Best 190 Mm Air Chipping Hammer Kit (2026): 5 Kits Compared
Five air chipping hammer kits compared by blows per minute, stroke length, chisel count and warranty, for slag chipping, spot weld removal and auto body work.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallIngersoll Rand 123MAXK9.7/10View on Amazon - 2
Highest BPMweyleity 150mm9.7/10View on Amazon - 3
Most PiecesKuntech 27PCS9.6/10View on Amazon - 4
Lowest WeightNATGAI 150mm9.6/10View on Amazon
Slag sticks to the bead, a spot weld holds panels together, and a rusted exhaust bolt will not move. The best 190 mm air chipping hammer kit puts a chisel on the end of an air hammer and lets compressed air do the striking, for slag removal, spot weld work and body repair. This guide compares kits on what each listing states: blows per minute, stroke, chisel count and warranty.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Ingersoll Rand 123MAXK: 3,530 BPM with a 2 5/8 inch stroke, a 5-piece chisel set and the only 1 year warranty here. Check price on Amazon
- Highest BPM weyleity 150mm: 4,500 BPM, tied with the NATGAI for the highest rate here, a 150 mm stroke, 4 chisels and a 6 month warranty. Check price on Amazon
- Most Pieces Kuntech 27PCS: A 27-piece kit with a carrying case and gloves, at 2,500 BPM. Check price on Amazon
- Lowest Weight NATGAI 150mm: 2.8 lb with a 150 mm stroke, 4,500 BPM and 4 chisels. Check price on Amazon
The machines

Ingersoll Rand 123MAXK 2 5/8" Stroke Air Hammer
A 3,530 BPM air hammer kit with a 2 5/8 inch stroke, a quick-change retainer and a 5-piece chisel set, with the only 1 year warranty here.
Pros
- 3,530 BPM and a 2 5/8 inch stroke for exhaust and front-end work
- 5-piece chisel set with a quick-change retainer for fast swaps
- Anti-vibration system and anti-slip grip for long jobs
- 1 year limited warranty in the listing
Cons
- No air compressor included, per the listing
- Heavier than the NATGAI at 2.8 lb
- No carrying case stated
- No air consumption figure in the listing

weyleity 150mm Air Hammer Kit 4 Chisels 4500 BPM
A 150 mm short barrel air hammer kit at 4,500 BPM with 4 heat-treated chisels, a quick-change spring retainer and a 6 month warranty.
Pros
- 4,500 BPM, tied for the highest rate here
- 4 heat-treated chisels: taper punch, flat chisel, panel cutter, spot weld chisel
- Spring retainer for fast chisel changes, 1/4 inch NPT inlet
- 6 month warranty in the listing
Cons
- No weight stated
- No carrying case stated
- No air consumption figure in the listing
- 6 month warranty, shorter than the 1 year term on the Ingersoll Rand

NATGAI 150mm Air Hammer Kit 4500 BPM Air Hammer
A 150 mm air hammer kit at 4,500 BPM with 4 hardened carbon steel chisels, an aluminum alloy body and a 1/4 inch NPT inlet.
Pros
- 4,500 BPM with a 150 mm stroke, tied for the highest rate here
- 4 chisels with stated sizes, 4.9 by 0.78 inches each
- Aluminum alloy body with hardened carbon steel chisels
- 2.8 lb, the lowest stated weight here
Cons
- No warranty term in the listing
- No carrying case stated
- No air consumption figure in the listing

27PCS Air Hammer Kit, Pneumatic Hammers 2500 BPM
A 27-piece air hammer kit at 2,500 BPM with a carrying case and gloves, a one-button start and a self-locking buckle for chisel changes.
Pros
- 27-piece kit with a carrying case and gloves
- One-button start with a self-locking buckle for fast chisel changes
- Shock reduction, anti-slip grip and swivel air inlet
- Front-end exhaust method to dissipate heat
Cons
- 2,500 BPM, the lowest stated rate here
- No stroke length stated
- No weight stated
- No warranty term in the listing

