Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Cold Chisel for Metal (2026): 5 Picks for the Shop

Five cold chisels for metal compared on steel type, hardness, size range, hand guards and warranty, from single chisels to 16-piece sets.

Best Cold Chisel for Metal (2026): 5 Picks for the Shop
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Mayhew 3/4 x 7 inBest OverallMayhew 3/4 x 7 in9.7/10View on Amazon
  2. 2Mayhew Handguarded 3/4 x 12Best HandguardMayhew Handguarded 3/4 x 129.7/10View on Amazon
  3. 3TEKTON 1 in 66009Widest CutTEKTON 1 in 660099.7/10View on Amazon
  4. 4C&T 3-Piece 3/8-5/8 inBest 3-Piece SetC&T 3-Piece 3/8-5/8 in9.6/10View on Amazon
  5. 5AMM 16-Pc Punch Chisel SetMost PiecesAMM 16-Pc Punch Chisel Set9.5/10View on Amazon

A cold chisel is the simplest way to cut a bolt, split a nut or clean weld slag where the grinder cannot reach. The best cold chisel for metal holds its edge and strikes true without mushrooming. We compared five listings on steel type, hardness, size range, hand guards and warranty, using only what each listing publishes.

Affiliate disclosure.>

Quick picks

  • Best Overall Mayhew 3/4 x 7 in: Alloy steel, ASME B107_401 stated, lifetime replacement warranty Check price on Amazon
  • Best Handguard Mayhew Handguarded 3/4 x 12: 12 inch handguarded chisel with 2-year warranty Check price on Amazon
  • Widest Cut TEKTON 1 in 66009: 1 inch high carbon steel, made in USA Check price on Amazon
  • Best 3-Piece Set C&T 3-Piece 3/8-5/8 in: 3/8, 1/2, 5/8 inch chrome vanadium, 54-58HRC Check price on Amazon
  • Most Pieces AMM 16-Pc Punch Chisel Set: 16-piece punch and chisel set with roll-up pouch Check price on Amazon

The machines

Mayhew Select 10602 3/4-by-7-Inch Cold Chisel

Mayhew Select 10602 3/4-by-7-Inch Cold Chisel

Mayhew9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/4 by 7 inch alloy steel cold chisel, made in the USA, with a stated ASME standard and a lifetime replacement warranty.

Pros

  • Alloy steel, heat treated, meets ASME B107_401 (stated)
  • Made in the USA with rust preventative coating
  • Lifetime Replacement warranty is stated
  • 3/4 inch width suits V-grooves and general cutting

Cons

  • Single chisel, no set option in this listing
  • No hand guard
  • No hardness rating (HRC) is stated
Mayhew Select 12205 3/4-by-12-Inch Handguarded

Mayhew Select 12205 3/4-by-12-Inch Handguarded

Mayhew9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/4 by 12 inch handguarded cold chisel with a 5/8 inch hex body, made in the USA, with a 2-year limited warranty.

Pros

  • Hand guard protects the striking hand
  • 12 inch length, the longest here
  • 2-Year Limited Warranty is stated
  • Made in the USA

Cons

  • Single chisel only
  • Not for masonry, per the listing
  • No hardness rating (HRC) is stated
  • Handguard adds bulk in tight spaces
TEKTON 1 Inch Cold Chisel | 66009 | Made in USA

TEKTON 1 Inch Cold Chisel | 66009 | Made in USA

TEKTON9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1 inch high carbon steel cold chisel, made in the USA, with individual heat treatment and a no-time-limit warranty.

Pros

  • High carbon steel, forged and machined, individually heat treated
  • 1 inch width, the widest cutting edge here
  • Made in the USA
  • Rust-preventative coating with dry-touch finish

Cons

  • Single chisel only
  • No hand guard
  • No hardness rating (HRC) is stated
  • No warranty term with a concrete duration is stated
C&T 3-Piece Heavy Duty All Purpose Cold Chisels

C&T 3-Piece Heavy Duty All Purpose Cold Chisels

C&T9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece cold chisel set in 3/8, 1/2 and 5/8 inch, chrome vanadium steel at 54 to 58HRC, with size markings.

