Best Retractable Welding Hose Reel (2026)
Four retractable welding hose reels, compared on hose length, working pressure, rewind, mounting and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 100 Ft Reel9.6/10View on Amazon - 2
Best Cold WeatherAMZOSS 100 Ft Reel9.6/10View on Amazon - 3
Best BuiltCoxreels 112WL-1-1009.4/10View on Amazon - 4
Best Short ReachStark USA 50 Ft Reel9.4/10View on Amazon
The torch hose snakes across the shop floor, under the bench, around the leg of the welding table, and every step risks a kink or a trip. A reel on the wall pulls it up and out of the way, then winds it back when the bead is done. This guide compares the best retractable welding hose reel picks on what each listing states: hose length and pressure, rewind, mounting and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall VEVOR 100 Ft Reel: 100 ft of 1/4 in twin hose included, 300 PSI working pressure, auto-rewind and a steel powder-coated housing. Check price on Amazon
- Best Cold Weather AMZOSS 100 Ft Reel: 100 ft twin hose rated from minus 40 to 140 degrees Fahrenheit, auto-rewind with a lead-in hose included. Check price on Amazon
- Best Built Coxreels 112WL-1-100: Made in the USA steel reel with a brass swivel and Viton seals, tension brake and a 2 year warranty; hose not included. Check price on Amazon
- Best Short Reach Stark USA 50 Ft Reel: 50 ft twin hose with auto-rewind and multi-position locking, 300 PSI working pressure. Check price on Amazon
The machines

VEVOR Retractable Welding Hose Reel
A 100 ft twin oxygen-acetylene hose reel with auto-rewind, 300 PSI working pressure, a steel powder-coated housing and ceiling, wall or floor mounting.
Pros
- 100 ft of 1/4 in twin hose included, R grade, 300 PSI working pressure
- 900 PSI burst pressure stated, the highest here
- Auto-rewind with an adjustable stopper and non-snag rollers
- Steel housing with a powder-coated finish, mounts on ceiling, wall or floor
Cons
- 59.1 lb, the heaviest reel here
- No warranty term stated
- No stated temperature range
- No lead-in hose stated

Welding Hose Reel Retractable 1/4 Inch x 100 Foot
A 100 ft twin oxygen-acetylene hose reel with auto-rewind ratchet locking, a 200 PSI rating, a hose that works from minus 40 to 140 degrees Fahrenheit, and a lead-in hose included.
Pros
- 100 ft of 1/4 in twin hose included, with a lead-in hose
- Hose works from minus 40 to 140 degrees Fahrenheit, per the listing
- Dual brass swivel joint protects against leaks, per the listing
- Fully enclosed multiposition release ratchet spring locking
Cons
- 200 PSI working pressure, lower than the 300 PSI reels
- No warranty term stated
- Grade R hose is for acetylene use only, per the listing
- No burst pressure stated

Coxreels 112WL-1-100 Hand Crank Steel Welding Hose
A made in the USA hand crank steel hose reel that holds 100 ft of 1/4 in hose, not included, with a brass swivel, a tension brake and a limited 2 year warranty.
Pros
- Made in the USA, with a limited 2 year manufacturer's warranty
- Dual-ported solid brass full-flow swivel with Viton seals
- Adjustable tension brake stops the reel free-wheeling
- 16.5 lb, the smallest weight here
Cons
- Hose not included: 100 ft of 1/4 in hose must be bought separately
- Hand crank, not auto-rewind
- 200 PSI rating, lower than the 300 PSI reels
- No stated temperature range

