Tungsten Electrode Types for TIG Welding
Red electrodes for DC work and a purple rare earth blend for AC and DC, and this guide matches each type to the job.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Midwest Tungsten Service Purple 3/32" TIG Tungsten9.7/10View on Amazon - 2
Arc-Zone Amplify Tungsten Electrode for TIG9.6/10View on Amazon - 3
YESWELDER TIG Welding Tungsten Electrode Red Tip9.6/10View on Amazon - 4
ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack9.5/10View on Amazon
A TIG torch with the wrong tungsten makes the arc wander, the tip ball up, and the bead go gray before the joint is even warm. The fix starts before striking an arc, with the electrode in the collet. Tungsten electrode types differ by the color band on the end, and that band tells which current and which metals the electrode suits. This guide explains the red and purple types in the listings below, the diameters on offer, and how to match an electrode to the work on the bench.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Midwest Tungsten Service Purple 3/32" TIG Tungsten
A purple rare earth blend electrode in a 10-pack, stated for AC and DC work across aluminum, magnesium, titanium, nickel, copper, low-alloyed steel and non-corrosive steel.
Pros
- Stated for both AC and DC, the widest current range here
- Names aluminum, magnesium, titanium, nickel, copper, low-alloyed steel and non-corrosive steel
- United States manufacturing, with staff to help pick a tungsten
- Free materials safety data sheet and certificate of conformance linked in the listing
Cons
- No warranty term is stated in the listing
- Diameter is 3/32 inch only in this listing
- Spec table dimensions do not read as an electrode length, so length is not stated in a usable form
- Rare earth blend composition is not broken down by element in the listing

Arc-Zone Amplify Tungsten Electrode for TIG
A 2% thoriated red electrode, 3/32 inch by 7 inch in a 10-pack, stated for DC work on copper, nickel, titanium and non-corrosive steel.
Pros
- Meets or exceeds ISO 6848 and AWS A5.12 standards, per the listing
- Formulated for longer electrode tip life and superior arc stability, per the maker
- Stated for DC applications on copper, nickel, titanium and non-corrosive steel
- 10-pack, 3/32 inch by 7 inch (175 mm)
Cons
- DC only as stated, so no AC work in the listing
- No warranty term is stated in the listing
- No packaging detail is stated
- Diameter is 3/32 inch only in this listing

YESWELDER TIG Welding Tungsten Electrode Red Tip
A red tip 2% thoriated electrode, 1/16 inch by 7 inch in a 10-pack, shipped in a sealed aluminum tube with a dual-open design.
Pros
- Sealed aluminum tube packaging, stated to prevent electrode oxidation
- Dual-open design for easy access to all electrode lengths
- Drop-resistant and portable build, per the listing
- States AWS A5.12M/A5.12:2009 conformance
Cons
- Diameter is 1/16 inch only in this listing
- No warranty term is stated in the listing
- No metals list is stated, so the listing does not name which alloys it suits
- Current type is not stated in the listing

