Best MIG Welder Under $1000: 6 Picks for the Serious Home Shop
Six MIG machines between $500 and $1000, compared on stated duty cycle, 120V output, aluminum setup and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEastwood MIG 180 Kit9.6/10View on Amazon - 2
Best for AluminumARCCAPTAIN MIG250DP9.5/10View on Amazon - 3
Longest WarrantyARCCAPTAIN MIG205 Pro9.5/10View on Amazon - 4
Best ValueYESWELDER MIG-250DS PRO9.5/10View on Amazon
This guide is for home shop, farm and auto restoration welders ready to spend between $500 and $1000 on a MIG machine, and who want the step up to show in numbers: a stated duty cycle, a known output on 120V, an aluminum setup and a written warranty. If your budget stops at $500, start with our best MIG welder under $500 instead.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Eastwood MIG 180 Kit: The only machine here that states a duty cycle and its 120V output, 30% at 90A, with a spool gun in the box and a 3 year limited warranty. Check price on Amazon
- Best for Aluminum ARCCAPTAIN MIG250DP: Single and double pulse MIG, with an aluminum liner and U groove rollers included. Check price on Amazon
- Longest Warranty ARCCAPTAIN MIG205 Pro: A stated 3 year manufacturer warranty, inductance control from -10 to +10 and app settings. Check price on Amazon
- Best Value YESWELDER MIG-250DS PRO: The lowest priced machine here when we collected listings and the most owner ratings, with pulsed MIG. Check price on Amazon
The machines

Eastwood 180 Amp MIG Welder Machine Dual Voltage
A 30 to 180A dual voltage MIG with its 120V output and duty cycle in writing, a spool gun in the box and a 3 year limited warranty.
Pros
- States its 120V numbers: 30 to 90A output and a 30% duty cycle at 90A
- Spool gun included, for aluminum from 14 gauge to 1/4 inch per the listing
- Rated mild steel range of 24 gauge to 5/16 inch on 240V and 3/16 inch on 120V
- 3 year limited warranty, a 90 day return window and lifetime tech support
Cons
- No duty cycle published for 240V input
- Weight stated as under 26 lb in the bullets and 49 lb in the table, which likely includes the spool gun and packaging
- Runs MIG and flux core only, no stick or TIG mode
- Wire limited to .023 to .035 inch on 4 and 8 inch spools

ARCCAPTAIN Double Pulse MIG Welder 250A 8-in-1
A 250A double pulse MIG that ships with an aluminum liner and rollers, for steel and aluminum on 220V.
Pros
- Single and double pulse MIG, with adjustable background level, frequency and pulse duty
- Graphene liner and U .035 to .040 inch rollers for aluminum in the box
- Listing says 220V input is needed for the full 250A, an honest note others skip
- 2 year manufacturer warranty in the listing
Cons
- No duty cycle rating in the listing
- No output figure for 110V input, only 'light jobs'
- First listed in June 2026, with few owner ratings so far
- Spool gun and Lift TIG torch sold separately

ARCCAPTAIN 250A MIG Welder 110V 220V 6 in 1
A 250A six mode MIG with a full accessory list, synergic setup and a 2 year warranty, most owner ratings of the ARCCAPTAIN machines here.
Pros
- The listing names every item in the box, including 10 ft torch, ground and stick leads
- Synergic setup by wire diameter and gas, with a manual mode
- Adaptive crater, burn back and pre and post flow controls
- 2 year manufacturer warranty in the listing
Cons
- No duty cycle rating in the listing
- Title says 110V and 220V, the table says 220 volts
- No output figure for 110V input
- Spool gun and Lift TIG torch sold separately

ARCCAPTAIN MIG205 Pro MIG Welder 205A 120V 240V
A 205A six mode MIG with app control, inductance adjustment and the longest stated manufacturer warranty here, 3 years.
Pros
- 3 year manufacturer warranty in the listing
- Inductance from -10 to +10, burn back from 0.15 to 0.5 ms and 0.5 to 5 s spot timer
- Wire feed up to 640 inches per minute from a 40W feeder
- Settings can be saved and adjusted through a phone app
Cons
- No duty cycle rating in the listing
- Table says 240 volts while the title says 120V and 240V
- Item weight of 10 lb in the table looks low for this class, confirm before planning around it
- Spool gun and Lift TIG torch sold separately

YESWELDER 250A MIG Welder
A 250A pulsed MIG with the most owner ratings in this guide, listed since 2020, and wire sizes spelled out for steel and aluminum.
