Best Combination Bench and Pipe Vise (2026)
Four combination bench and pipe vises for a home shop, compared on jaw width, pipe capacity, swivel base and the warranty each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGioventù 6 in9.7/10View on Amazon - 2
Largest JawYost 4659.7/10View on Amazon - 3
Best CompactYost 4459.7/10View on Amazon - 4
Widest Pipe CapacityVEVOR Chain Vise9.6/10View on Amazon
A length of pipe needs a thread cut, a bracket needs a hole drilled square, and a bent fitting needs to come off without rounding. All of those jobs start the same way: clamp the work solid and keep both hands free. The best combination bench and pipe vise holds flat stock in the top jaws and round stock in the pipe jaws, so the same vise covers both kinds of work.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Gioventù 6 in: Forged steel, 6 inch jaws, 270-degree swivel and a 3 year factory warranty. Check price on Amazon
- Largest Jaw Yost 465: 6.5 inch jaw, pipe to 2.5 inches, 30,000 PSI cast iron. Check price on Amazon
- Best Compact Yost 445: 4.5 inch jaw, pipe to 2 inches, 360-degree swivel base and a 1-year limited warranty. Check price on Amazon
- Widest Pipe Capacity VEVOR Chain Vise: Pipe from 1/4 inch to 6 inches on a 28 inch chain, with two bending dies. Check price on Amazon
The machines

Bench Vise 6", Vice for Workbench with Heavy Duty
A forged steel bench vise with a 6 inch jaw, a built-in pipe jaw, a 270-degree swivel base and a clamp-on or bolt-on mount, with a 3 years factory warranty.
Pros
- Forged steel construction with a 60000 psi tensile strength in the spec table
- 6 inch serrated jaws with a built-in pipe jaw for tubes and pipes
- 270-degree swivel base for repositioning work
- Clamp-on and bolt-on mount with 4 bolts, plus a 3 years factory warranty
Cons
- No pipe diameter range is stated, only the 4.3 inch jaw opening
- Item weight is listed as 8.07 kg, with no pound figure in the listing
- Powder coat finish needs a bare spot for a ground clamp
- No anvil work surface is listed

Yost Vises 465 Combination Vise
A 6.5 inch combination vise in 30,000 PSI cast grey iron with a steel U-channel bar, a large anvil, replaceable serrated top jaws and a permanent serrated pipe jaw.
Pros
- 6.5 inch jaw width with a 5.5 inch opening and a 3.75 inch throat depth
- Pipe capacity from 1/8 inch to 2.5 inches on a permanent serrated pipe jaw
- 30,000 PSI cast grey iron with a steel U-channel bar
- 360-degree swivel base with 2 lockdowns and a large anvil work surface
Cons
- 40 pounds, the heaviest vise here
- 1-year limited warranty, shorter than the 3 years on the Gioventù
- No clamping force figure is stated
- Pipe jaw is permanent, so it cannot be swapped for smooth jaws

Yost Vises 445 Combination Vise
A 4.5 inch combination vise in 30,000 PSI cast grey iron with a steel U-channel bar, a large anvil and a 360-degree swivel base.
Pros
- 4.5 inch jaw width with a 4 inch opening and a 2.625 inch throat depth
- Pipe capacity from 1/8 inch to 2 inches on a large permanent serrated pipe jaw
- 30,000 PSI cast grey iron with a steel U-channel bar
- 360-degree swivel base with 2 lockdowns and a large anvil work surface
Cons
- 1-year limited warranty, shorter than the 3 years on the Gioventù
- Smaller jaws than the Yost 465, so less grip on wide flat stock