ARCCAPTAIN TIG Welding Tungsten Electrode 10-Pack
A red 2% thoriated electrode, 1/8 inch by 7 inch in a 10-pack, stated for DC work on copper, nickel, titanium and stainless steel.
Pros
- States AWS A5.12M/A5.12:2009 and DIN EN 26848, GB/T 31908-201
- Vacuum packing, stated to prevent oxidation in storage
- Stated for DC applications on copper, nickel, titanium and stainless steel
- Maker claims resistance to thermal shock with fast arc striking and a low burn off rate
Cons
- No warranty term is stated in the listing
- Diameter is 1/8 inch only in this listing
Tungsten Electrode Types and What They Do
Every electrode here carries a color band, and the band names the type. Red marks a 2% thoriated electrode, sold as WT20 or EWTh-2 in the Arc-Zone and YESWELDER listings; the ARCCAPTAIN title says WT20/EWth-2 while its bullet says WL20/EWLa-2, so that listing’s type code is not settled. Purple marks a rare earth blend, sold as EWG, and the listing states it for AC and DC. That split is the decision in these listings: the ARCCAPTAIN and Arc-Zone red listings state DC use, while the purple blend is the only listing here that states both AC and DC. Match the listing’s own metals list to the joint, since the purple blend also names copper, nickel and titanium among its metals, and only the ARCCAPTAIN listing names stainless steel.
Diameter is the other choice, and the listings here offer 1/16 inch, 3/32 inch and 1/8 inch, each in a 10-pack. Match the diameter to the joint and the torch setup, and check the machine manual or door chart for settings before striking an arc. Where a listing does not state a length or a current type, pick a listing that states the detail the job needs rather than guessing.
Side by Side
| Gear Score | Diameter | Type | Stated Use | |
|---|---|---|---|---|
| Midwest Tungsten Purple 3/32 | 9.7/10 | 3/32 in | Rare earth blend (EWG) | AC and DC, aluminum to non-corrosive steel |
| Arc-Zone Amplify 3/32 | 9.6/10 | 3/32 in | 2% thoriated (EWTh-2) | DC, copper, nickel, titanium, non-corrosive steel |
| YESWELDER Red 1/16 | 9.6/10 | 1/16 in | 2% thoriated (WT20) | Current not stated, red tip |
| ARCCAPTAIN Red 1/8 | 9.5/10 | 1/8 in | 2% thoriated (WT20) | DC, copper, nickel, titanium, stainless steel |
Each electrode here states a welding standard in the listing. The ARCCAPTAIN and YESWELDER listings state AWS A5.12M/A5.12:2009, the Midwest listing states AWS A5.12M/A5.12:2036, and the Arc-Zone listing states ISO 6848 and AWS A5.12. A stated standard does not settle fit on its own: check the diameter, the current type and the metals list against the job before ordering.
Tungsten Electrodes for the TIG Torch
The electrodes below are the stock that puts the types above into the torch: red electrodes for DC work where the listing states it, purple rare earth for AC and DC, in the diameters the listings state.
How to Pick a Diameter and Type
Start from the current type. When the job is DC only, the ARCCAPTAIN and Arc-Zone listings state the metals they suit, so match the metals list to the joint; the YESWELDER listing states no metals list and no current type. When the job needs AC as well, the purple blend is the only listing here that states both, so it is the pick for that work.
Then take the diameter the torch setup calls for. The listings state 1/16 inch, 3/32 inch and 1/8 inch, and each electrode here comes in one diameter, so order the listing that states the size the collet and the joint need. When a listing leaves a detail blank, such as the Midwest length or the YESWELDER current type, treat it as not stated and pick a listing that states it.
- Check the color band on arrival. Red marks the thoriated type in the Arc-Zone and YESWELDER listings and purple marks the rare earth blend in the Midwest listing, so a band that does not match the listing is a reason to stop and check the order. The ARCCAPTAIN bullet names WL20/EWLa-2 while its title says WT20/EWth-2, so check that listing’s code against the order too.
- Check the pack count. Each listing states a 10-pack in its title and bullets, so count the electrodes against the listing before the first weld. The ARCCAPTAIN spec table reads NumberOfItems 1, so count that pack with care.
- Check the standard on the listing. Each electrode here states an AWS or ISO standard, so confirm the standard named matches the listing ordered.
- Keep the packing. The ARCCAPTAIN listing states vacuum packing and the YESWELDER listing states a sealed aluminum tube, both stated to prevent oxidation, so leave those electrodes in the packing they arrived in until use.
For more options, see our welding consumables guides.
FAQ for welders
What does the red band on a tungsten electrode mean?
In these listings, red marks a 2% thoriated electrode, sold as WT20 or EWTh-2 in the Arc-Zone and YESWELDER listings; the ARCCAPTAIN title says WT20/EWth-2 while its bullet says WL20/EWLa-2. The ARCCAPTAIN and Arc-Zone listings state the red type for DC applications. The ARCCAPTAIN listing names copper, nickel, titanium and stainless steel, and the Arc-Zone listing names copper, nickel, titanium and non-corrosive steel, while the YESWELDER listing names no metals. Check the listing for the metals list before ordering, since the YESWELDER listing names none.
Can one tungsten electrode handle AC and DC?
The purple rare earth blend listing here states both AC and DC, and names aluminum, magnesium, titanium, nickel, copper, low-alloyed steel and non-corrosive steel. The ARCCAPTAIN and Arc-Zone red listings state DC applications, while the YESWELDER listing states no current type. When a job needs AC, pick a listing that states AC in writing.
What tungsten electrode diameters do these listings offer?
The listings here offer 1/16 inch, 3/32 inch and 1/8 inch, each in a 10-pack. Each electrode comes in one diameter, so order the listing that states the size the torch setup needs. Check the machine manual or door chart for settings that suit the diameter.
How long is a tungsten electrode?
The ARCCAPTAIN, YESWELDER and Arc-Zone listings state a 7 inch length, or 175 mm where the listing gives both. The Midwest listing does not state a length in a usable form. Confirm the length in the listing before ordering when it matters to the torch setup.
How many tungsten electrodes come in a pack?
Each listing states a 10-pack in its title and bullets. Count the electrodes against the listing on arrival, and keep them in the packing they arrived in; the ARCCAPTAIN listing states vacuum packing and the YESWELDER listing states a sealed aluminum tube, both stated to prevent oxidation.
Related: TIG welder tungsten tips, TIG welding gas types, parts of a TIG welder, and TIG welding aluminum problems.




