Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

1/16 vs 3/32 Tungsten Electrode: Which Size to Buy

Three 10-packs of TIG tungsten electrodes compared: two blue 1/16 in 2% lanthanated listings against one red tip 3/32 in WT20/EWTh-2 listing.

1/16 vs 3/32 Tungsten Electrode: Which Size to Buy
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Midwest Tungsten Service Blue 1/16" TIG TungstenMidwest Tungsten Service Blue 1/16" TIG Tungsten9.6/10View on Amazon
  2. 2YESWELDER TIG Welding Tungsten Electrode 2%YESWELDER TIG Welding Tungsten Electrode 2%9.6/10View on Amazon
  3. 3YESWELDER TIG Welding Tungsten Electrode Red TipYESWELDER TIG Welding Tungsten Electrode Red Tip9.6/10View on Amazon

Verdict. Pick the diameter your torch collets fit: the two 1/16 in listings are both blue 2% lanthanated WL20/EWLa-2, and the 3/32 in listing is a red tip WT20/EWTh-2. The Midwest 1/16 leads on stated US-based support with a safety data sheet and certificate of conformance; the YESWELDER 1/16 leads on stated length and vacuum packing. None of the three states a warranty.

The 1/16 vs 3/32 tungsten electrode question is really a diameter question: two of these three listings are 1/16 in blue lanthanated electrodes, and one is a 3/32 in red tip electrode. This comparison puts all three ten-packs side by side on what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The three electrodes

Midwest Tungsten Service Blue 1/16" TIG Tungsten

Midwest Tungsten Service Blue 1/16" TIG Tungsten

Midwest Tungsten Service9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of blue 1/16 in 2% lanthanated TIG tungsten electrodes, WL20/EWLa-2, AC and DC rated.

Pros

  • Blue 1/16 in, 2% lanthanated, 10-pack
  • WL20/EWLa-2 designation stated
  • Exceptional for AC and DC applications stated
  • United States based manufacturing and service stated

Cons

  • No warranty term is stated
  • No length figure is stated
  • No weight figure is stated
  • No stated packaging detail
YESWELDER TIG Welding Tungsten Electrode 2%

YESWELDER TIG Welding Tungsten Electrode 2%

YESWELDER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of blue 1/16 in x 7 in 2% lanthanated TIG tungsten electrodes, WL20/EWLa-2, vacuum packed.

Pros

  • Blue 1/16 in x 7 in, 2% lanthanated, 10-pack
  • WL20/EWLa-2 designation stated
  • AWS A5.12M/A5.12:2009 conformance stated
  • Vacuum packing against oxidation stated

Cons

  • No warranty term is stated
  • 3.52 ounces for the 10-pack
  • Single listing number, no multi-size box
  • Color-coded packaging only, not the electrodes
YESWELDER TIG Welding Tungsten Electrode Red Tip

YESWELDER TIG Welding Tungsten Electrode Red Tip

YESWELDER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of red tip 3/32 in x 7 in TIG tungsten electrodes, WT20/EWTh-2, in a sealed aluminum tube.

Pros

  • Red tip 3/32 in x 7 in, WT20/EWTh-2, 10-pack
  • AWS A5.12M/A5.12:2009 conformance stated
  • High-strength sealed aluminum tube packaging
  • Stable, continuous arc with thermostability stated

Cons

  • No warranty term is stated
  • 6.7 ounces for the 10-pack
  • Red tip only, no composition detail beyond WT20
  • Dual-open tube must be resealed after use

Other welders and gear to compare

Side by side

Electrode Weld Score Diameter Type Count Standard
Midwest 1/16 Blue 10-Pack 9.6/10 1/16 in 2% lanthanated 10-pack A5.12M/A5.12:2036
YESWELDER 1/16 Blue 10-Pack 9.6/10 1/16 in x 7 in 2% lanthanated 10-pack A5.12M/A5.12:2009
YESWELDER 3/32 Red 10-Pack 9.6/10 3/32 in x 7 in WT20/EWTh-2 10-pack A5.12M/A5.12:2009

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026. None of the three listings states a warranty or an amperage range.

1/16 vs 3/32 tungsten electrode: the diameter gap

1/16 in is the thinner electrode; 3/32 in is wider. The two 1/16 in listings are both 2% lanthanated with the WL20/EWLa-2 designation, while the 3/32 in listing is WT20/EWTh-2 with a red tip band. None of the listings states an amperage range or a thickness range, so pick the diameter that matches your torch collets and the work you already do, not a general rule about bigger or smaller being better.

