Tig vs Stick for Home Garage: Which One Should You Buy?
A complete stick welder against TIG torch and cable parts for the home garage, compared by output, reach, weight and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
HGNVGZ 110V 250A Stick Welder9.7/10View on Amazon - 2
ARCCAPTAIN TIG Welding Gun9.5/10View on Amazon - 3
TIG Torch Power CableFlex - Model: 57Y01-RSF9.3/10View on Amazon
Verdict. For tig vs stick for home garage, pick the stick side if the garage needs a complete welder that runs on household power and comes ready to weld. Pick the TIG side if the garage already has a compatible machine and only needs a torch or a replacement cable. Neither TIG listing here is a welder on its own, so the sides are not like for like, and that gap is the whole decision.
A garage repair usually starts with a cracked bracket or a fence rail that needs joining, and the choice between processes shapes what else must be bought. This comparison looks at tig vs stick for home garage use through three listings: a complete stick welder, a TIG torch and a TIG torch cable.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The three picks
| # | Product | Gear Score | Buy |
|---|---|---|---|
| 1 | HGNVGZ 110V 250A Stick Welder | 9.7/10 | Buy on Amazon |
| 2 | ARCCAPTAIN TIG Welding Gun | 9.5/10 | Buy on Amazon |
| 3 | TIG Torch Power CableFlex - Model: 57Y01-RSF | 9.3/10 | Buy on Amazon |

HGNVGZ 110V 250A Stick Welder
A 110V stick welder rated 20 to 250A with Hot Start, Arc Force and anti-stick, in a full kit for home garage repair.
Pros
- 20 to 250A adjustable output on 110V, with Hot Start and Arc Force
- Runs E6013, E7018, E6011, E6010 and E308 rods from 1/16 inch to 3/32 inch
- Full kit with 10 rods, 10 ft cables, gloves, brushes and a DIN 11 mask
- Built-in protections against over-current, over-heat and short circuits
Cons
- Bullets give 3.5 lb for the machine only while the table lists 6.27 lb
- No warranty term is stated, only the standard Amazon return window
- Rods of 1/8 inch draw more current than this unit is built for, per the listing
- Plate of 1/4 inch needs a 220V machine, per the listing

ARCCAPTAIN TIG Welding Gun
A 150A lift TIG torch with a 13 ft air hose and cables, a 35-50mm connector and a ribbed ergonomic handle.
Pros
- 150A lift TIG torch with a 13 ft air hose for distance welding
- EPDM rubber cable hose with nylon over-braid, stated as flexible
- 8mm² high purity copper wire, multi-strand interwoven
- Ribbed ergonomic handle stated to relieve operator fatigue
Cons
- Torch only, with no welder, gas cylinder or regulator in the box
- Fits only the ARCCAPTAIN machines the listing names
- Electrode size range of 0.5 to 2.4 mm is narrow for thicker work

