Portable Laser Welding Machine Price Guide
A portable laser welding machine price follows laser power, weld and cut depth, cleaning width, presets and safety features, and this guide works through each part with the figures the makers publish.

On this page
A cracked bracket on a trailer, a stainless panel that needs a clean seam, a small repair that has to look right when it is done. A portable laser welder promises a neat bead with little cleanup, and the first question most buyers ask is the portable laser welding machine price. There is no single figure, because the price follows the laser power, the weld and cut depth, the extra functions built into the machine, and the support that comes with it. This guide to portable laser welding machine price works through each part, using the figures the makers publish, so you can see what the money buys.
As an Amazon Associate I earn from qualifying purchases. This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
What sets a portable laser welding machine price
Start with laser power. The two 3-in-1 models covered here run at 800W and 1200W, and power is the first split in the range. Both state welds up to 5 mm in stainless steel and carbon steel, and both cut metal up to 5 mm, so power alone does not explain the whole gap. The rest of the price sits in what the machine does besides welding, and in the controls and safety system around the beam.
Side by side
| 800W MetalFab | 1200W MetalFab | What it means for price | |
|---|---|---|---|
| Laser power | 800W | 1200W | More power costs more |
| Welds stainless and carbon steel up to | 5 mm | 5 mm | Same stated depth on both models |
| Cuts metal up to | 5 mm | 5 mm | Cutting adds to the price |
| Laser cleaner width | 45 mm | 45 mm | Cleaning adds to the price |
| Material presets | 108+ | 108+ | Presets add to the price |
| Touchscreen | 8 inch | 8 inch | A screen adds to the price |
| Stated lifespan | Over 10,000 hours | Over 10,000 hours | Long life adds to the price |
| Weight | 106.04 pounds | Not stated | Size and weight add to shipping cost |
The table shows why two machines with the same stated weld depth can still sit at different prices. Power is the first split, and the cleaning width, preset count and screen make up the rest. The maker lists a weight of 106.04 pounds for the 800W model and no weight for the 1200W model, so check the weight before you plan transport.
What the power rating buys you
Laser power affects how fast the beam melts metal. The maker states weld quality comparable to TIG and MIG systems, at 4 to 8 times the speed of TIG, with a small heat-affected zone that keeps thin metal from warping. The 1200W model carries more power than the 800W model, and the maker states it as a Class 4 laser. The stated weld depth stays at 5 mm for both models, so do not assume the extra power welds deeper on these two.
The 3-in-1 functions and what they add
A 3-in-1 machine welds, cuts and cleans. The cutter handles metal up to 5 mm, and the cleaner covers a 45 mm width for surface prep. Each extra function adds parts, software and cost, so a weld-only machine of the same power usually sits below a 3-in-1 model. The controls add to the price too. Both models carry an 8 inch touchscreen with 108+ pre-loaded material parameters, and the system feeds wire on its own once you pick the material and thickness. The maker states a lifespan of over 10,000 hours and round-the-clock operation, which matters in a busy shop.
What to check before you buy
- Match power to the metal. Both models state welds up to 5 mm in stainless and carbon steel. If your work runs thicker, look for a higher power class before you buy.
- Count the functions. Welding, cutting up to 5 mm and cleaning across 45 mm are three machines in one here. If you only weld, a weld-only machine may cost less.
- Check the controls. An 8 inch touchscreen with 108+ presets and automatic wire feeding cuts setup time, and it matters more if you change materials often.
- Check size and weight. The 800W model measures 24.89 inches by 12.05 inches by 18.58 inches and weighs 106.04 pounds. Make sure it fits the bench and the vehicle you carry it in.
- Check the support. The maker offers US and EU based support and a free 1-on-1 machine commissioning session. Know who answers when the machine stops working.
For a different process at a lower power, see the laser welder vs cold welder comparison, and for a sense of how another cutting tool is priced, the cost of a plasma cutter guide.
Laser safety. The maker states the 1200W model is a Class 4 laser device, and the beam can damage eyes and skin in an instant. Use eye protection rated for the laser, keep the beam off skin, and weld with ventilation or outdoors with your head out of the fumes. The contact-activated safety system is a backup, not a substitute for protection, and the manual of your model gives the safety steps for your setup. See the OSHA welding overview.
FAQ for welders
How much does a portable laser welding machine cost?
No single figure covers every machine. The price follows the laser power, the weld and cut depth, whether the machine also cuts and cleans, and the presets, screen and safety system. Compare machines with the same power and functions before you judge one as dear or cheap.
Is an 800W laser welder enough for stainless steel?
The maker states the 800W MetalFab welds stainless steel and carbon steel up to 5 mm. Thicker plate needs a different setup, and the manual of your machine gives the settings for your joint.
Can a portable laser welder cut metal too?
Some can. The 3-in-1 MetalFab models cut metal up to 5 mm and clean with a 45 mm wide laser, besides welding. A weld-only machine is not set up to cut, so check the functions the maker states before you buy.
Do laser welders need presets?
They help. The MetalFab models carry 108+ pre-loaded material parameters on an 8 inch touchscreen, and the system feeds wire on its own once you pick the material and thickness. Presets do not replace fit-up and clean metal, but they cut the setup time for common joints.
What safety gear does a laser welder need?
Treat it as a Class 4 laser. Use eye protection rated for the laser, keep the beam off skin, and weld with ventilation or outdoors with your head out of the fumes. The contact-activated safety system stops the beam when the head leaves the work, but it is a backup, not a substitute for protection.
Related: best handheld laser welder cost, laser welder vs cold welder, laser cleaning machine vs sandblaster, and the welders hub. Also see our cost of a plasma cutter.