Lanthanated vs the red tip

The two 1/16 in listings share the blue 2% lanthanated composition, with the YESWELDER listing stating ease of striking an arc and lower amperage required, plus AC and DC suitability. The 3/32 in listing is the red tip WT20/EWTh-2, with a continuous stable arc and thermostability stated. Our lanthanated vs thoriated tungsten guide explains the two families; the Midwest listing states a free materials safety data sheet is linked.

Packaging and conformance

The YESWELDER 1/16 states vacuum packing with no oxidation; the YESWELDER 3/32 states a high-strength sealed aluminum tube with a dual-open design. The Midwest listing states no packaging detail but links a materials safety data sheet and a certificate of conformance. All three state AWS A5.12 conformance: the Midwest at A5.12M/A5.12:2036, the two YESWELDER listings at A5.12M/A5.12:2009.

Reading the listings: composition, conformance and packaging

What the colors mean

The blue tip marks 2% lanthanated tungsten, WL20/EWLa-2, on both 1/16 listings here. The red tip marks 2% thoriated tungsten, WT20/EWTh-2, on the 3/32 listing. The YESWELDER listings explain the practical split: lanthanated electrodes strike an arc with relative ease at lower amperage and perform well in both AC and DC applications, while the red tip listing describes a traditional electrode whose arc is continuous and stable without spreading. The Midwest listing names the alloys the lanthanated side covers: aluminum, magnesium, nickel, copper and titanium alloys, plus low-alloyed and non-corroding steels. Color coding is the shop shorthand; the composition code printed on the electrode is the authority.

Conformance claims, read closely

All three listings claim AWS conformance, but read the numbers. Both YESWELDER listings state AWS A5.12M/A5.12:2009 conformance. The Midwest listing prints A5.12M/A5.12:2036, so the two makers disagree on the revision year; verify against the certificate of conformance the Midwest listing links before treating either number as gospel. That same listing also offers a free materials safety data sheet. Composition affects arc behavior, so a certificate you can actually open is worth more than a badge on the page.

Packaging tells a story

Both YESWELDER 10-packs are vacuum packed against oxidation. The red 3/32 pack adds a high-strength sealed aluminum tube with a dual-open design the listing calls drop-resistant and pocket-ready, an upgrade from the plastic case the maker used before. The Midwest pack keeps it simpler and links a certificate of conformance and an MSDS instead, and notes US-based manufacturing with staff who help pick the right tungsten. For a home shop drawer, the sealed tube is the nicer package; for a buyer who wants documentation with the electrodes, the Midwest listing is the one that names it.

Weights and the physical feel

The YESWELDER 1/16 10-pack weighs 3.52 ounces; the 3/32 10-pack weighs 6.7 ounces, nearly twice the tungsten for the same count. That tracks the diameters: the part numbers encode the metric sizes as WL20-1.6 and WT20-2.4, i.e. 1.6 mm and 2.4 mm, matching the 1/16 and 3/32 inch labels. Package dimensions differ too: 8.86 by 1.14 by 0.67 inches for the blue 1/16 pack against 8.11 by 2.32 by 0.28 inches for the red 3/32 pack. Both YESWELDER listings show a first-listed date of December 17, 2018, so these are long-running listings with years of buyer history behind them.

FAQ for welders

Which listing is 3/32 in?

The YESWELDER red tip WT20/EWTh-2 at 3/32 in by 7 in; the other two listings are 1/16 in.

What does the blue band mean here?

On these listings the blue band marks 2% lanthanated, WL20/EWLa-2. See our tungsten color guide for aluminum.

Do any state a warranty?

No. None of the three listings states a warranty term.

Which states an electrode length?

Both YESWELDER listings state 7 in; the Midwest listing states no length.

Related: our ceriated vs lanthanated tungsten guide and the tungsten color guide for steel.

Scoring, line by line

All three are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None states a warranty, so the warranty weight scores zero across the board; the Midwest edges ahead on stated documentation, the YESWELDER 1/16 on stated length and packing.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Midwest 1/16 Blue 10-Pack 9.6 29 21 21 n/a 0
YESWELDER 1/16 Blue 10-Pack 9.6 29 21 21 n/a 0
YESWELDER 3/32 Red 10-Pack 9.6 28 21 21 n/a 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Where safety does not apply (unpowered gear with no listed safety features), it is left out and the remaining 90 points make up the score.

Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close. Sharpen tungsten only with a grinder reserved for it; see our tungsten sharpening guide.

More buying guides

Welding Consumables ·

Tungsten Electrode Size Chart

Tungsten electrode size comes down to diameter and blend: this guide covers the 3/32 inch and 1/8 inch electrodes, color codes and pack sizes…