TIG Torch Power CableFlex - Model: 57Y01-RSF
A 12.5 ft TIG torch power cable for 9 and 17 air-cooled series TIG torches.
Pros
- 12.5 ft length for 9 and 17 air-cooled series torches
- SÜAFlex build stated as more flexible and lightweight
- Rubber and copper construction, per the listing
- Fits WP-9, WP-17 and WP-26 series torches, per the listing
Cons
- Cable only, with no torch head, welder or adaptor in the box
- No output, weight or warranty figure is stated
- Listing offers two lengths and two models, so the wrong option is easy to pick
- Not compatible with water-cooled TIG torches, per the listing
Other welders and gear to compare
135A 110V 2-in-1 Mini Stick Welder/Lift TIG Welder PortableCheck price on Amazon
S7 200A TIG Welder with DC TIG and Stick Welding 110V/220VCheck price on Amazon
Bestarc 145A MIG WelderCheck price on Amazon
LOTOS LTPDC2000D 3-in-1 50A Plasma Cutter 200A TIG StickCheck price on Amazon
PrimeWeld Pilot Arc 50A Plasma CutterCheck price on Amazon
160Amp 3 IN 1 WelderCheck price on Amazon
Side by side
| HGNVGZ 110V Stick Welder | ARCCAPTAIN WP-17V TIG Torch | SÜA 57Y01-RSF Cable | |
|---|---|---|---|
| Side | Stick | TIG | TIG |
| Type | Stick welder, complete machine | TIG torch | TIG torch power cable |
| Output | 20 to 250A, 110V | 150A lift TIG torch | Not stated |
| Reach | 10 ft cables | 13 ft air hose | 12.5 ft cable |
| Weight | 3.5 lb (bullets), 6.27 lb (table) | 400 g | Not stated |
| Warranty | Not stated | 180 Day | Not stated |
| In the box | 10 rods, 10 ft cables, gloves, brushes, mask | Back cap, collet, collet body, ceramic cup | 1 cable |
All specs here repeat what the maker rates and the listing prints, copied down 24 October 2026. No listing here states a CSA, UL or ETL listing.
Tig vs stick for home garage: what decides it
The stick side is a complete machine. The HGNVGZ listing names a 110V stick welder with cables, rods, gloves, brushes and a mask in the box. The TIG side is parts: the ARCCAPTAIN listing names a torch that fits named ARCCAPTAIN machines, and the SÜA listing names a power cable for air-cooled TIG torches. A garage without a TIG machine cannot weld with the TIG listings alone, while a garage without any welder can start with the stick listing alone.
Power and output
The HGNVGZ stick welder is rated 20 to 250A on 110V, with Hot Start, Arc Force and anti-stick. The ARCCAPTAIN torch is rated 150A as a lift TIG torch, which is a torch rating, not a machine output, so it cannot be ranked against the stick welder on amps alone. The SÜA cable states no output figure at all, so its side of the power comparison stays blank. See our duty cycle explainer for why output figures need their conditions.
Reach and weight
Reach decides how far the work can sit from the machine. The HGNVGZ kit includes a 10 ft electrode holder cable and a 10 ft work clamp cable. The ARCCAPTAIN torch carries a 13 ft air hose and cables, and the SÜA cable runs 12.5 ft. On weight, the HGNVGZ bullets give 3.5 lb for the machine only while the table lists 6.27 lb, and the ARCCAPTAIN torch weighs 400 g. The SÜA listing states no weight, so that cell stays unstated rather than guessed.
What is in the box
The HGNVGZ box is the fullest here: 10 E6013 electrodes, a 10 ft copper-core electrode holder cable, a 10 ft work clamp cable, leather gloves, brushes and a DIN 11 fixed shade mask. The ARCCAPTAIN torch includes a back cap, collet, collet body and ceramic cup. The SÜA listing includes 1 cable only. Neither TIG listing names a welder, a gas cylinder or a regulator in the box.
Warranty
The ARCCAPTAIN torch states a 180 Day warranty. The HGNVGZ listing points to the standard Amazon return window and to the product label for support terms, which is not a manufacturer warranty term. The SÜA listing states no warranty term. Warranty is the one scored area where the TIG torch leads, and only by a short term.
Choose the stick side if
- The garage has no welder yet and needs a complete machine.
- Work is fence, gate and light repair on carbon steel up to 1/8 inch thick.
- A 110V supply is available.
- Rods, cables, gloves and a mask in one box matter more than process choice.
Choose the TIG side if
- A compatible TIG machine already sits in the garage.
- Only a torch or a replacement cable is missing.
- The torch fits the machine on hand, such as the ARCCAPTAIN models the torch listing names.
- The cable fits a 9, 17 or 26 series air-cooled torch, not a water-cooled torch.
FAQ for welders
Can a TIG torch weld on its own?
No, a torch is a part, not a welder. The ARCCAPTAIN torch fits the ARCCAPTAIN machines its listing names, and the SÜA cable fits 9, 17 and 26 series air-cooled torch heads, so a compatible machine must already exist.
What power does the stick welder need?
The HGNVGZ welder runs on 110V, with 20 to 250A adjustable output.
Which rods does the stick welder run?
The HGNVGZ listing names E6013, E7018, E6011, E6010 and E308 rods from 1/16 inch to 3/32 inch, on carbon steel up to 1/8 inch thick. Rods of 1/8 inch draw more current than this unit is built for, per the listing.
Does the TIG torch fit any welder?
No, the ARCCAPTAIN torch uses a 35-50mm connector and a 5/8 inch-18 RH gas connection, and its listing names the ARCCAPTAIN machines it fits. The SÜA cable fits 9, 17 and 26 series air-cooled torches and is not compatible with water-cooled torches.
Which side states a warranty?
The ARCCAPTAIN torch states a 180 Day warranty. The HGNVGZ listing points to the standard Amazon return window and the product label, and the SÜA listing states no warranty term.
Related: can you TIG weld with a stick welder, stick vs MIG welder, flux core vs MIG, and our duty cycle explainer.
Scoring, line by line
Each pick is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| HGNVGZ 110V Stick Welder | 9.7 | 32 | 22 | 21 | 7 | 0 |
| ARCCAPTAIN WP-17V TIG Torch | 9.5 | 30 | 21 | 20 | 0 | 2 |
| SÜA 57Y01-RSF Cable | 9.3 | 26 | 19 | 19 | 0 | 0 |
A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close.




