Can Aluminum Be MIG Welded? Setup and Tips
Yes, aluminum MIG welds with a spool gun and argon shielding gas, and the listings here show spool guns from 130A to 160A with 10FT and 20FT cables.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YESWELDER 110V Tungsten Electrode Sharpener9.7/10View on Amazon - 2
MorningRo ER5356 3/32" x 39" 15LB Aluminum Tig Welding Rods9.6/10View on Amazon - 3
WeldingCity 10-Lb ER4043 TIG Welding Rod Aluminum 4043 1/8"9.6/10View on Amazon
An aluminum bracket on a trailer, a boat fitting that needs a bead, a patch on an aluminum toolbox: aluminum shows up in shop work more than steel welders expect, and the MIG machine already on the bench looks like the tool for it. Can aluminum be MIG welded? Yes, with a spool gun and argon shielding gas, because soft aluminum wire does not feed reliably through a standard MIG gun the way steel wire does. The rest is setup: the right gun for the welder, the right wire, and a clean joint.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Can aluminum be MIG welded: the short answer
Yes. Aluminum MIG welds with a spool gun and argon shielding gas. The spool gun holds a small spool of soft aluminum wire right at the gun, so the wire only travels a short distance and does not tangle in the liner the way it does through a standard MIG gun. The listings here show spool guns from 130A to 160A, with 10FT and 20FT cables, and the VEVOR kits include a roll of ER4043 0.035 in wire. Check that the gun fits the welder before you buy: each listing names the welders its gun fits, and the connector differs between brands.
Side by side
| ARCCAPTAIN 150A | VEVOR 150A | VEVOR 160A | Miller Spoolmate 150 | VEVOR 130A | HIZONE 150A | |
|---|---|---|---|---|---|---|
| Amps | 150A | 150A | 160A | 150A | 130A | 150A |
| Cable | 10FT | 20FT | 20FT | 20 ft | 10FT | 10FT |
| Wire sizes | Not stated | 0.030 in and 0.035 in | 0.030 in and 0.035 in | Not stated | 0.030 in and 0.035 in | 0.035 in, .040 in and .045 in |
| Aluminum wire | Not stated | ER4043 | ER4043 | 4000 and 5000 series | ER4043 | Not stated |
| Duty cycle | 60% at 150A | Not stated | Not stated | 60% at 150A | Not stated | Not stated |
| Fits | ARCCAPTAIN MIG205MP, MIG205PRO, MIG180, MIG200P, MIG250DP | Miller Millermatic 211, Multimatic 215, Syncrowave 210 | Miller Millermatic 212 and 252 | Millermatic 211, Multimatic 200 and 215, Syncrowave 210 | Lincoln Easy MIG 140 and 180 | HIZONE MIG-200PRO |
Amps and duty cycle are the figures to match to the welder: the ARCCAPTAIN and Miller guns state 60% at 150A, while the VEVOR guns state no duty cycle. Confirm the connector and the welder model before you buy, since each gun fits only the welders its listing names.
Why a spool gun
Aluminum wire is soft, and a standard MIG gun feeds it through a long liner from a spool in the machine. The wire buckles and tangles in that liner, which the listings call bird-nesting. A spool gun moves the spool to the gun itself, so the wire travels only a short distance from the spool to the contact tip. The HIZONE listing says its gun is made to conquer wire tangling, bird-nesting and erratic arcs, and the VEVOR listings say the transparent housing lets you see the wire that is left, so you can reload before the gun runs out. The HIZONE gun (on Amazon) holds up to 2LB wire spools, and the ARCCAPTAIN gun (on Amazon) has a transparent cover that keeps the wire clean and free from contaminants.
What you need besides the gun
The gun is only part of the setup. The VEVOR listings include a roll of ER4043 0.035 in aluminum welding wire and contact tips in 0.030 in and 0.035 in, with 5 of each size in the box besides the tip that is already fitted. The HIZONE listing includes contact tips in 0.035 in, .040 in and .045 in and U-groove drive rollers in 0.035 in and .040 in plus .040 in and .045 in. The Miller listing says its gun runs 4000 and 5000 series aluminum wire and also works with steel and stainless steel wires. Argon shielding gas comes from a cylinder, so the gas, the regulator and the hose are part of the setup too, and the cylinder needs to stay upright, chained to the bench or a cart.
Matching the gun to the welder
A spool gun is not universal: the connector and the welder model decide whether it fits. The ARCCAPTAIN gun uses a 5-Pin connection and fits ARCCAPTAIN MIG205MP, MIG205PRO, MIG180, MIG200P and MIG250DP welders. The HIZONE gun uses a 2-Pin Euro connector and fits the HIZONE MIG-200PRO. The VEVOR 150A gun is a replacement for the Miller Spoolmate 150 (on Amazon) and fits Miller Millermatic 211 and Multimatic 215 welders, while the VEVOR 160A gun replaces the Miller Spoolmate 200 Series and fits Miller Millermatic 212 and 252 welders. The VEVOR 130A gun replaces the Lincoln Magnum 100SG and fits Lincoln Easy MIG 140 and 180 welders. The Miller Spoolmate 150 fits Millermatic 211, Multimatic 200 and 215, and Syncrowave 210 welders. If the welder is not on the listing, the gun does not fit it, no matter the amps. See our budget MIG welder and best welder for beginners guides when the welder itself is the question.
Setting up for aluminum
Aluminum carries a layer of oxide that melts at a far higher temperature than the metal under it, so clean the joint before you weld and keep the wire and the work free of oil and dirt. Push the gun along the joint rather than dragging it, so the gas shields the puddle and the bead stays clean. Start from the settings in the machine’s door chart or manual, and run a bead on scrap of the same thickness before the real joint. Wear a helmet, gloves and a jacket, weld with ventilation or outdoors with your head out of the plume, and clear dry grass and anything flammable from the area. See the OSHA welding overview for the safety rules that apply to any welding job.
For more options, see our guides guides.
FAQ for welders
Can you MIG weld aluminum with a regular MIG gun?
Not well. Soft aluminum wire buckles and tangles in the long liner of a standard gun, which the listings call bird-nesting. A spool gun holds the spool at the gun, so the wire feeds a short distance and tangles far less. Every listing here is a spool gun, and none of them is a standard gun.
What gas do I need for aluminum MIG?
Argon shielding gas. Aluminum MIG runs on gas, not flux core, and argon is the shielding gas for aluminum. Check the gas your wire and machine manual recommend.
What wire do I use for aluminum MIG?
ER4043 aluminum wire in 0.035 in is the wire the VEVOR listings include, and the Miller listing names 4000 and 5000 series aluminum wire. Match the wire diameter to the contact tip and the drive roll in the gun: the VEVOR guns take 0.030 in and 0.035 in, and the HIZONE gun takes 0.035 in, .040 in and .045 in.
Do I need a special welder for aluminum MIG?
You need a welder the spool gun fits. The ARCCAPTAIN gun fits ARCCAPTAIN MIG205MP, MIG205PRO, MIG180, MIG200P and MIG250DP welders, the VEVOR 150A gun fits Miller Millermatic 211 and Multimatic 215 welders, and the VEVOR 130A gun fits Lincoln Easy MIG 140 and 180 welders. Confirm the connector and the model before you buy.
Can I weld steel with a spool gun?
Yes, with the gun that says so. The Miller listing says its Spoolmate 150 also works with steel and stainless steel wires, so the same gun can run steel wire when the job calls for it. The other listings here name aluminum only.
Related: how to choose a MIG welder, best flux core welder, MIG welder for home use, and the MIG welders hub. Also see our why a MIG welder spatters.




