Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lincoln Power Mig 180c vs Yeswelder Mig-205ds: Which One Should You Buy?

Neither listing here is the welder itself: the Lincoln side is a 100A replacement MIG gun and the YesWelder side is an electrode holder, and only the gun states amperage, wire size, duty cycle and cable length.

Lincoln Power Mig 180c vs Yeswelder Mig-205ds: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MULMART 15FT K530-6 MIG Welding Gun 100Amp WeldingMULMART 15FT K530-6 MIG Welding Gun 100Amp Welding9.2/10View on Amazon
  2. 2YESWELDER Electrode Holder with CableYESWELDER Electrode Holder with Cable9.2/10View on Amazon

Verdict. For lincoln power mig 180c vs yeswelder mig-205ds, neither listing here is the welder itself. The Lincoln side is a 15 ft, 100A replacement MIG gun with a stated wire range and duty cycle, while the YesWelder side is an electrode holder with a cable and almost no stated specs. Pick the Lincoln side if you need a replacement gun with stated numbers; pick the YesWelder side only if you need that exact holder for a MIG-205DS, MIG-205DS PRO or MIG-250PRO.

A cracked gun or a worn holder stops a weld halfway through a bead, and a home shop has no spare rack of torches to grab. When the repair is a Lincoln Power MIG 180C or a YesWelder MIG-205DS, the replacement part has to fit the machine on the bench. This comparison looks at lincoln power mig 180c vs yeswelder mig-205ds through the two listings at hand: a replacement MIG gun on the Lincoln side and an electrode holder on the YesWelder side.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The two listings

MULMART 15FT K530-6 MIG Welding Gun 100Amp Welding

MULMART 15FT K530-6 MIG Welding Gun 100Amp Welding

MULMART9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 15 ft, 100A replacement MIG gun for the Lincoln Magnum 100L, rated for .025-.045 in wire with a 40% duty cycle on CO2.

Pros

  • Rated 100A with CO2, with a 40% duty cycle stated
  • Takes .025-.045 in wire, or 0.6-1.2mm
  • 15 ft cable with an insulated metal jacket on the gun tube
  • Fits the Power MIG 140C and 180C, among other Lincoln machines

Cons

  • It is a replacement gun, not the Power MIG 180C welder
  • No warranty term is stated
  • No weight is stated
  • No contact tips or nozzles are named in the listing
YESWELDER Electrode Holder with Cable

YESWELDER Electrode Holder with Cable

YESWELDER9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An electrode holder with an included cable for the YesWelder MIG-205DS, MIG-205DS PRO and MIG-250PRO welders.

Pros

  • Made for the MIG-205DS, MIG-205DS PRO and MIG-250PRO
  • Cable is included
  • Straightforward replacement, per the listing
  • Holder and cable come in one listing

Cons

  • It is an electrode holder, not the MIG-205DS welder
  • No amperage is stated
  • No cable length is stated
  • No warranty term is stated

Side by side

MULMART K530-6 MIG Gun YESWELDER Electrode Holder
Gear Score 46 30
What it is Replacement MIG gun, 15 ft Electrode holder with cable
Fits Power MIG 140C/180C and more MIG-205DS, MIG-205DS PRO, MIG-250PRO
Rated amperage 100A CO2 Not stated
Wire diameter .025-.045 in Not stated
Duty cycle 40% with CO2 gas Not stated
Cable length 15 ft Not stated
Processes MIG, Pulsed MIG, Flux-Cored Not stated
Weight Not stated Not stated
Warranty Not stated Not stated

Ratings in this table are the makers’ own claims taken from each product page (8 November 2026). Neither listing states a CSA, UL or ETL listing, a warranty term or a weight.

Lincoln power mig 180c vs yeswelder mig-205ds: what each listing is

The Lincoln side is a MULMART K530-6 MIG welding gun, a 15 ft replacement torch rated at 100A with CO2, a replacement for the Lincoln Magnum 100L gun found on the Power MIG 140C and 180C, among other Lincoln machines. The YesWelder side is a YESWELDER electrode holder with a cable, made for the MIG-205DS, MIG-205DS PRO and MIG-250PRO welders. One listing is a gun with stated amperage, wire size and duty cycle; the other is a holder with a model number and a compatibility line. That gap shapes the whole comparison: the gun can be judged on stated numbers, the holder cannot.

