Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

20v vs 60v Cordless Angle Grinder: Which One Should You Buy?

20V vs 60V cordless angle grinder: what voltage changes, what amp-hours decide, and four 20V examples compared by speed, batteries and safety.

20v vs 60v Cordless Angle Grinder: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Ryobi 5133001903 R18AG-0 One+ Cordless Angle Grinder AngledRyobi 5133001903 R18AG-0 One+ Cordless Angle Grinder AngledView on Amazon
  2. 2HERZO Dust Shroud for Angle Grinder 4/4.5/5 inch UniversalHERZO Dust Shroud for Angle Grinder 4/4.5/5 inch UniversalView on Amazon
  3. 3Makita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderMakita 9557PBX1 4-1/2" Paddle Switch Cut-Off/Angle GrinderView on Amazon
  4. 4DEWALT Angle GrinderDEWALT Angle GrinderView on Amazon
  5. 5Bosch GWS8-45 4-1/2 In. Angle GrinderBosch GWS8-45 4-1/2 In. Angle GrinderView on Amazon
  6. 6SKIL 6 Amp 4-1/2-Inch Corded Angle GrinderSKIL 6 Amp 4-1/2-Inch Corded Angle GrinderView on Amazon

Voltage is the first number on the box and the first question at the counter. The short answer to 20v vs 60v cordless angle grinder: the four examples in this guide are all listed as 20V in their bullets and spec tables, and they show what 20V listings state for grinding and cutting. No 60V grinder is listed in this guide, so this guide draws no 60V performance comparison from listings. This guide explains the voltage choice, then shows four 20V examples from the listings.

Other welders and gear to compare

The four examples in the gear section below are all listed as 20V, and they show what 20V listings state: speeds from 3000 to 9000 rpm and battery kits from 4.0Ah to 5.0Ah.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The short version: pick from the 20V examples by speed, battery kit and safety system. Amp-hours matter as much as voltage for runtime, so compare battery capacity alongside it.

Side by side

Spec DEWALT DCG416B DEWALT DCG412P2 RhovixStar 20V Grinder bellaDimora Grinder
Voltage 20V MAX 20V MAX 20V 20V MAX (DeWalt batteries)
Max speed 9000 rpm 8000 rpm 9000 rpm 3000-7200 rpm
Batteries Tool only 2 x 5.0Ah 2 x 4.0Ah Not included
Safety Kickback Brake, E-CLUTCH Lock-off trigger Overload protection 1.5-second emergency brake
Warranty 3 yr warranty on material and workmanship 3 year limited warranty Not stated Not stated

All specs here repeat what the maker rates and the listing prints, copied down 21 October 2026.

20v vs 60v cordless angle grinder: what voltage changes

Power and the work it does

Voltage sets the ceiling. The DEWALT DCG416B listing claims up to 54% more power when paired with FLEXVOLT batteries. Its 9000 rpm and 1550 watts cover cutting and grinding; the DCG412P2 runs 8000 rpm with a 2-finger trigger and 2-position side handle for control. The RhovixStar runs up to 9000 RPM on 4 speeds, and the bellaDimora 3000 to 7200 RPM across 4 speeds, with low speeds for precision polishing and rust removal per its listing. For weld smoothing, rust removal and cutting, 20V at these speeds does the job. The DCG416B listing also states 1550 watts and a 4-1/2 to 5 in wheel range, while the DCG412P2 listing states a 4-1/2 in wheel. No 60V example is listed in this guide, so no 60V performance comparison is drawn from these listings.

Batteries: voltage is only half the story

Amp-hours decide runtime. The DCG412P2 kit includes two 5.0Ah batteries, the RhovixStar two 4.0Ah batteries, the DCG416B is tool only, and the bellaDimora takes your existing DeWalt 20V MAX batteries with no battery included. A 5.0Ah pack is the larger tank at the same voltage. The bellaDimora listing notes brushless motors run 30%+ longer than brushed motors, so motor type matters too: three of these four are brushless. The RhovixStar listing title mentions Makita 18V battery compatibility, while its bullets and spec table state 20V and 4.0Ah batteries; the battery figures in this guide follow the bullets. If you already own 20V MAX batteries, staying on the platform you own avoids a second battery system, and two batteries in the kit means one charges while the other works.

Safety systems

Voltage does not make a grinder safe; the brake and clutch do. The DCG416B has a Kickback Brake that stops the wheel on bind-up and an E-CLUTCH that shuts the motor down in under a tenth of a second on pinch or stall. The bellaDimora stops the disc within 1.5 seconds of trigger release, against 4-6 seconds on most cordless grinders per its listing, plus a self-locking switch and anti-restart lock. The DCG412P2 has a 2-finger trigger with lock-off button. The DCG416B also lists E-Switch Protection, which requires the trigger switch to be cycled after a power outage before restart. The RhovixStar notes overload and overheating protection. Compare these systems before comparing voltages.

The gear: four examples listed as 20V from the listings

The DEWALT DCG416B is the performance pick of the group: 20V MAX FLEXVOLT ADVANTAGE, paddle switch, 4-1/2 to 5 in wheels, 9000 rpm, Kickback Brake and E-CLUTCH, tool only. It is backed by a 3 yr warranty on material and workmanship. The DEWALT DCG412P2 is the kit pick: 8000 rpm, 4-1/2 in, two 5.0Ah batteries, Quick-Change Wheel Release and tool-free guard, with a 3 year limited warranty. The RhovixStar is the full-kit pick: brushless, 4 speeds to 9000 RPM, two 4.0Ah batteries, fast charger, handle, guard and wheels in the box, with overload and overheating protection. No warranty term is stated. The bellaDimora is the bare-tool pick for DeWalt owners: brushless, 4.5 in, 4-speed 3000 to 7200 RPM, 1.5-second emergency brake, and a 15-piece kit with discs, sandpaper, wheels, safety glasses, gloves and a storage box. No battery and no warranty term are stated.

Grinder safety

  • Match the disc to the grinder: 4-1/2 to 5 in wheels on these examples, rated at or above the grinder’s rpm.
  • Use the guard every time; the listings include guards or deflectors for a reason.
  • Let the brake and clutch do their work: do not fight a bind-up, release the trigger.
  • Wear eye and face protection; grinding throws sparks and fragments.
  • Clamp the work. A grinder in one hand and loose stock in the other is how injuries happen.

FAQ for welders

Is 20V enough for an angle grinder?

For most grinding, cutting, weld smoothing and rust removal, yes: the examples here are listed at 3000 to 9000 rpm with 20V batteries in their bullets. No 60V example is listed in this guide, so a 60V comparison cannot be drawn from these listings.

Can I use 20V batteries in a 60V tool?

Not across platforms. The DCG416B runs on DEWALT 20V MAX and FLEXVOLT batteries; the bellaDimora takes DeWalt 20V MAX packs. Stay on the battery platform you own.

What does FLEXVOLT ADVANTAGE mean?

Per the DCG416B listing, the grinder gets up to 54% more power when paired with FLEXVOLT batteries.

Which of these has the best warranty?

The DCG416B states a 3 yr warranty on material and workmanship, and the DCG412P2 a 3 year limited warranty. The RhovixStar and bellaDimora listings state no warranty term.

Does a 20V grinder need a paddle or trigger switch?

Either works; it is preference. The DCG416B uses a paddle switch, the DCG412P2 a 2-finger trigger with lock-off, and the bellaDimora a self-locking switch that avoids accidental startup.

More welding guides

Related: best cordless angle grinder for job site, corded vs cordless angle grinder and best wire wheel for angle grinder.

More buying guides