Gasless vs Gas Mig Welder: Which One Should You Buy?
A 135A and a 140A gasless flux core kit face a 180A gas MIG machine on output, thickness, weight, box contents and warranty.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
ARCCAPTAIN 180A MIG Welder 110V 220V 6 in 19.7/10View on Amazon - 2
ACEWELDER 140A Gasless Flux Core MIG Welder/Lift9.6/10View on Amazon - 3
TOOLIOM 135A MIG Welder, 110V Gasless Flux Core9.4/10View on Amazon
Verdict. In this gasless vs gas mig welder comparison, pick the gas side if you weld in the shop and want gas MIG: the ARCCAPTAIN MIG180 is the only listing here that runs it, at 180A on 110V or 220V. Pick the gasless side if you weld outside or carry the machine to the work: the ACEWELDER MIG140 and the TOOLIOM FLUX-135 run flux core wire with no bottle to carry, at 140A and 135A on 110V.
A fence rail cracked in the field and a trailer hinge torn off its mount both ask the same question before the first bead: does this job need gas, or does flux core wire do it? A gas MIG machine shields the puddle with gas from a bottle, while a gasless machine shields it with the flux inside the wire, so the choice is about where you weld and what you carry. This comparison puts gasless vs gas mig welder side by side, using welders from the listings as concrete examples.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
The machines

ARCCAPTAIN 180A MIG Welder 110V 220V 6 in 1
A 180A, 110V / 220V 6-in-1 multiprocess welder with gas MIG, gasless flux core, spot welding, spool gun MIG, stick and Lift TIG, with a dual color display and 2T/4T modes.
Pros
- 180A output on 110V or 220V, the highest output here
- 6 processes in 1 machine, including gas MIG and spool gun MIG
- Dual color LED display with synergic control and 2T/4T modes
- 2-Year Manufacturer warranty
Cons
- 32.74 lb, the heaviest machine here
- TIG torch and 5-pin spool gun sold separately
- No rated thickness is stated
- No wire sizes are stated

ACEWELDER 140A Gasless Flux Core MIG Welder/Lift
A 140A, 110V gasless flux core MIG, MMA and Lift TIG 3-in-1 welder with synergic or manual control, overload and overheating protection, and a 2-year warranty.
Pros
- 140A output, welds mild steel up to 4.0 mm
- Synergic or manual control for beginners and experienced welders
- Takes .030, .035 and 0.040 in flux core wire, plus 2.2 lb rolls
- 2-year warranty, with a full accessory kit in the box
Cons
- Gasless only, no gas MIG mode
- No duty cycle is stated
- No rated thickness for stick or TIG is stated
- No TIG torch is named in the box contents