Pros

  • Three sizes: 3/8, 1/2 and 5/8 inch
  • Chrome vanadium steel, 54 to 58HRC stated
  • Size markings on each chisel
  • Covers metalwork, woodwork and masonry per the listing

Cons

  • No warranty term is stated
  • No hand guard
  • No storage case is included
16PC Heavy Duty Punch Chisel Set

16PC Heavy Duty Punch Chisel Set

AMM9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 16-piece punch and chisel set with three cold chisels, chrome vanadium steel at 54 to 58HRC, in a roll-up pouch.

Pros

  • 16 pieces: punches, chisels and a gauge in one set
  • Chrome vanadium steel, 54 to 58HRC stated
  • Roll-up pouch with imprinted sizes
  • 3 cold chisel sizes: 3/8, 1/2 and 5/8 inch

Cons

  • Only 3 of 16 pieces are cold chisels
  • No warranty term is stated
  • No hand guard on the chisels
  • More than a chisel-only buyer needs

Other welders and gear to compare

Spec sheet comparison

Chisel Gear Score Type Sizes Steel Warranty
Mayhew 3/4 x 7 in 9.7/10 Single 3/4 x 7 in Alloy steel Lifetime Replacement
Mayhew Handguarded 3/4 x 12 9.7/10 Single, handguard 3/4 x 12 in Metal 2-Year Limited Warranty
TEKTON 1 in 66009 9.7/10 Single 1 in High carbon Not stated
C&T 3-Piece 3/8-5/8 in 9.6/10 3-piece set 3/8, 1/2, 5/8 in Chrome vanadium Not stated
AMM 16-Pc Punch Chisel Set 9.5/10 16-pc set 3/8, 1/2, 5/8 in chisels Chrome vanadium Not stated

Treat the specs as maker ratings pulled straight from the listings; we gathered them on 22 October 2026.

Buying guide: the best cold chisel for metal

Steel and hardness

Steel sets how long an edge lasts. The C&T and AMM listings state chrome vanadium steel at 54 to 58HRC. The TEKTON lists high carbon steel, and the Mayhew 10602 lists alloy steel. Where a listing states no hardness, treat the edge as unrated.

Size and length

Width sets the cut: 1 inch on the TEKTON for heavy work, 3/4 inch on both Mayhews, and 3/8 to 5/8 inch in the sets. Length sets reach and hand clearance: 12 inches on the handguarded Mayhew, 8 inches on the TEKTON, 7 inches on the Mayhew 10602.

Sets or a single chisel

A set covers more jobs in one buy. The C&T 3-piece gives three widths for metalwork, while the AMM 16-piece adds punches and a gauge but only three chisels. A single chisel like the TEKTON or Mayhew suits a buyer who knows the exact width needed. See our best cold chisel set for more sets.

Hand guards

Only the Mayhew 12205 lists a hand guard, which keeps the striking hand clear of a missed hammer blow. The other four have no guard, so they suit careful bench work with the workpiece clamped. Browse all metal fab tools we cover.

Use as directed. Wear safety glasses and gloves when striking a chisel, clamp the workpiece, and check the striking end for mushrooming before each use. A mushroomed head can chip and throw fragments. See the OSHA welding overview.

FAQ for welders

What is a cold chisel used for?

Cutting rivets, rods and bolts, removing weld slag, and cutting or shaping metal softer than the chisel edge. The listings cover steel, brass, bronze, cast iron, copper and aluminium.

What size cold chisel do I need?

Match the width to the cut. These listings offer 3/8, 1/2, 5/8 and 3/4 inch in the sets and singles, plus a 1 inch TEKTON for the heaviest cuts.

Can I use a cold chisel on hardened steel?

The listings say to cut metal softer than the cutting edge. The C&T and AMM state 54 to 58HRC; where no hardness is stated, the edge is unrated.

Do cold chisels need sharpening?

Edges dull with use. The TEKTON listing describes a second sharpening after heat treating at the factory, which implies re-sharpening is normal maintenance. None of the listings include sharpening instructions.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty. Cold chisels carry no electrical safety listing, so every chisel here scores zero on safety; the ranking comes from the other four. Two listings state a warranty with a concrete term. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Mayhew 3/4 x 7 in 9.7 30 22 20 n/a 4
Mayhew Handguarded 3/4 x 12 9.7 30 21 20 n/a 3
TEKTON 1 in 66009 9.7 32 21 21 n/a 0
C&T 3-Piece 3/8-5/8 in 9.6 29 20 21 n/a 0
AMM 16-Pc Punch Chisel Set 9.5 26 19 22 n/a 0

Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.

Related: best cold chisel set, metal fab tools.

More buying guides