Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of TIG Welders Explained

DC, AC, AC/DC, pulse and lift TIG welders explained, with the machines that run each type and how to pick the right type for steel, stainless steel and aluminum.

Types of TIG Welders Explained
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ARCCAPTAIN DC 5 In 1 TIG Welder With PulseARCCAPTAIN DC 5 In 1 TIG Welder With Pulse9.6/10View on Amazon
  2. 2150A 3-in-1 Synergic MIG Flux Core Spot Welder 120V Portable150A 3-in-1 Synergic MIG Flux Core Spot Welder 120V Portable9.4/10View on Amazon

A thin stainless steel bracket calls for a clean bead with no spatter, while a cracked aluminum casting needs a weld that holds without warping the part. Both jobs land on the same bench, and both are TIG jobs, but they need different machines. This guide explains the types of TIG welders, how each type works, and which type fits steel, stainless steel and aluminum.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

The types of TIG welders at a glance

TIG welders split by the current they run and the way they start the arc. DC TIG runs direct current and suits steel and stainless steel. AC TIG runs alternating current and suits aluminum, since the alternating current cleans the oxide layer as it welds. AC/DC TIG machines run both, so a shop that welds steel and aluminum needs a machine that switches between them. Pulse TIG adds a pulsing current for thin metal and heat control, and lift TIG starts the arc by touching the tungsten to the work and lifting it away. Multi-process machines add stick welding to the same box.

Side by side

DC TIG AC TIG AC/DC TIG Pulse TIG
Current Direct current Alternating current Switches between AC and DC Pulsed AC or DC
Metals Steel and stainless steel Aluminum Steel, stainless steel and aluminum Thin steel, stainless steel and aluminum
Example machines SOARFLY 135A, 110V, 20A to 135A Miller Syncrowave 212, up to 1/4 in welds Everlast PowerTIG 210EXT, 210 amp AC/DC AHP Alpha-TIG 225Xi, 225 amp, pulse 0.5 to 200 Hz
Voltage 110V Not stated 110/220 V 110V/220V
Weight Not stated 55.0 pounds 60.0 pounds Not stated
Pulse Not stated Pulsed TIG Standard pulse for AC and DC, plus advanced pulse for AC 0.5 to 200 Hz

Current type is the main thing to check on a machine. A DC-only machine cannot weld aluminum, and an AC/DC machine covers both. Always follow the polarity and settings in the machine manual.

When DC TIG is the better choice

  • Steel and stainless steel. DC TIG is the standard choice for steel and stainless steel, where a steady arc and a clean bead matter.
  • Thin sheet at home. A 110V machine like the SOARFLY 135A (on Amazon), rated 20A to 135A, runs on a household outlet and suits thin work in a garage.
  • Simple setup. Lift TIG starts the arc by touching the tungsten to the work and lifting it away, with no high-frequency unit to set up.
  • Stick welding in the same box. The SOARFLY 135A and the Rotvik 200A both pair stick welding with lift TIG, so a shop gets stick and TIG from a single machine.

Our best TIG welder guide covers stick and TIG combos and a dedicated TIG machine.

When AC TIG is the better choice

  • Aluminum. Aluminum needs AC TIG, since the alternating current cleans the oxide layer as it welds.
  • Clean aluminum welds. The Miller Syncrowave 212 (on Amazon) offers AC balance and frequency adjustments to fine-tune arc width and oxide cleaning, and rates welds up to 1/4 in.
  • Castings and repairs. AC TIG suits aluminum castings and repairs where oxide cleaning decides the weld quality.
  • Thick aluminum on a bigger machine. The VEVOR 6-in-1 TIG welder handles 1/4 in aluminum and 3/8 in low carbon steel.

Pulse TIG and lift TIG

Pulse TIG varies the current between a high and a low level, which cuts heat input on thin metal and helps control the puddle. The AHP Alpha-TIG 225Xi (on Amazon) runs pulse frequency from 0.5 to 200 Hz, with a minimum start of 5 amps on DC and 20 amps on AC. The Everlast PowerTIG 210EXT offers standard pulse for AC and DC, plus an advanced pulse mode for AC for welding thin material. Pre-flow and post-flow each run 0-10 sec on the AHP machine, which helps shield the tungsten and the weld as the arc starts and stops.