Power and output

The gun is rated at 100A with CO2, on a 40% duty cycle with CO2 gas. The holder listing states no amperage at all, so there is no output comparison to make. Do not read the holder model number as an amperage figure: it is a model code, and the listing states no rated current for it. If you need a gun that states its limits, the Lincoln side is the only one that does.

Wire size and duty cycle

The gun takes .025-.045 in wire, or 0.6-1.2mm, and the listing pairs its 40% duty cycle with CO2 gas. The holder listing states no wire size and no duty cycle, so neither figure can be compared across the two sides. The listing lists MIG, pulsed MIG and flux core as the gun’s processes; see our flux core vs MIG guide for the difference. See our duty cycle explainer for what the figure means when a listing does state it.

Cable length and fit

The gun comes on a 15 ft cable, listed as 15-foot (4.6M), with an armored, electrically insulated metal jacket on the gun tube and an abrasion-resistant extruded rubber jacket on the cable. The holder listing says only that a cable is included, with no length stated. On fit, the gun lists the Lincoln machines it replaces the Magnum 100L on, including the Power MIG 140C and 180C. The holder lists the YesWelder MIG-205DS, MIG-205DS PRO and MIG-250PRO.

Warranty

Neither listing states a warranty term. The gun listing names no warranty, and the holder listing names none either. That leaves both sides equal here, with no written cover stated for either part.

Choose the Lincoln side if

  • You need a replacement MIG gun for a Lincoln Power MIG 140C or 180C, or another machine on its fitment list.
  • You want stated amperage, wire size and duty cycle before you buy.
  • You weld MIG, pulsed MIG or flux core and want a gun listed for all three.
  • A 15 ft cable suits your bench layout.

Choose the YesWelder side if

  • You need the exact electrode holder for a MIG-205DS, MIG-205DS PRO or MIG-250PRO.
  • The holder is the part you need, and the cable comes with it.
  • You accept a listing with almost no stated specs.
  • You are replacing a holder, not buying a welder.

Before You Strike an Arc

  • Check the gun fits your machine: the K530-6 replaces the Magnum 100L on the Lincoln machines its listing names, including the Power MIG 180C.
  • Check the holder fits your welder: it is listed for the MIG-205DS, MIG-205DS PRO and MIG-250PRO.
  • Match the wire to the gun: .025-.045 in, or 0.6-1.2mm, per the gun listing.
  • Check the cable on arrival: the gun lists a 15 ft cable, while the holder lists a cable with no length stated, so measure what arrives.

FAQ for welders

Does the Lincoln listing include the Power MIG 180C welder?

No. The Lincoln side listing is a MULMART K530-6 replacement MIG gun that fits the Power MIG 180C, not the welder itself. The YesWelder side listing is an electrode holder for the MIG-205DS, not that welder either.

What amperage is the replacement gun rated for?

The gun listing rates it at 100A with CO2, on a 40% duty cycle with CO2 gas. The holder listing states no amperage.

What wire sizes does the gun take?

The listing states .025-.045 in, or 0.6-1.2mm. The holder listing states no wire size.

Can the YesWelder holder fit the MIG-250PRO?

Yes, per the listing: it is made for the MIG-205DS, MIG-205DS PRO and MIG-250PRO welders.

Do either of these listings state a warranty?

No. Neither listing states a warranty term.

Related: best flux core welder, how to choose a MIG welder, and the MIG welders hub. Also see our flux core vs MIG guide.

Scoring, line by line

The Gear Score weighs performance, build, value, safety and warranty. A factor a listing does not state scores zero.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
MULMART K530-6 MIG Gun 9.2 21 18 18 0 0
YESWELDER Electrode Holder 9.2 12 12 12 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides