five here are bi-metal: the Morse (cobalt bi-metal), the FOXBC (M42) and the Imachinist (M42). Bi-metal pairs a flexible back with hard high-speed-steel teeth, which is why the Morse claims a shock-resistant cutting edge for any machinable metal. The two AYAO listings are carbon or alloy steel, which suits wood and light work but dulls fast on steel. For metal cutting under 25 dollars, bi-metal is the line between a blade that lasts and one that does not. See our bi-metal vs carbide band saw blade comparison.
Tooth pitch and material
Tooth pitch (TPI) should match the material. The Morse at 14/18 variable pitch covers a broad range of metals; the FOXBC at 18 TPI suits thinner stock and fine cuts; the Imachinist at 10/14 variable pitch suits thicker ferrous sections. The Imachinist listing warns against cutting aluminum with its 10/14 pitch, a useful honesty. The AYAO 93-1/2 at 6 TPI and the assortment at 6 to 12 TPI are wood pitches. Finer teeth for thin metal, coarser teeth for thick sections and wood.
Length must match the saw
Blade length is not adjustable: 44-7/8 inches fits portable band saws (Morse), 35-3/8 inches fits the Milwaukee compact (FOXBC), 64-1/2 inches fits 4×6 saws (Imachinist), 93-1/2 inches fits 14-inch stationary saws (AYAO), and 59-1/2 inches fits 9-inch benchtop saws (AYAO assortment). Measure your saw’s required length before buying; a blade that is an inch off will not track.
Pack size and value
The Morse and FOXBC come as 3-packs, the AYAO 93-1/2 as a 2-pack, the AYAO assortment as 3 blades of different widths, and the Imachinist as a single blade. Under 25 dollars, a multi-pack spreads the cost per blade and keeps a spare on hand when one dulls mid-project. The assortment’s three widths (1/8, 1/4, 3/8 inch) cover different cut types on a 9-inch saw.
Portable saw blades vs shop saw blades
The lengths here tell you which saw each blade fits. The MK Morse 44-7/8 inch and the FOXBC 35-3/8 inch are portable band saw blades: the MK Morse lists portable saws including compacts, and the FOXBC names the Milwaukee 48-39-0529 and 2829-20. The Imachinist 64-1/2 inch fits most 4×6 horizontal band saws. The AYAO 93-1/2 inch fits 14 inch Delta, Rikon, Jet, Grizzly and similar saws, and the AYAO 59-1/2 inch fits 9 inch Ryobi, Craftsman, Skil, WEN BA3959 and others. Measure your saw’s required length before anything else: a blade that is 1/8 inch off will not tension.
Blade width decides straight cuts vs curves
Width is the second match after length. The portable blades here are 1/2 inch wide, the Imachinist is 1/2 inch, the AYAO 93-1/2 is 1/4 inch, and the 9 inch assortment gives 1/8, 1/4 and 3/8 inch. Wider blades track straighter: 1/2 inch for straight metal cuts, 1/4 inch for general work, 1/8 inch for tight curves in wood. The AYAO assortment exists for exactly this reason: swap the 3/8 inch in for resawing straight cuts, the 1/8 inch for scrollwork. Width must also match your saw’s wheel and guide capacity; a 9 inch saw takes the narrow blades, not the 1/2 inch portables.
Thickness and the break-in rule
The listings state .020 inch (MK Morse, FOXBC), .025 inch (Imachinist) and 0.017 inch (AYAO 93-1/2). Thicker blades hold a straighter line; thinner blades turn tighter. All five are thin-gauge blades, which is why the buying guide’s break-in advice matters: run a new bi-metal blade through a few slow, light cuts before full speed so the teeth settle. The Imachinist listing frames its variable teeth for solid bar, hollow tube and profile cutting, where tooth loading varies through the cut.