Pros
- Most owner ratings of any machine here, listed since July 2020
- Pulsed MIG plus synergic mode with plus or minus 3V trim
- Lists .023 to .035 inch steel and flux wire and .035 to .045 inch aluminum wire
- Graphene liner and drive rollers in the box
Cons
- No warranty term in the listing
- No duty cycle rating in the listing
- No output figure for 110V input
- Spool gun and Lift TIG torch sold separately

PrimeWeld MIG180 Mig Welder
A 180A dual voltage MIG, flux core and stick machine that takes standard Tweco consumables, with US based parts and support.
Pros
- Takes standard Tweco consumables, easy to find at a welding supply
- MIG and flux drive rollers and an electrode holder included
- Listing says employees, parts and customer service are in the USA
- Dual 120V and 240V input
Cons
- No duty cycle rating in the listing
- No warranty term, only a promise to make things right
- The listing mentions a PrimeWeld spool gun but does not clearly say it is in the box
- Heaviest machine here at 55 lb
Other welders and gear to compare
ANDELI Multiprocess MIG WelderCheck price on Amazon
Eastwood 180 Amp MIG Welder Machine Dual Voltage 110V 220VCheck price on Amazon
YESWELDER 135A MIG WelderCheck price on Amazon
ARCCAPTAIN 130A Flux Core Welder MIG Welder 110V Gasless MIGCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Max output | Input | Duty cycle | Processes | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Eastwood MIG 180 Kit | 9.6/10 | 180A (90A on 120V) | 120V/240V | 30% at 90A (120V) | MIG, flux core, spool gun | Under 26 lb (machine), 49 lb (package) | 3 year limited |
| ARCCAPTAIN MIG250DP | 9.5/10 | 250A on 220V | 110V/220V | Not stated | Double pulse MIG, MIG, flux core, stick, Lift TIG, spot | 39.4 lb | 2 years |
| ARCCAPTAIN MIG250 | 9.5/10 | 250A | 110V/220V (table: 220V) | Not stated | MIG, flux core, stick, Lift TIG, spot, spool gun | 32.7 lb | 2 years |
| ARCCAPTAIN MIG205 Pro | 9.5/10 | 205A | 120V/240V (table: 240V) | Not stated | MIG, flux core, stick, Lift TIG, spot, spool gun | 10 lb (table, unverified) | 3 years |
| YESWELDER MIG-250DS PRO | 9.5/10 | 250A | 110V/220V | Not stated | Pulsed MIG, MIG, flux core, spool gun, Lift TIG, stick | 37.6 lb | Not stated |
| PrimeWeld MIG180 | 9.4/10 | 180A | 120V/240V | Not stated | MIG, flux core, stick, spool gun | 55 lb | Support promise only |
All specs here repeat what the maker rates and the listing prints, copied down 4 October 2026. Where a listing states a figure two ways, the table shows both.
What you get for $500 to $1000
A duty cycle you can plan around
Of the 14 MIG listings we looked at between $500 and $1000, only 3 stated a duty cycle with an amperage: two for the same Eastwood machine, with and without a spool gun, and one for a stick welder. Among the MIG machines in this guide, only Eastwood publishes one: 30% at 90A on 120V, or about 3 minutes of welding in every 10. Paying more does not guarantee a published figure, so ask the seller before you buy if you run long seams.
Output on 120V
All six machines advertise dual voltage, but only Eastwood gives a 120V output range, 30 to 90A, and only ARCCAPTAIN’s MIG250DP says outright that the full 250A needs 220V. Two listings, the ARCCAPTAIN MIG250 and MIG205 Pro, show only 220 or 240 volts in their specification tables. If you plan to weld 1/4 inch steel and up, budget for a 240V circuit installed by a licensed electrician.
Aluminum: spool gun or push feed
Five of the six listings mention aluminum. The Eastwood kit includes a spool gun. The ARCCAPTAIN MIG250DP ships with a graphene liner and U groove rollers for pushing aluminum wire through the main torch. The rest need a spool gun bought separately, and the PrimeWeld listing is unclear on whether its gun is included.
Warranty in writing
This is where the extra money shows most clearly. Across the 14 listings, 8 stated a warranty term, against 6 of 13 below $500. Two machines here state 3 years, Eastwood and the ARCCAPTAIN MIG205 Pro, and two state 2 years. None of the 14 listings stated a CSA, UL or ETL listing, so no machine scores above zero for safety.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, flame resistant clothing and leather gloves, weld with good ventilation, and clear anything flammable from the area. See the OSHA welding overview and our Safety Disclaimer.
FAQ for welders
Is a MIG welder under $1000 worth it over a $500 machine?
