Best Pulse Mig Welder for Aluminum (2026): 4 Picks
Four pulse MIG welders for aluminum compared by amps, pulse modes, spool gun, voltage and warranty, with who should skip each.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallAZZUNO 9-in-1 Combo9.6/10View on Amazon - 2
Best Double PulseYESWELDER YWM-211P9.5/10View on Amazon - 3
Best 200A LCDVEVOR Pro MIG 200A9.5/10View on Amazon - 4
Best Complete KitLIIJII 150A9.4/10View on Amazon
Aluminum on the bench asks for a different touch than steel: the puddle runs hot and fast, and the wire needs a spool gun or a Teflon liner to feed cleanly. The best pulse mig welder for aluminum pulses the arc to control the heat and feed the wire. The picks below cover machines with pulse, spool gun options and plasma cutting, with the specs each listing states.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall AZZUNO 9-in-1 Combo: 200A 9-in-1 combo with pulse aluminum MIG, plasma cutting and a 1-year warranty Check price on Amazon
- Best Double Pulse YESWELDER YWM-211P: 200A with Single Pulse and Double Pulse MIG plus synergic control Check price on Amazon
- Best 200A LCD VEVOR Pro MIG 200A: 200A 5-in-1 with pulse MIG, LCD display and welding up to 15 mm Check price on Amazon
- Best Complete Kit LIIJII 150A: 150A 5-in-1 with pulse, synergic feed and a full kit in the box Check price on Amazon
The machines

AZZUNO 200A Plasma Cutter Welder Combo
A 200A 9-in-1 plasma cutter and welder combo with pulse aluminum MIG, three aluminum methods, spool gun compatibility and a 1-year manufacturer warranty.
Pros
- 9-in-1: pulse MIG, plasma cutting, HF TIG, stick and more
- Three aluminum methods: Teflon liner, Single PULSE MIG, spool gun
- 40A plasma cut: 3/8 in clean cut, 9/16 in maximum at 220V
- 1-year manufacturer warranty stated
Cons
- Spool gun sold separately
- No safety standard is stated
- No duty cycle is stated
- No display is stated

YESWELDER 200A Aluminum MIG Welder with Pulse
A 200A aluminum MIG welder with Single Pulse and Double Pulse MIG, synergic MIG, Lift TIG and stick, with spool gun MIG and automatic protection.
Pros
- Single Pulse and Double Pulse MIG
- Synergic MIG with manual MIG
- Spool Gun MIG stated
- Automatic protection for over-current, over-voltage and over-heating
Cons
- No warranty term is stated
- No thickness is stated
- Lift TIG torch not included
- No wire capacity is stated

VEVOR Pro MIG Welder, 200A Pluse Mig Welding
A 200A 5-in-1 welder with pulse MIG, gas MIG, gasless MIG, MMA and Lift TIG, an LCD display and dual voltage, welding thicknesses up to 15 mm.
Pros
- 200A with pulse MIG and 5 processes
- Welds thicknesses up to 15 mm stated
- LCD display with overheat and current overload protection
- Dual voltage 110V/220V with voltage adapter
Cons
- Aluminum welding torch not included, bought separately
- No warranty term is stated
- Lift TIG torch not included
- No duty cycle is stated