VEVOR Heavy-Duty Pipe Chain Vise, 1/4"
A chain pipe vise that clamps pipe from 1/4 inch to 6 inches on a 28 inch chain, with two bending dies and a cast iron base.
Pros
- Widest pipe range here, from 1/4 inch to 6 inches
- 28 inch chain with anti-slip V-jaws and a cast iron base
- Two included bending dies for bending pipe
- Mounts on workbenches, trucks or tripod stands
Cons
- No flat bench jaws, so it cannot hold bar stock or plate
- No warranty term is stated
- No swivel base is listed
- 21.8 pounds with no stated clamping force
Other welders and gear to compare
Yost Vises 460 Combination ViseCheck price on Amazon
Heavy Duty 2-in-1 Bench ViseCheck price on Amazon
WORKPRO Bench ViseCheck price on Amazon
Yost Vises 750-E Multi-Jaw Rotating Vise SystemCheck price on Amazon
Yost Vises 455 Combination ViseCheck price on Amazon
Yost Vises 750-DI Multi-Jaw Rotating Vise SystemCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Jaw width | Pipe capacity | Swivel base | Jaw opening | Weight | Warranty |
|---|---|---|---|---|---|---|---|
| Gioventù 6 in | 9.7/10 | 6 in | Not stated | 270-degree | 4.3 in | 8.07 kg | 3 years |
| Yost 465 | 9.7/10 | 6.5 in | 1/8 in to 2.5 in | 360-degree | 5.5 in | 40 lb | 1 year |
| Yost 445 | 9.7/10 | 4.5 in | 1/8 in to 2 in | 360-degree | 4 in | Not stated | 1 year |
| VEVOR Chain Vise | 9.6/10 | Not stated | 1/4 in to 6 in | Not stated | Not stated | 21.8 lb | None stated |
Ratings in this table are the makers’ own claims taken from each product page (25 October 2026).
Buying guide: what matters in a best combination bench and pipe vise
Jaw width and opening
Jaw width decides how much flat stock the vise can grip. The Yost 465 lists a 6.5 inch jaw width with a 5.5 inch opening, the Gioventù lists a 6 inch jaw width with a 4.3 inch opening, and the Yost 445 lists a 4.5 inch jaw width with a 4 inch opening. Wider jaws spread the clamping force across more of the workpiece, which helps with thin flat bar that can bend under a narrow grip. Match the opening to the thickest stock the vise will hold.
Pipe capacity
Pipe capacity is the range of round stock the pipe jaws can hold. The Yost 465 lists pipe from 1/8 inch to 2.5 inches, the Yost 445 lists pipe from 1/8 inch to 2 inches, and the VEVOR chain vise lists pipe from 1/4 inch to 6 inches on a 28 inch chain. The Gioventù lists a built-in pipe jaw but states no diameter range, so plan around the jaw opening of 4.3 inches. Serrated pipe jaws bite into round stock, while smooth jaws can let pipe turn under a wrench.
Swivel base
A swivel base turns the vise to face the work instead of moving the work. Both Yost vises list a 360-degree rotatable swivel base with 2 lockdowns. The Gioventù lists a 270-degree swivel base. The VEVOR chain vise lists no swivel base, since it mounts flat and the chain wraps the pipe. Lock the base before putting force on the work, and check the lockdowns before each use.
Mounting
Mounting decides whether the vise stays put under load. The Yost listings say to mount the vise firm to the workbench and lock the swivel base before work. The Gioventù lists a clamp-on and bolt-on combination design, with a steel screw C-clamp for clamping to a table and 4 bolts for securing it to a desk or workbench. The VEVOR chain vise mounts on workbenches, trucks or tripod stands. A vise that can move will not hold a tolerance, so bolt it down for heavy work.
Warranty
Warranty terms here run from none stated to 3 years. The Gioventù lists a 3 years factory warranty. Both Yost vises list a 1-year limited warranty and 90-day return. The VEVOR lists no warranty term. A longer stated term does not make a vise stronger, but it does say something about how long the maker stands behind it.
Use as directed. Mount the vise firm to the bench and lock the swivel base before work. Do not over-tighten, since that can damage the workpiece or the vise. Wear eye protection, and read the manual before setup and use: the Yost listings warn that misuse of vises can cause severe injury to eyes, hands and other body parts. See the OSHA welding overview for more on shop safety.
Before You Strike an Arc
- Check the jaw width and pipe capacity against the largest stock on the bench before mounting.
- Bolt the vise down and lock the swivel base, then pull on the handle to confirm nothing moves.
- Keep the serrated jaws clean so pipe and flat bar grip instead of slipping.
- Read the manual for the vise before setup and use.
FAQ for welders
What size combination vise do I need for pipe work?
Match the pipe jaws to the largest pipe on the bench. The Yost 465 lists pipe to 2.5 inches, the Yost 445 lists pipe to 2 inches, and the VEVOR chain vise lists pipe to 6 inches. For pipe larger than the bench vise can hold, the chain vise is the pick here.
Can a bench vise hold pipe without a pipe jaw?
Flat jaws can hold pipe, but round stock can turn under a wrench when the grip is only on two flat faces. Pipe jaws are serrated and shaped to bite round stock, which is why all four picks here list a pipe jaw or a chain. The VEVOR uses a chain and V-jaws instead of a fixed pipe jaw.
What is the difference between a swivel base and a fixed base?
A swivel base turns the vise to face the work. Both Yost vises list a 360-degree swivel base with 2 lockdowns, and the Gioventù lists a 270-degree swivel base. A fixed base stays in one position and suits a vise that always faces the same way.
How do I mount a combination vise to a bench?
Follow the listing instructions for the vise. The Yost listings say to mount the vise to the workbench and lock the swivel base before use. The Gioventù clamps on with a steel screw C-clamp or bolts on with 4 bolts. The VEVOR mounts on workbenches, trucks or tripod stands.
Does a chain vise replace a bench vise?
Not for flat stock. The VEVOR chain vise holds pipe from 1/4 inch to 6 inches and includes 2 bending dies, but it lists no flat jaws, so it cannot grip bar stock or plate the way a bench vise can. Pair it with a bench vise when the work mixes pipe and flat stock.
Related: best welding vise for home shop, bench vise vs welding vise, welding vise vs welding clamp, swivel vs fixed welding vise, best welding vise for mechanics, best welding vise for table, best bench vise for metal work, clamp on vs bolt down bench vise, bench vise vs drill press vise, bench vise vs post vise, best vise for pipe, what is a pipe stand, welding table vs workbench, cast iron vs forged steel bench vise, ductile iron vs cast iron bench vise, and the welding tables and carts hub.
Scoring, line by line
Each vise is scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. Vises have no electrical safety listing to state, so every vise here scores zero on that criterion; the ranking comes from the other four.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gioventù 6 in | 9.7 | 28 | 22 | 21 | n/a | 4 |
| Yost 465 | 9.7 | 30 | 21 | 21 | n/a | 3 |
| Yost 445 | 9.7 | 29 | 21 | 21 | n/a | 3 |
| VEVOR Chain Vise | 9.6 | 28 | 21 | 20 | n/a | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure. Unpowered items with no stated safety features skip the safety line, and their score comes from the 90 points that are left.