TOOLIOM 135A MIG Welder, 110V Gasless Flux Core
A 135A, 110V gasless flux core MIG, stick and Lift TIG 3-in-1 welder with synergic control, at 8.7 lb, with 1 lb of flux core wire and gloves in the box.
Pros
- 135A output, welds 1/6-inch (4.0 mm) mild steel
- 8.7 lb with a handle, the lowest weight here
- Synergic control adjusts settings automatically
- 1 lb flux core wire and gloves included
Cons
- Gasless only, no gas MIG mode
- 110V only, no 220V input
- No warranty term is stated
- No safety protection is stated
Other welders and gear to compare
PONEY MIG Welder 135A 110VCheck price on Amazon
200A MIG WelderCheck price on Amazon
Bestarc 145A MIG WelderCheck price on Amazon
Futelo 160A MIG WelderCheck price on Amazon
ARCCAPTAIN 160A MIG Welder 110V 220V Gasless Gas MIG StickCheck price on Amazon
FEMEROL Plasma Cutter Welder Combo 200A Gas MIG/GaslessCheck price on Amazon
Gasless vs gas mig welder side by side
| ARCCAPTAIN MIG180 | ACEWELDER MIG140 | TOOLIOM FLUX-135 | |
|---|---|---|---|
| Gear Score | 83 | 76 | 56 |
| Input | 110V / 220V | 110V | 110V |
| Output | 180A | 140A | 135A |
| Rated thickness | Not stated | Up to 4.0 mm | 1/6-inch (4.0 mm) |
| Processes | Gas MIG, gasless flux core, spot, spool gun, stick, Lift TIG | Flux core gasless MIG, MMA, Lift TIG | Gasless flux core MIG, stick, Lift TIG |
| Gas MIG | Yes | No, gasless flux core only | No, gasless flux core only |
| Wire sizes | Not stated | .030, .035, 0.040 in | .030, .035 in |
| Weight | 32.74 lb | 9 lb | 8.7 lb |
| Warranty | 2-Year Manufacturer | 2-year warranty | Not stated |
| Box contents | Not stated | Torch, holder, clamp, brush, wire, 10 tips, 2 nozzles | 1 lb wire and gloves |
Ratings in this table are the makers’ own claims taken from each product page (11 November 2026). No listing here states a duty cycle, and none states a CSA, UL or ETL listing.
Power and output
The ARCCAPTAIN is rated at 180A on 110V or 220V, the ACEWELDER at 140A on 110V, and the TOOLIOM at 135A on 110V. The ARCCAPTAIN is the only listing here with a 220V input. No listing here states a duty cycle, so the listings leave it unclear how long each machine welds at full output; see our duty cycle explainer.
Rated thickness
The ACEWELDER is rated for mild steel up to 4.0 mm, and the TOOLIOM for 1/6-inch (4.0 mm) mild steel plate. The ARCCAPTAIN states no rated thickness, so the listings leave the gas side unclear on thickness even though it has the highest stated output. Neither gasless listing states a pass count, so treat the top figures as needing a prepared joint.
Gas MIG
The ARCCAPTAIN listing is clear: gas MIG is among its 6 modes, with a gas check function. The ACEWELDER and TOOLIOM listings are gasless only, with flux core wire and no gas mode. The ARCCAPTAIN also runs gasless flux core, so it covers both sides of this comparison in 1 machine. Our flux core vs MIG guide explains the difference.
Weight and build
The TOOLIOM weighs 8.7 lb and the ACEWELDER 9 lb, both with a handle or hand grip for carrying. The ARCCAPTAIN weighs 32.74 lb in its spec table, with a dual color LED display. The gasless machines are the ones to carry; at 32.74 lb, the ARCCAPTAIN is the shop machine of the three.
What is in the box
The ACEWELDER listing names the fullest kit: a MIG torch, electrode holder, ground clamp, brush, 0.5 kg of 0.8 mm flux cored wire, 10 contact tips and 2 nozzles. The TOOLIOM listing names 1 lb of flux core wire and welding gloves. The ARCCAPTAIN listing names no box contents, so check the listing before ordering. None of the 3 listings includes a gas regulator or cylinder.
Warranty
The ARCCAPTAIN states a 2-Year Manufacturer warranty, and the ACEWELDER states a 2-year warranty. The TOOLIOM listing states no warranty term. The two warranties match on length, so output and process choice separate the machines, not the warranty.
Choose the ARCCAPTAIN MIG180 if
- You weld in the shop and want gas MIG.
- You want 180A and a 220V input.
- You want 6 processes in 1 machine, with a dual color display.
- A 2-year warranty matters to you.
Choose the ACEWELDER MIG140 if
- You weld outside or on the farm and want no bottle to carry.
- You want the fullest kit here, with tips, nozzles and a brush in the box.
- You want synergic or manual control in 1 machine.
- A 2-year warranty matters to you.
Choose the TOOLIOM FLUX-135 if
- You carry the welder to the job and want the lowest weight here.
- Your work is mild steel up to 4.0 mm.
- You want wire and gloves in the box, ready to weld.
- 110V household current is all you have.
Before You Strike an Arc
- Power: the ARCCAPTAIN runs on 110V or 220V, while the ACEWELDER and TOOLIOM run on 110V household current, so check the circuit and the plug before the first bead.
- Wire: the gasless machines take .030 and .035 in flux core wire, and the ACEWELDER also takes 0.040 in, so match the wire to the listing before loading the spool.
- Gas: the ARCCAPTAIN is the only listing here with a gas MIG mode, so confirm the gas setup on its listing before choosing the gas side.
- On arrival: check the ground clamp and cable connections, and confirm the torch, tips and nozzles in the box match the listing.
FAQ for welders
Is gasless or gas MIG better for home use?
Gasless flux core needs no bottle, so it suits outdoor repairs and farm work, and both gasless listings here run on 110V household current. Gas MIG needs a gas setup, and the ARCCAPTAIN is the only listing here that runs it.
Can the ARCCAPTAIN MIG180 weld without gas?
Yes. Its listing names gasless flux-core MIG among its 6 modes, so it welds with flux core wire and no gas bottle. The gas MIG mode needs a gas setup.
How thick can these welders weld?
The ACEWELDER is rated for mild steel up to 4.0 mm, and the TOOLIOM for 1/6-inch (4.0 mm) mild steel plate. The ARCCAPTAIN states no rated thickness, so its listing leaves that unclear.
Do these welders need a special outlet?
The ACEWELDER and TOOLIOM run on 110V household current. The ARCCAPTAIN runs on 110V or 220V. Check the breaker size each manual calls for, since welders draw heavy current.
Can any of these welders weld aluminum?
The ARCCAPTAIN lists a spool gun MIG mode, with the 5-pin spool gun sold separately, but none of the 3 listings names aluminum as a material it welds.
Related: the best flux core welder, how to choose a MIG welder, the best multi-process welder, flux core wire welding tips, and the MIG welders hub.
Scoring, line by line
Each machine is scored out of 10 on performance, build, value, safety and warranty, with the weights published on our How We Pick page. The ARCCAPTAIN leads on stated output, the ACEWELDER on kit contents, and the TOOLIOM on weight.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| ARCCAPTAIN MIG180 | 9.7 | 33 | 22 | 21 | 7 | 3 |
| ACEWELDER MIG140 | 9.6 | 29 | 20 | 21 | 5 | 3 |
| TOOLIOM FLUX-135 | 9.4 | 28 | 20 | 20 | 0 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.




