Forney vs Hobart Mig Welder: Which One Should You Buy?
Forney vs Hobart MIG welder: the 3-in-1 Forney 271 against the flux-core Hobart Handler 125, compared on output, processes, weight and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Hobart Handler 125 Flux-Core Wire Feed Welder9.5/10View on Amazon - 2
Forney 271 Easy Weld 140 MP Multi-Process Welder9.5/10View on Amazon
Verdict. Pick the Forney 271 if you want three processes in one 120V box and a 25.8 lb machine you can carry to the work; pick the Hobart Handler 125 if you want a dedicated flux-core machine with a documented path to gas MIG and a 5 year limited warranty. The Forney is the broader tool, the Hobart the longer-backed one.
Forney vs Hobart MIG welder is the choice here, and both brands sell a wire welder aimed at home and farm buyers: the Forney 271 Easy Weld 140 MP is a 3-in-1 MIG, DC TIG and stick machine on 120 volts, and the Hobart Handler 125 is a flux-core wire feed welder with a factory gas solenoid for MIG conversion. This comparison puts the two head to head on what each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The two machines

Hobart Handler 125 Flux-Core Wire Feed Welder
A flux-core wire feed welder, 25 to 130A with four voltage settings and a factory gas solenoid for MIG conversion.
Pros
- 25 to 130A with four voltage settings
- Factory gas solenoid for MIG conversion
- Rated to weld 1/8 in steel
- 5 year limited warranty
Cons
- 63 lb, more than twice the Forney's weight
- Flux core only out of the box; gas MIG needs conversion
- No duty cycle is stated
- No TIG or stick process

Forney 271 Easy Weld 140 MP Multi-Process Welder
A 120V 3-in-1 welder for MIG, DC TIG and stick, rated 140A with infinite voltage and wire feed adjustment.
Pros
- 3-in-1: MIG, DC TIG and stick from one 120V machine
- 140A max output with infinite voltage and wire feed adjustment
- 25.8 lb in an all-metal case
- 10 ft gun, 8 ft electrode holder and 8 ft ground clamp in the box
Cons
- 12 month warranty, the shorter term here
- No thickness rating is stated
- No duty cycle is stated
- Residential use only per the listing
Other welders and gear to compare
Forney 298 Easy Weld 100ST 90 Amp WelderCheck price on Amazon
Forney 85801 Mig Wire PliersCheck price on Amazon
Forney 235 AC/DC Stick WelderCheck price on Amazon
Forney 42300 Flux Core Mig Welding Wire 2-Pound PremiumCheck price on Amazon
FORNEY Easy Weld 140 Amp 120-Volt Flux-Cored Wire Feed WelderCheck price on Amazon
Forney 42302 Flux Core Mig WireCheck price on Amazon
Side by side
| Forney 271 Easy Weld 140 MP | Hobart Handler 125 | Takeaway | |
|---|---|---|---|
| Weld Score | 65 | 68 | Close totals |
| Input | 120V | Not stated | Forney stated; Hobart not stated |
| Output range | 140A max | 25 to 130A | Forney higher max |
| Processes | MIG, DC TIG, stick | Flux core; MIG via gas solenoid | Forney broader |
| Rated thickness | Not stated | 1/8 in steel | Hobart stated only |
| Gas MIG | MIG included | Flux core; gas solenoid for MIG conversion | Forney as sold; Hobart via conversion |
| Setup | 3-position switch, infinite voltage and wire feed | Four voltage settings, quick-release drive roll | Forney infinite; Hobart four taps |
| Weight | 25.8 lb | 63 lb | Forney lighter |
| Duty cycle | Not stated | Not stated | Neither stated |
| Warranty | 12 month | 5 year limited | Hobart longer |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026. Neither listing states a duty cycle.
Forney vs hobart mig welder: power and output
The Forney is rated 140A max on 120 volts and the Hobart 25 to 130A, with no input voltage stated for the Hobart. The Forney’s higher ceiling suggests more output headroom, though neither listing states a duty cycle, so there is no way to compare how long each can weld at full output; see our duty cycle explainer.
Processes
This is the real split. The Forney runs three processes, MIG, DC TIG and stick, with a 3-position switch for quick changes. The Hobart is a flux-core wire feed welder first, with a factory gas solenoid for MIG conversion, a built-in contactor and a quick-release drive roll. If the work is one process, the Hobart’s focus is fine; if the shop needs all three, only the Forney qualifies.
