Welder Kit for Beginners: What to Buy First
A machine, a helmet, gloves, wire and a torch, with gas gear only when the machine runs gas: what belongs in a beginner welder kit.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN 135A Flux Core MIG Welder 110V 3-in-1 Gasless MIG9.5/10View on Amazon - 2
BILT HARD 135A 3-in-1 IGBT Inverter Welder9.4/10View on Amazon - 3
ARCCAPTAIN 200A MIG Welder 110V 220V 6 in 1 Aluminum Welding9.5/10View on Amazon
A cracked gate hinge, a trailer bracket that needs a bead, or a mower deck with a split seam: the job on the bench decides the kit. A welder kit for beginners is a machine plus the gear that lets you strike an arc from the start: a helmet, gloves, wire, a ground clamp and a torch, with gas gear only when the machine runs gas. This guide walks through each piece, using a multi-process machine as the worked example.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Welder kit for beginners: what goes in the box
A complete kit has the machine, the torch, the ground clamp, the electrode holder, wire, a helmet and gloves. The BESTMIG 145A package lists all of those, plus a 120V-240V power adapter cable, a gas tube with connector, a MIG torch contact tip, a brush and hammer set, a strap, and V and W shaped wire feed wheels installed in the machine. The TIG torch is not included, so Lift TIG needs a torch bought separately. The table below is the checklist for the box.
| What it does | In the BESTMIG 145A kit | What to check | |
|---|---|---|---|
| Machine | Runs MIG, TIG and stick | 145A multi-process, 110V/220V | Dual voltage and the processes listed |
| Helmet | Shields eyes and face from the arc | Auto-darkening helmet included | Auto-darkening, fits the way you work |
| Gloves | Protects hands from heat and spatter | Welding gloves included | Heat-rated gloves, not thin work gloves |
| Wire | Feeds the weld | 0.8mm flux-cored wire and 0.8mm solid wire | 0.8mm, matches the drive rolls |
| Ground clamp | Completes the circuit | Ground clamp included | Clean contact on bare metal |
| Electrode holder | Holds the stick rod | Electrode holder included | For stick welding |
| MIG torch | Feeds wire and gas to the puddle | MIG torch included | Contact tip size matches the wire |
| Gas tube | Carries gas to the torch | Gas tube with connector included | Cylinder and regulator not listed |
| Brush and hammer | Cleans slag and spatter | Brush and hammer set included | For slag removal after the bead cools |
| Adapter cable | Connects the machine to the wall | 120V-240V power adapter cable included | Matches the outlet you have |
| Manual | Settings and safety | User manual included | Read the manual before the machine runs |
Pick the process before the machine
The BESTMIG 145A combines Gas and Gasless MIG, Stick and Lift TIG in the same unit, with dual voltage of 110V/220V. Flux core runs without gas, which suits outdoor work where wind blows shielding gas away. Gas MIG runs cleaner indoors on thin sheet. Stick handles dirty or rusty steel. Lift TIG suits thin work and clean beads. A beginner who buys a multi-process machine can learn MIG and flux core, then try stick and TIG later without buying another machine. See our best flux core welder guide for gasless machines and our best welder for beginners guide for starter picks.
When you change the wire diameter or adjust the current, the machine automatically alters the voltage and wire feed speed, per the listing, and manual adjustments are also supported. The maker claims a 30% increase in work efficiency compared with traditional MIG welders. The display is an HD LED screen that shows voltage and current, with indicator lights visible without removing the helmet, per the listing.
Power: what the wall gives you
The machine runs on dual voltage, 110V/220V, and the package includes a 120V-240V power adapter cable. That means the machine plugs into household power and into higher voltage where it is available. Check the outlet and the breaker before the machine arrives, and follow the manual for the supply. The machine weighs 11.55 pounds and measures 11.5 x 17.9 x 13.8 in, with a handle and a shoulder strap for moving it around the shop.
Wire and thickness
The kit includes 0.8mm flux-cored wire and 0.8mm solid wire, and the listing notes that solid wire only welds at 0.8mm. Flux-cored wire runs from .030 in to .040 in, per the listing. The machine handles stainless steel, carbon steel and mild steel up to 3mm thick, per the listing. Match the wire to the metal and the thickness, and check the wire label and the machine manual for polarity: self-shielded flux core runs electrode negative, while gas-shielded wire runs electrode positive.
Safety gear that comes with the kit
The kit includes an auto-darkening helmet and welding gloves, and the machine has over-current, overload, over-voltage and overheat protection, with a metal housing. An auto-darkening helmet shields the eyes from arc flash. Weld with ventilation or outdoors with your head out of the plume, clear dry grass and anything flammable from the area, and secure gas cylinders upright with a chain. Never weld on galvanized metal without knowing the fume risk, and follow the manual for the machine.
FAQ for welders
What should a beginner welder kit include?
A machine, a torch, a ground clamp, an electrode holder, wire, a helmet and gloves. The BESTMIG 145A package lists all of those, plus a 120V-240V power adapter cable, a gas tube with connector, a brush and hammer set and a strap.
Do I need gas to start welding?
No. Flux core runs gasless, and the kit includes 0.8mm flux-cored wire. Gas MIG needs a cylinder and a regulator, which are not listed in the package, though the gas tube with connector is included.
Can a beginner machine weld TIG?
The BESTMIG 145A lists Lift TIG among its processes, but the TIG torch is not included in the package. Lift TIG needs a torch bought separately.
What thickness can a 145A machine weld?
Up to 3mm thick on stainless steel, carbon steel and mild steel, per the listing. Match the wire and the settings to the thickness, and check the manual for the machine.
What power does a beginner welder need?
The BESTMIG 145A runs on dual voltage, 110V/220V, and the package includes a 120V-240V power adapter cable. Check the outlet and the breaker before the machine arrives, and follow the manual for the supply.
Do I need to buy anything else?
For gas MIG, a gas cylinder and a regulator, which are not listed in the package. For Lift TIG, a TIG torch, which is not included. For flux core, the kit has what you need: 0.8mm flux-cored wire, a torch, a ground clamp, a helmet and gloves.
Related: how to choose a MIG welder, best welder for beginners, best 120V MIG welder, and the welders hub.