Only if the extra money buys something you will use. In this guide that means a stated 120V output and duty cycle (Eastwood), an included spool gun (Eastwood), aluminum ready push feed (ARCCAPTAIN MIG250DP) or a 3 year written warranty. Peak amperage alone is not a reason to spend more.
How much can these machines weld on 120V?
Only Eastwood says: 30 to 90A, and mild steel up to 3/16 inch, manufacturer rated. The other five listings do not state an output for 120V input, so do not assume the headline amperage applies on a household outlet.
Do I need a spool gun to MIG weld aluminum?
Not always. A spool gun keeps soft aluminum wire from tangling over a long liner. Some machines, like the ARCCAPTAIN MIG250DP here, ship with a liner and rollers for feeding aluminum through the main torch instead. The Eastwood kit includes a spool gun.
What does 30% at 90A mean?
It means the machine can weld about 3 minutes in every 10 at 90A before it needs to cool. At lower amperage the usable time is longer. A duty cycle without an amperage cannot be compared between machines.
Do these welders come with a gas regulator?
None of the six listings names a regulator in the box. Plan on a regulator and a cylinder if you want to run solid wire with shielding gas.
Related: best MIG welder under $500, best multi-process welder, and the MIG welders hub. Also see our Hobart Handler 210i vs Millermatic 211 PRO. Also see our best mig welder under 300. Also see our best flux core welder under 200. Also see our best welder generator. Also see our what is synergic mig welding.
More related guides (217)
- best extension cord for portable welder
- welding machine types
- best welding machine for stainless steel
- best welder under 400
- best welder for body panels
- flux core welding vs tig
- flux core welding vs stick welding
- inverter welder vs transformer welder
- why does my mig wire keep burning back to the tip
- how to fix mig wire birdnesting
- can you run a mig welder on a 15 amp circuit
- can you mig weld without gas
- hobart handler 140 vs 140ez
- what causes porosity in mig welds
- flux core vs mig with gas
- millermatic 141 vs 142
- 120v vs 240v mig welder
- mig welder settings for 1/8 inch steel
- mig welder wire speed and voltage chart
- how to set gas flow rate for mig welding
- how thick can a 120v mig welder weld
- mig welder duty cycle explained
- what size mig wire for sheet metal
- how to mig weld thin sheet metal without burning through
- what size generator to run a mig welder
- what polarity for flux core welding
- how to change the wire spool on a mig welder
- push vs pull mig welding
- mig welding stick out length explained
- how long does a 10 lb spool of mig wire last
- harbor freight titanium vs hobart mig welder
- mig welding vertical up vs vertical down
- yeswelder vs hobart mig welder
- best mig welder with spool gun included
- spool gun settings for aluminum
- gasless mig welding for beginners
- stud welder for aluminum
- best handheld laser welder cost
- is gasless mig welding strong
- flux core welding pros and cons
- stud welder sizes
- gasless mig welder pros and cons
- what is a stud welder
- mig welder problems
- best welding machine company
- welder maintenance
- stick vs mig welder
- stick vs tig welder
- dual voltage vs single voltage welder
- spool gun vs push pull gun
- welding equipment for beginners
- tooliom 200a review
- tooliom 135a review
- multi-process welder vs tig welder
- pulse mig vs standard mig welder
- engine driven welder vs portable generator
- rotary positioner vs welding turntable
- pyrex cup vs ceramic tig cup
- analog vs digital tig welder
- rotary phase converter vs vfd for welder
- laser welder vs cold welder
- single phase vs 3 phase welder
- dual pulse mig vs single pulse mig
- gas mig vs gasless flux core welder
- laser welder for battery terminals
- welder backpack for men
- stick welder vs multi-process welder
- best all around stick welding rod
- oxy acetylene vs stick welder
- mig vs tig for auto body
- angle clamp vs c clamp
- portable vs stationary welder
- oxy acetylene vs mig welder
- best welder backpack under 80
- 1/16 vs 3/32 tungsten electrode
- forney vs hobart mig welder
- tig vs stick welding for pipe
- mig vs tig for stainless steel
- portable mig vs portable stick welder
- spot welder vs mig welder
- synergic mig vs pulsed mig welder
- ac tig vs dc tig welder
- pure tungsten vs thoriated tungsten
- 308 welding rod vs 309
- welding jacket vs welding sleeves
- oxy acetylene vs tig welder
- air cooled vs water cooled mig gun
- best welding cable under 50
- 1/0 vs 2/0 welding cable
- analog vs digital mig welder
- best welding goggles for grinding