Lift TIG is the simple start: touch the tungsten to the work, lift, and the arc starts. The SOARFLY 135A and the Rotvik 200A both use lift TIG, and the VEVOR 6-in-1 uses a high-frequency non-contact start instead. A high-frequency start needs no touch, which suits work where a tungsten touch would mark the part.

How to tell what a machine supports

Read the process list before buying. A machine that lists AC/DC covers aluminum and steel, while a DC-only machine covers steel and stainless steel only. Look for these in the process list:

  • AC/DC. The Everlast PowerTIG 210EXT and the AHP Alpha-TIG 225Xi both run AC/DC TIG, so they cover aluminum and steel.
  • Pulse. The AHP Alpha-TIG 225Xi lists pulse frequency of 0.5 to 200 Hz, and the Everlast PowerTIG 210EXT lists standard pulse for AC and DC.
  • Start type. The SOARFLY 135A and the Rotvik 200A list lift TIG, while the VEVOR 6-in-1 lists a high-frequency start.
  • Voltage. The Rotvik 200A and the AHP Alpha-TIG 225Xi run on 110V/220V dual voltage, while the SOARFLY 135A runs on 110V household power.

Amperage sets the ceiling. The reference machines in this guide run from 135A to 225A: the SOARFLY 135A at 135A, the Rotvik 200A at 200A, the Everlast PowerTIG 210EXT at 210A, the AHP Alpha-TIG 225Xi at 225A, and the VEVOR 6-in-1 at 225A. The AHP machine gives 150 amp output on 120V and the full 225 amp output on 240V.

What size TIG welder do you need

Match amperage to the metal, not the machine, and check the door chart or manual for settings. A 135A machine on 110V suits thin work at home, while a 225A machine covers heavier shop work. The VEVOR 6-in-1 TIG welder handles 1/4 in aluminum and 3/8 in low carbon steel. For thin material, the AHP Alpha-TIG 225Xi starts at 5 amps on DC, and the Everlast PowerTIG 210EXT offers an advanced pulse mode for AC for thin material.

TIG fumes and arc flash. TIG welding makes arc flash that harms eyes and skin, so wear a welding helmet and cover exposed skin. Galvanized steel gives off fumes when welded, so weld it outdoors or with strong ventilation and keep your head out of the plume. Secure gas cylinders upright, and keep flammable material clear of the work area.

For more options, see our welders guides.

FAQ for welders

Can a DC TIG welder weld aluminum?

No. Aluminum needs AC TIG, since the alternating current cleans the oxide layer as it welds. A DC-only machine suits steel and stainless steel. For both metals, pick an AC/DC machine like the Everlast PowerTIG 210EXT or the AHP Alpha-TIG 225Xi.

What is the difference between lift TIG and high-frequency start?

Lift TIG starts the arc by touching the tungsten to the work and lifting it away. A high-frequency start ignites the arc without contact, as the VEVOR 6-in-1 does. Lift TIG needs no high-frequency unit, while a high-frequency start suits work where a tungsten touch would mark the part.

Do I need a gas cylinder for TIG welding?

Yes. TIG welding uses argon shielding gas from a cylinder, fed through the torch. The Rotvik 200A ships with an argon arc welding gun, and a regulator and cylinder come from a welding supplier. A regulator is almost never included with the machine.

Can a machine do TIG and stick welding?

Yes. The SOARFLY 135A is a 2-in-1 stick and lift TIG welder, the Rotvik 200A pairs stick welding with lift TIG, and the VEVOR 6-in-1 runs TIG and MMA stick modes. The Everlast PowerTIG 210EXT also lists stick functions with hot start and arc force control.

What size TIG welder do I need for thin steel?

Thin steel needs low amps and heat control. The SOARFLY 135A adjusts from 20A to 135A, and the AHP Alpha-TIG 225Xi starts at 5 amps on DC. Pulse helps too: the Everlast PowerTIG 210EXT offers an advanced pulse mode for AC for welding thin material.

Related: AC TIG vs DC TIG welder, what is pulse TIG welding, best TIG welder, and how do you TIG weld aluminum. Also see our best entry level TIG welder picks.

More buying guides

Welders ·

MIG Welder Types: Which Style to Buy

MIG welder types explained: gas MIG, gasless flux core, pulse MIG, synergic MIG and multi-process machines, with the figures that tell each style apart…

Welding Consumables ·

TIG Welding Rod Types and Uses

ER70S-6 covers mild steel and ER308L covers stainless, and this guide sorts the families by metal, diameter and pack size so the rod matches…