Rated thickness
The Hobart listing rates the machine to weld 1/8 in steel. The Forney listing states no thickness rating at all, so the two cannot be compared on this spec; do not read the output gap as a thickness gap.
Gas MIG
The Forney is a MIG machine as sold. The Hobart ships set up for flux core, with the factory gas solenoid making MIG conversion possible. Our flux core vs MIG guide explains the difference; confirm what the conversion needs beyond the solenoid before buying the Hobart for gas work.
Weight and build
The Forney weighs 25.8 lb in an all-metal case, and its listing names Portable as an additional feature. The Hobart weighs 63 lb, more than twice as much, which suits a bench or cart better than a shoulder. Neither listing names an inverter or transformer design.
What is in the box
The Forney listing names a 10 ft MIG gun, an 8 ft electrode holder, an 8 ft ground clamp, a 20amp-15amp adaptor and one extra .030 in contact tip. The Hobart listing names an 8 ft gun with liner for .030-.035 wire, two .030 in contact tips, a weld set-up chart and a work cable with clamp. Neither listing names a gas regulator or cylinder.
Warranty
The Forney states a 12 month warranty. The Hobart states a 5 year limited warranty. This is the main reason the Hobart scores higher on warranty.
Voltage settings and wire control
The Forney states infinite voltage and wire feed speed adjustments with a 3-position switch for process changes. The Hobart states four voltage settings across its 25 to 130A range, with a quick-release drive roll. Infinite adjustment lets you dial the arc in for odd thicknesses; four taps are simpler to learn and repeat. The Hobart gun takes .030 to .035 wire with two .030 in contact tips included; the Forney includes one extra .030 in contact tip with its 10 ft gun. Neither listing states a duty cycle, so there is no stated basis for comparing arc-on time. If you tune by feel, the Forney’s infinite dials fit; if you want to set and weld, the Hobart’s four settings fit.
Power supply and where each welder lives
The Forney listing states a 120-volt power source with a 20amp-15amp adaptor in the box, and lists Residential Use. At 25.8 lb in an all-metal case, it is the portable pick. The Hobart listing does not state an input voltage; it lists 25 to 130A output, a 63 lb weight and usage marked Amateur, Inside. At more than twice the Forney’s weight, it belongs on a bench or cart. Check the outlet before buying: the Forney’s included adaptor covers 20-amp and 15-amp receptacles, while the Hobart’s plug type is not stated. Neither listing names a generator rating, so do not assume generator power works.
Choose the Forney 271 if
- You want MIG, DC TIG and stick from one 120V machine.
- You carry the welder to the work and want 25.8 lb, not 63.
- Infinite voltage and wire feed adjustment matter to your welds.
- The box contents, gun, electrode holder and ground clamp, cover your leads.
Choose the Hobart Handler 125 if
- You weld flux core and want a documented path to gas MIG.
- A 5 year limited warranty matters more than portability.
- You want a stated thickness rating, 1/8 in steel.
- Four voltage settings and a quick-release drive roll suit your setup.
FAQ for welders
Which is better for a beginner, Forney or Hobart?
Between these two, the Forney offers three processes and infinite adjustment for learning, while the Hobart keeps it simpler with four voltage settings and flux core. The better pick depends on whether the beginner wants one process or three.
Can the Hobart Handler 125 weld with gas?
It ships set up for flux core. The listing states a factory gas solenoid for MIG conversion, so gas MIG is possible with the conversion parts.
How thick can each welder handle?
The Hobart listing rates the machine to weld 1/8 in steel. The Forney listing states no thickness rating, so the two cannot be compared on thickness.
Which is easier to carry?
The Forney at 25.8 lb against the Hobart at 63 lb. The Forney is the carry-to-the-work machine; the Hobart belongs on a bench or cart.
What warranty does each state?
The Forney states a 12 month warranty and the Hobart a 5 year limited warranty.
Related: best 120V MIG welder, best flux core welder, how to choose a MIG welder, and the MIG welders hub.
Scoring, line by line
Both machines are scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. The Forney leads on performance and build for its three processes and lighter case; the Hobart leads on warranty.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Hobart Handler 125 | 9.5 | 28 | 20 | 20 | 0 | 4 |
| Forney 271 Easy Weld 140 MP | 9.5 | 30 | 20 | 21 | 0 | 2 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.
Before you strike an arc. Wear a helmet with the right shade for the process and amperage, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, clear anything flammable from the area, and keep an extinguisher close. Plug a welder into a circuit sized for it, as the manual specifies.