Aluminum MIG Welder with Pulse
A 150A 5-in-1 welder with pulse aluminum MIG, synergic wire feed and a digital display, sold as a complete kit with gloves, rods, tips and a shoulder strap.
Pros
- 150A with integrated pulse function
- Synergic wire feed sets wire speed automatically
- Complete kit: torch, wire, tips, gloves, rods, strap
- Safety circuits for overheating, over-current, over-voltage and under-voltage
Cons
- Aluminum wire bought separately (.040 silicon aluminum wire)
- Adapter cable not included
- Lift TIG torch not included
- No warranty term is stated
Other welders and gear to compare
VEVOR Pro MIG WelderCheck price on Amazon
ANDELI Aluminum MIG Welder 145A,Pulse Gas MIG Lift TIG StickCheck price on Amazon
HIZONE 8 in 1 200A Plasma Cutter Welder ComboCheck price on Amazon
Millermatic® 211 PRO MIG Welder MachineCheck price on Amazon
PANERGYRIC Aluminum MIG Welder with Dipulse 300A 110V/220VCheck price on Amazon
Weldpro 200A AC/DC TIG Welder with PulseCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Max Amps | Processes | Pulse | Voltage | Warranty |
|---|---|---|---|---|---|---|
| AZZUNO 9-in-1 Combo | 9.6/10 | 200A | 9-in-1, plasma cut | Single Pulse | 110/220V | 1 year |
| YESWELDER YWM-211P | 9.5/10 | 200A | MIG, Pulse, TIG, Stick | Single + Double Pulse | 110/220V | Not stated |
| VEVOR Pro MIG 200A | 9.5/10 | 200A | 5-in-1 | Pulse | 110/220V | Not stated |
| LIIJII 150A | 9.4/10 | 150A | 5-in-1 | Pulse | 110/220V | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (9 October 2026). The AZZUNO combo is the only one that states a warranty term, 1 year, and none of the listings states a safety standard, so all four score zero for safety.
Buying guide: choosing the best pulse mig welder for aluminum
Pulse: single or double
The YESWELDER pick states Single Pulse MIG and Double Pulse MIG. The AZZUNO pick states Single PULSE MIG mode. The VEVOR pick states a pulse welding function for fast, high-quality, low-spatter welds. The LIIJII pick states an integrated pulse function for enhanced control and higher-quality welds.
Amps and thickness
Three picks run 200A: AZZUNO, YESWELDER and VEVOR. The LIIJII pick runs 150A. The VEVOR listing states welding thicknesses up to 15 mm. The AZZUNO plasma function cuts 3/8 in clean and 9/16 in maximum at 220V. No other listing here states a thickness or cut figure.
Spool gun and wire feed
The AZZUNO pick states spool gun compatibility, with the spool gun sold separately, and includes a Teflon liner in the box. The YESWELDER pick states Spool Gun MIG among its processes. The VEVOR pick takes 0.04 in and 0.05 in aluminum wire, with a maximum wire capacity of 11 lb (5 kg). The LIIJII pick sets wire speed automatically in synergic mode, and its aluminum MIG needs .040 silicon aluminum wire bought separately.
Voltage and where it runs
All four picks run on 110V or 220V. The VEVOR pick comes with a voltage adapter. The AZZUNO pick includes a 110V to 220V adapter. The LIIJII pick states the adapter cable is not included. The YESWELDER title states Workshop Power and Jobsite Power Configurations.
What comes in the box
The AZZUNO packing list includes a 15AK MIG torch, a plasma cutting torch, a TIG torch, an air filter regulator, a brush and hammer, 2 gas hoses, a ground clamp, an electrode holder, a 110V to 220V adapter and a Teflon liner. The LIIJII kit includes a MIG welding gun torch, 1.1 lb flux core wire, contact tips, a gas nozzle, a gas diffuser, an air pipe, 2 air pipe fixed clamps, an electrode holder, a ground clamp, 10 welding rods, leather gloves, a brush hammer, a shoulder strap and a user manual. The VEVOR included components list 1 set with a ground clamp. The YESWELDER included components list the MIG welding machine, a MIG torch and accessories.
Before You Strike an Arc
Before the first arc, check these points:
- The VEVOR listing states the aluminum welding torch is not included and needs to be purchased separately.
- The AZZUNO listing states the spool gun is sold separately.
- The LIIJII listing states the aluminum wire and the adapter cable are not included.
- The YESWELDER listing states the Lift TIG torch is not included.
- The AZZUNO listing warns to use correct gas only and to wear certified welding gloves and a face shield.
FAQ for welders
Can a MIG welder weld aluminum?
Yes. All four listings state aluminum MIG: AZZUNO gives three aluminum methods, YESWELDER lists aluminum among steel, stainless and aluminum, VEVOR lists aluminum wire sizes, and LIIJII lists aluminum MIG as one of five processes. Soft aluminum wire feeds best with a spool gun or Teflon liner, per the AZZUNO listing.
What does synergic mode do on a MIG welder?
The LIIJII listing states you set voltage and amperage and the welder sets the wire speed automatically. The YESWELDER listing states synergic MIG provides communication between the power source, feeder and gun. The AZZUNO listing states synergic mode automatically adjusts the settings.
Do I need a spool gun for aluminum MIG?
Not always. The AZZUNO listing gives three aluminum methods: a Teflon liner with MIG SYN or MANUAL mode, Single PULSE MIG mode, or a spool gun, sold separately, for longer or more complex jobs. The YESWELDER listing states Spool Gun MIG among its processes.
What wire sizes do these welders take?
The VEVOR listing states 0.03 in and 0.04 in flux core and solid wire, and 0.04 in and 0.05 in aluminum wire. The AZZUNO listing states solid wire from .023 in to .040 in and ER5356 aluminum wire in .035 in, .040 in and .047 in. The YESWELDER listing states up to 0.9 mm (.035 in) MIG solid wire. The LIIJII kit includes .030 in, .035 in and .04 in contact tips.
Which of these welders also cuts plasma?
Only the AZZUNO combo: its plasma function runs at 40A, with a clean cut of 3/8 in (10 mm) and a maximum cut of 9/16 in (14 mm) at 220V. The other three listings state welding only.
Related: the best MIG welder with spool gun included, the best aluminum MIG wire for beginners, the best TIG welder for aluminum and our MIG welders hub.
See also the welders hub.
Scoring, line by line
Each welder is scored on performance, build, value, safety and warranty, using only what the listing publishes. Amps, pulse modes and aluminum methods earn performance points, and a stated warranty earns warranty points. A factor the listing does not state scores zero.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| AZZUNO 9-in-1 Combo | 9.6 | 32 | 21 | 21 | 0 | 3 |
| YESWELDER YWM-211P | 9.5 | 30 | 20 | 20 | 0 | 0 |
| VEVOR Pro MIG 200A | 9.5 | 29 | 21 | 20 | 0 | 0 |
| LIIJII 150A | 9.4 | 28 | 20 | 21 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