Variable pitch vs constant pitch
The MK Morse runs 14/18 variable pitch and the Imachinist 10/14, while the FOXBC is a constant 18 and the AYAO 93-1/2 a constant 6. Variable pitch spreads vibration across tooth sizes, which the MK Morse lists as reduced vibration for improved cut finish and cutting fatigue, and it handles a broader range of material thickness in one blade. Constant pitch cuts most smoothly in material it matches: 18 TPI for thin metal, 6 TPI for wood. The Imachinist listing even orders its pitch ladder from 6 to 24 TPI so you can see where 10/14 sits for thick ferrous metal.
Respect the material warnings
The Imachinist listing is explicit: do NOT cut aluminum or other non-ferrous metal with the 10/14, which is for soft ferrous metal only. The MK Morse, by contrast, lists aluminum, carbon steel, metal, plastic and stainless steel as compatible materials. The AYAO 93-1/2 lists plastic, PVC and wood, and the 59-1/2 assortment lists aluminum, plastic and wood. A blade that cuts steel badly usually fails on aluminum because the wrong pitch loads up; buy the blade whose listing names your material, not the one that is merely cheap.
Pack size and who makes it
Under 25 dollars, pack size is the value lever. The MK Morse is a 3-pack of cobalt bi-metal made in the USA with a shock resistant cutting edge. The FOXBC is a 3-pack of bi-metal M42 high speed steel with heat resistant welds. The AYAO 59-1/2 is a 3-blade assortment in three widths, and the AYAO 93-1/2 is a 2-pack. Only the Imachinist is a single blade, but it is the only M42 bimetallic tooth tip blade here for 4×6 saws. Blades are consumables: a 3-pack means you keep cutting when one dulls mid-project instead of stopping to order.
Warranty
None of the five listings states a warranty term. The Imachinist listing says to contact them about a wrong or defective blade, which is not a stated warranty term, so no warranty is counted for any of them.
Before You Strike an Arc
- Match the blade length to your saw exactly: 44-7/8, 35-3/8, 64-1/2, 93-1/2 or 59-1/2 inches here.
- Pick TPI for the material: 14/18 or 18 for thin metal, 10/14 for thick ferrous, 6 for wood.
- Do not cut aluminum with the Imachinist 10/14, per its listing.
- Break in a new bi-metal blade with a few slow cuts before full speed.
FAQ for welders
Which is the best bi-metal blade here?
The MK Morse Master Cobalt: cobalt bi-metal, 14/18 variable pitch, Made in USA, in a 3-pack.
Which blade fits a Milwaukee portable saw?
The FOXBC 35-3/8 inch, listed for the Milwaukee 48-39-0529 and 2829-20.
Which blade fits a 4×6 band saw?
The Imachinist 64-1/2 inch, in M42 bi-metal with 10/14 TPI for ferrous metal.
Are the AYAO blades for metal?
The 93-1/2 is listed for wood and general purpose; the 59-1/2 assortment lists aluminum, plastic and wood. Neither is a steel-cutting blade.
Which of these states a warranty?
None. No warranty term is stated on any of the five listings.
Related: the best band saw blade for metal, the best band saw blade for aluminum and our hacksaw vs band saw for metal comparison.
Scoring, line by line
All five blades are scored on performance, build, value, safety and warranty, using only what each listing publishes. Bi-metal construction, stated material compatibility and pack size separate the top two from the rest.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| MK Morse Master Cobalt 3-Pack | 9.5 | 26 | 20 | 20 | n/a | 0 |
| FOXBC M42 Portable 3-Pack | 9.4 | 23 | 19 | 20 | n/a | 0 |
| Imachinist M42 64-1/2 Blade | 9.4 | 23 | 19 | 18 | n/a | 0 |
| AYAO 59-1/2 Assortment 3-Pack | 9.3 | 20 | 18 | 19 | n/a | 0 |
| AYAO 93-1/2 Wood 2-Pack | 9.3 | 19 | 18 | 18 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.




