Left vs Right Cut Aviation Snips: Which One Should You Buy?
Left and right cut aviation snips explained: which color cuts which way, when you need both, and snip sets compared from the listings.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Amazon Basics 3-Piece Aviation Snip Set for Metal CuttingView on Amazon - 2
Crescent Wiss 9-3/4" Straight and Left Cut Aviation SnipsView on Amazon - 3
MIDWEST Blackout Aviation Snip SetView on Amazon - 4
Malco AV8 Left Cutting Vertical Aviation SnipsView on Amazon - 5
Crescent Wiss 2 Piece Offset Aviation Snips Including M6R &View on Amazon - 6
MIDWEST Special Hardness Aviation SnipsView on Amazon
Left and right cut aviation snips are not about which hand you use. They are about which way the cut curves. A left-cut snip (red handles) cuts curves to the left; a right-cut snip (green handles) cuts curves to the right. This guide explains left vs right cut aviation snips, when you need each, and shows snip sets from the listings.
Other welders and gear to compare
Amazon Basics 3-Piece Aviation Snip Set for Metal CuttingCheck price on Amazon
Crescent Wiss 9-3/4" Straight and Left Cut Aviation SnipsCheck price on Amazon
MIDWEST Blackout Aviation Snip SetCheck price on Amazon
Malco AV8 Left Cutting Vertical Aviation SnipsCheck price on Amazon
Crescent Wiss 2 Piece Offset Aviation Snips Including M6R &Check price on Amazon
MIDWEST Special Hardness Aviation SnipsCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Left vs right cut aviation snips: the difference in one paragraph
Aviation snips are compound-action snips whose jaws let the waste curl away as you cut. Left-cut snips are ground so the waste curls to the left of the cut line, letting you steer left around curves. Right-cut snips curl waste to the right for right curves. Straight-cut snips (yellow) cut straight lines and wide, gentle curves. The color code is standard: red for left, green for right, yellow for straight.
Side by side
| Left cut (red) | Right cut (green) | Straight cut (yellow) | |
|---|---|---|---|
| Cuts | Curves to the left | Curves to the right | Straight lines |
| Handle color | Red | Green | Yellow |
| Best for | Counterclockwise cuts | Clockwise cuts | Straight and wide curves |
| Example set | Amazon Basics | Amazon Basics | Amazon Basics |
Always check the listing’s stated cut direction for each snip.
When you need left-cut snips
- Counterclockwise curves. Cutting a circle counterclockwise, or any curve that bends left as you push forward.
- Notches on the left. When the waste is on the left side of your line.
- Tight left turns. HVAC fittings and ductwork often need left curves.
The Midwest Blackout set includes a left offset snip for left curves and a right offset snip for right curves. If you only ever cut left curves, a single left snip works; a set covers every direction.
When you need right-cut snips
- Clockwise curves. Cutting a circle clockwise, or curves that bend right.
- Notches on the right. Waste on the right side of the line.
- Mirror-image work. If you cut both left and right curves, you need both snips.
Do you need both, or a set of three
For most sheet metal work, buy the 3-piece set: left, right and straight. The Amazon Basics set includes all three, cuts 18 gauge cold-rolled steel and 22 gauge stainless, and carries a one-year warranty. A set means you never have to force the wrong snip around a curve, which can damage the edge.
If you only cut straight lines and gentle curves, the straight (yellow) snip alone may do; a 3-piece set covers left, right and straight cuts for varied work.
Snip examples from the listings
The Amazon Basics 3-piece set covers all three cuts here: left, right and straight snips, 18 gauge steel capacity, chrome vanadium steel with a one-year warranty. The 2.4 pound weight is listed. The set uses a high-leverage design with serrated-edge blades, a rubberized grip for a secure hold, and a latch that locks the tool shut when not in use. For a home shop doing varied work, this is the practical pick.
The Midwest 2-piece offset set includes left and right offset snips, made in the USA from molybdenum alloy steel. Offset snips keep your hands above the sheet for long cuts, and offset model snips are best for making long cuts and trim cuts. It cuts 18 gauge steel with 20% less effort claimed, via the Pinch-Thru-Point design. The blades are hot drop-forged, austemper heat-treated and black oxide coated, and the Kush’N-Power grips are chemical resistant. No straight snip is included; this is for pros who already own one.
What gauge can they cut
Check the listing’s stated capacity. The Amazon Basics cuts 18 gauge cold-rolled steel and 22 gauge stainless; the Midwest cuts 18 gauge steel. Stay within the listed capacity; cutting thicker stock risks damaging the edge. The Amazon Basics listing names metal wire among the materials its snips handle. Follow each listing’s own limits.
How to hold and cut
Keep the waste side up so it curls away from the work. For a left curve with red snips, the waste curls left; keep it clear of your line. Cut with the full jaw, not just the tips, for cleaner edges. The Amazon Basics high-leverage design with serrated-edge blades grips the metal for efficient cutting. If the snip starts to fold the metal instead of cutting, you are past its listed capacity or the blades need sharpening.
Wear gloves. Freshly cut sheet metal is sharp, and the waste curl can whip. The listings do not state cut-resistant gloves, but any snip work on steel benefits from them. Keep the pivot bolt snug.
FAQ for welders
Are left-cut snips for left-handed people?
No. Left-cut means the snip cuts curves to the left. Both left and right-cut snips are ambidextrous; the listings state hand orientation as ambidextrous. Choose by cut direction, not hand dominance.
What do the handle colors mean?
Red is left cut, green is right cut, yellow is straight cut, as shown by the left, right and straight snips in the Amazon Basics set.
Can I cut a right curve with left-cut snips?
Poorly. The jaws are ground for one direction; forcing the opposite curve twists the metal and dulls the edge. Use the right snip for the curve.
Do I need offset snips?
Offset snips (like the Midwest set) keep your hands clear of the sheet for long straight cuts. Straight-pattern snips work for short cuts and curves.
How thick a metal can aviation snips cut?
The listings here state 18 gauge cold-rolled steel and 22 gauge stainless. Do not exceed the listing’s stated capacity; thicker stock risks springing the jaws. For thicker stock, use a nibbler or shear.
Related: sheet metal shears vs tin snips.