Stark USA Welding Hose Reel 50' ft x 1/4" Hose
A 50 ft twin oxygen-acetylene hose reel with auto-rewind and multi-position locking, 300 PSI working pressure, brass fittings and wall, ceiling, floor or workbench mounting.
Pros
- 50 ft of 1/4 in twin hose included, 300 PSI working pressure
- Auto-rewind with a multi-position locking system
- Solid brass fittings, 9/16 in female UNF and 1/4 in MNPT
- Mounts on a wall, ceiling, floor or workbench
Cons
- 50 ft is the smallest hose length here
- No warranty term stated
- No stated temperature range
- No burst pressure stated
Other welders and gear to compare
Goodyear Portable Air Hose Reel Cart with 3/8" x 100 ftCheck price on Amazon
AIRZILLA Premium Steel Retractable Air Hose Reel With Dual ArmCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Hose | Working pressure | Rewind | Mount | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| VEVOR 100 Ft Reel | 9.6/10 | 1/4 in x 100 ft, included | 300 PSI (900 burst) | Auto-rewind | Ceiling, wall, floor | 59.1 lb | Not stated |
| AMZOSS 100 Ft Reel | 9.6/10 | 1/4 in x 100 ft, included | 200 PSI | Auto-rewind, ratchet lock | Wall | 51.7 lb | Not stated |
| Coxreels 112WL-1-100 | 9.4/10 | 1/4 in x 100 ft, not included | 200 PSI | Hand crank | Wall | 16.5 lb | 2 years |
| Stark USA 50 Ft Reel | 9.4/10 | 1/4 in x 50 ft, included | 300 PSI | Auto-rewind | Wall, ceiling, floor, bench | 43.8 lb | Not stated |
Treat the specs as maker ratings pulled straight from the listings; we gathered them on 25 October 2026.
Buying guide: choosing the best retractable welding hose reel
Hose length
Length is reach: the hose must stretch from the reel to the work. Two reels here include 100 ft of twin hose, the Stark includes 50 ft, and the Coxreels holds 100 ft of hose that is not included, so add it to the order. Check the length against the far corner of your shop before ordering.
Working pressure
Working pressure is the pressure the hose is rated for in use. The VEVOR and Stark hoses state 300 PSI working pressure, and the VEVOR adds a 900 PSI burst pressure. The Coxreels and AMZOSS state 200 PSI. Match the rating to the regulators on your torch set.
Rewind
Auto-rewind reels pull the hose back with a spring: give the hose a pull and it retracts, and a stopper or lock holds it at the length you want. The VEVOR, Stark and AMZOSS reels are automatic, while the Coxreels is a hand crank with a tension brake that stops free-wheeling. A hand crank suits a reel that stays put; auto-rewind suits a reel you use all day.
Mounting
Mounting decides where the reel lives. The VEVOR mounts on a ceiling, wall or floor, the Stark on a wall, ceiling, floor or workbench, and the AMZOSS and Coxreels on a wall. The VEVOR ships with 4 expansion bolts; check the mount against your wall or ceiling before ordering.
Fittings
Fittings decide whether the hose hooks straight to your torch. The VEVOR uses dedicated B fittings, the Stark uses 9/16 in female UNF fittings with a 1/4 in MNPT connection, and the AMZOSS uses 9/16 in female UNF brass fittings with a 1/4 in MNPT connection. The Coxreels has a dual-ported solid brass full-flow swivel with Viton seals. Check the fittings against your torch set before ordering.
Use as directed. Keep gas hoses off the floor where hot slag lands, and check fittings for leaks before lighting the torch. Never exceed the stated working pressure: 300 PSI on the VEVOR and Stark hoses, 200 PSI on the Coxreels and AMZOSS. See the OSHA welding overview and our Safety Disclaimer.
Before You Strike an Arc
- Check the fittings before the first job: B fittings on the VEVOR, 9/16 in female UNF on the Stark and AMZOSS, and a brass swivel on the Coxreels.
- Mount the reel where the hose reaches the work: 100 ft on three reels here, 50 ft on the Stark.
- Order hose with the Coxreels: the listing states the hose is not included.
- Check the working pressure against your regulators: 300 PSI on the VEVOR and Stark, 200 PSI on the Coxreels and AMZOSS.
- Wear protection when cutting and grinding near the reel, and keep the hose off the floor where hot slag lands.
FAQ for welders
What is a welding hose reel?
A welding hose reel holds the twin oxygen and acetylene hoses on a drum, so they stay off the floor and unwind only as far as the work needs. The reels here mount on a wall, ceiling, floor or workbench, and the hose winds back by spring or by hand crank. A reel keeps the hose from kinking and tripping the welder.
How long should a welding hose be?
The reels here hold 100 ft of hose, except the Stark at 50 ft. A longer hose reaches across the shop; a shorter hose is easier to wind back. Measure the far corner of your shop before ordering.
What pressure can a welding hose reel handle?
The hose rating decides it, not the reel: 300 PSI working pressure on the VEVOR and Stark hoses, 200 PSI on the Coxreels and AMZOSS. The VEVOR hose also states a 900 PSI burst pressure. Never exceed the stated working pressure.
Does the Coxreels reel include a hose?
No. The listing states the reel holds 100 ft of 1/4 in hose, not included, so you buy the hose separately. The other three reels here include the twin hose. Check the included components before ordering.
Can I mount a hose reel on the ceiling?
The VEVOR mounts on a ceiling, wall or floor, and the Stark on a wall, ceiling, floor or workbench. The AMZOSS and Coxreels mount on a wall only, per the listings. The VEVOR ships with 4 expansion bolts for mounting.
Related: best welding gas hose, best oxy acetylene torch kit for home shop, best acetylene regulator for torch, and the welders hub. Also see our oxy acetylene vs tig welder. Also see our best gloves for oxy-fuel welding.
Scoring, line by line
Each reel is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. No listing here states a safety standard or a warranty term except the Coxreels, so warranty points go only to that reel, and safety points go to stated safety features: a tension brake, a hose stopper, a locking mechanism or a swivel that protects against leaks.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 100 Ft Reel | 9.6 | 32 | 22 | 21 | 5 | 0 |
| AMZOSS 100 Ft Reel | 9.6 | 30 | 21 | 20 | 7 | 0 |
| Coxreels 112WL-1-100 | 9.4 | 23 | 21 | 15 | 7 | 3 |
| Stark USA 50 Ft Reel | 9.4 | 28 | 20 | 19 | 5 | 0 |
Think of 9.2 as the bottom and 9.8 as the top. Totals are placed between them in proportion, which keeps the order intact: more points, higher score.