- best welding cable for home shop
- copper vs aluminum welding cable
- stick welder vs mig welder for truck repairs
- best cutting fluid for metal
- 20v vs 60v cordless angle grinder
- welding cable vs jumper cable
- best extension cord for mig welder
- best welder backpack for job site
- flux core vs mig for thick steel
- flux core vs stick for farm repairs
- mig vs stick for thick steel
- left vs right cut aviation snips
- best cable lugs under 15
- flux core vs stick for outdoor use
- mig vs stick for auto body
- 120v mig vs 120v tig welder
- tig vs stick for stainless steel
- flex head vs rigid tig torch
- best spot welder for hobbyists
- wool vs fiberglass welding blanket
- best welding electrode holder for farm use
- welding plug adapter
- flux core vs mig for outdoor use
- mig vs tig for mild steel
- stainless steel chipping hammer
- mig vs tig for thick steel
- tig vs stick for farm repairs
- tig vs stick for home garage
- tig vs stick for mild steel
- welding cable kits 25 50 feet
- welding machine extension cord 50 amp
- welder extension cord 8 awg
- mig vs stick for mild steel
- tig vs mig for cast iron
- flux core vs stick for truck repairs
- dinse vs tweco welding connector
- hobart handler 140 vs 190
- inverter generator vs conventional generator for welding
- hobart handler 140 vs yeswelder mig-205ds
- flux core vs mig for galvanized steel
- mig vs stick for rusty metal
- inverter generator for welder
- best inverter generator for welder under 1000
- 25 vs 50 ft extension cord for welder
- tig torch vs mig gun
- 2 awg welding cable
- lincoln power mig 180c vs yeswelder mig-205ds
- aluminum welder rods
- welding hose reel retractable
- best mig welder that runs on a generator
- best dual pulsed mig welder
- best spot welder for auto body
- best pulse mig welder for aluminum
- mig welding for beginners
- mig welding machine for beginners
- mig welder set up
- welder kit for beginners
- parts of tig torch
- how do you tig weld aluminum
- epdm vs pvc welding cable
- stud welder dent repair kit
- flux core wire welding tips
- can aluminum be mig welded
- air chipping hammer kit set 190 mm
- best welding machine for auto body work
- best welding plug adapter under 30
- gasless vs gas mig welder
- wire feeder vs spool gun
- stick welding for beginners
- tig torch set up
- mig welder for auto body repair
- spot welder tips
- 240v flux core vs 240v stick welder
- flux core welding settings chart
- mig welder wire feed problems
- mig welder types
- tig welding aluminum problems
- welding cable connector types
- how hot is a welding torch
- mig welding amperage chart
- tig welding tips and tricks
- types of tig welders
- tig welding torch types
- mig welding overhead tips
- uses for spot welder
- mig vs stick for aluminum
- stick welding tips and tricks
- aluminum mig welding tips
- manual metal arc welder
- welding torch types
- vertical stick welding tips
- flux core welding setup
- spot welder parts
- carbon arc gouging setup
- how to set up a welding machine
- best inverter generator with electric start
- spot welder for car body repair
- water cooled tig torch setup
- mig wire feeder parts
- how to set oxy acetylene regulators for cutting
- brazing torch setup
- welding cable price
- diagram arc welding machine parts
- portable laser welding machine price
- stick welding machine for beginners
- aluminum mig settings chart
- flux core welding problems
- are flux core welders any good
- stick welder price
- how to flux core weld sheet metal
- best heavy duty hand truck
- grinding disc for concrete
- hvlp spray gun vs conventional spray gun
- tapping drill chart
- size s drill bit
- welder repair
- parts of a mig welder
- 6 combination square
- hand truck small
- best flux core welder for auto body repair
- best fume extractor for laser cutting
- micrometer set 0-12
- non digital caliper
- media blast vs sandblast
- best welder for auto body
- dial bore gauge vs telescoping gauge
Background reading: how to choose a MIG welder, welding duty cycle explained 120V vs 240V welder and a Black Friday welder deal checklist.
Scoring, line by line
Each machine is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. A spec the listing does not publish scores nothing.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Eastwood MIG 180 Kit | 9.6 | 30 | 22 | 20 | 0 | 3 |
| ARCCAPTAIN MIG250DP | 9.5 | 30 | 21 | 20 | 0 | 3 |
| ARCCAPTAIN MIG250 | 9.5 | 29 | 20 | 21 | 0 | 3 |
| ARCCAPTAIN MIG205 Pro | 9.5 | 29 | 20 | 20 | 0 | 3 |
| YESWELDER MIG-250DS PRO | 9.5 | 29 | 20 | 22 | 0 | 0 |
| PrimeWeld MIG180 | 9.4 | 27 | 21 | 20 | 0 | 1 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.