Anndason 5 Pcs Smoothing Pneumatic Air Hammer
Four alloy steel hammer bits and a spring that fit 150, 190 and 250 mm air hammers, with no hammer included.
Pros
- Fits 150, 190 and 250 mm guns, the only bits here for a 190 mm gun
- Alloy steel bits, 3 flat and 1 spherical
- Handle diameter about 10 mm, stated
- Bit lengths stated: 180, 100, 83 and 83 mm
Cons
- No hammer included, bits only
- No BPM or stroke stated, since there is no hammer
- No warranty term in the listing
- Listing text is thin and partly unclear
Other welders and gear to compare
13-Piece Air Hammer KitCheck price on Amazon
DYNAMIC POWER Short Barrel Air Hammer Kit with 4-ChiselsCheck price on Amazon
PROSHI 150mm Air Hammer KitCheck price on Amazon
Ingersoll Rand 115K Standard Duty Pneumatic Hammer KitCheck price on Amazon
UW-AH150 Short Barrel Air Hammer Kit with Quick ChangeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | BPM | Stroke | Chisels | Case | Warranty |
|---|---|---|---|---|---|---|
| Ingersoll Rand 123MAXK | 9.7/10 | 3,530 | 2 5/8 in | 5 | Not stated | 1 year |
| weyleity 150mm | 9.7/10 | 4,500 | 150 mm | 4 | Not stated | 6 months |
| NATGAI 150mm | 9.6/10 | 4,500 | 150 mm | 4 | Not stated | None stated |
| Kuntech 27PCS | 9.6/10 | 2,500 | Not stated | 27-piece set | Carrying case | None stated |
| Anndason Bits Kit | 9.2/10 | Not stated | Fits 150, 190, 250 mm guns | 4 bits | Not stated | None stated |
All specs here repeat what the maker rates and the listing prints, copied down 10 November 2026.
Buying guide: the best 190 mm air chipping hammer kit
Blows per minute
BPM is the headline number here, and it runs from 2,500 on the Kuntech to 4,500 on the NATGAI and weyleity kits, with the Ingersoll Rand at 3,530. A higher rate suits fast chipping and cutting, but the stroke and the chisel matter as much as the rate. The Anndason set states no BPM, since it is bits only.
Stroke length
Stroke is the length of each blow. The NATGAI and weyleity kits state a 150 mm stroke, and the Ingersoll Rand states a 2 5/8 inch stroke. The Kuntech listing states no stroke length. The Anndason bits fit 150, 190 and 250 mm guns, so they suit a 190 mm gun even though no hammer here states a 190 mm stroke.
Chisels in the kit
Count the chisels and check the shapes. The Ingersoll Rand kit includes a 5-piece chisel set, and the NATGAI and weyleity kits include 4 chisels each, taper punch, panel cutter, flat chisel and spot weld chisel. The Kuntech kit includes 27 pieces with pressure plates, adapter sleeves and chisels. The Anndason set is 4 bits and a spring, no hammer.
Air supply and fittings
Every hammer here needs an air compressor, and the Ingersoll Rand listing states the tool does not include one. The NATGAI and weyleity kits use a standard 1/4 inch NPT air inlet, which the listings state connects to most air compressors. Check the inlet size and the compressor against the hammer before you buy.
Comfort and control
Chipping hammers shake, so grip and vibration matter on long jobs. The Ingersoll Rand lists an anti-vibration system and an anti-slip grip, the Kuntech lists shock reduction with an anti-slip grip, and the weyleity lists an anti-slip handle with an ergonomic trigger. Both the Ingersoll Rand and Kuntech list a swivel inlet, which keeps the hose from twisting.
Use as directed. Wear eye and hearing protection when running an air hammer, keep hands clear of the chisel, and keep the work area clear of anything that can burn, since chipping throws hot scale and sparks. Disconnect the air supply before changing chisels.
Before You Strike an Arc
- Check the air inlet on arrival: the NATGAI and weyleity kits state a 1/4 inch NPT inlet, so confirm the fitting matches the shop air hose.
- Confirm the chisel count on arrival: the Ingersoll Rand kit states a 5-piece chisel set, and the NATGAI spec table lists 7 items while the bullets list 4 chisels.
- Have an air compressor ready: the Ingersoll Rand listing states the tool does not include one, and the Anndason bits need a 150, 190 or 250 mm gun to fit.
- Check the carrying case and gloves on the Kuntech kit, since they are part of the 27-piece set.
FAQ for welders
What is a chipping hammer used for?
Chipping hammers remove slag from welds, break spot welds, cut and scrape metal, and chip rust and scale. The listings here also mention exhaust work, body panel separation, muffler work and demolition. The Anndason bits suit tire repair and wind pipe pressure seam edges, per that listing.
What does BPM mean on an air hammer?
BPM means blows per minute, how many strikes the hammer delivers in a minute. The kits here state up to 2,500, 3,530 and 4,500 BPM. A higher rate suits fast chipping, but stroke and chisel shape matter too.
Do I need an air compressor for an air chipping hammer?
Yes. These are pneumatic tools, and the Ingersoll Rand listing states the tool does not include an air compressor. The NATGAI and weyleity kits state a 1/4 inch NPT inlet that connects to most air compressors.
What chisels come with an air chipping hammer kit?
It depends on the kit. The Ingersoll Rand kit includes a 5-piece chisel set, and the NATGAI and weyleity kits include taper punch, panel cutter, flat chisel and spot weld chisel. The Kuntech kit includes 27 pieces with pressure plates, adapter sleeves and chisels.
Will these bits fit a 190 mm air hammer?
The Anndason bits fit 150, 190 and 250 mm guns, with a handle diameter of about 10 mm. No hammer in this guide states a 190 mm stroke: the NATGAI and weyleity kits state a 150 mm stroke, and the Ingersoll Rand states a 2 5/8 inch stroke.
Related: air hammer vs chipping hammer, what is a chipping hammer, best pneumatic air hammer, and the air chipping hammer kit set 190 mm welders hub.
Scoring, line by line
Each kit is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Air hammers have no electrical safety listing to state, so every kit here scores zero on that criterion; the ranking comes from the other four. A warranty scores only where the listing states a term.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Ingersoll Rand 123MAXK | 9.7 | 32 | 22 | 21 | n/a | 2 |
| weyleity 150mm | 9.7 | 30 | 21 | 21 | n/a | 1 |
| NATGAI 150mm | 9.6 | 30 | 21 | 21 | n/a | 0 |
| Kuntech 27PCS | 9.6 | 28 | 20 | 21 | n/a | 0 |
| Anndason Bits Kit | 9.2 | 18 | 15 | 16 | n/a | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




