Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Vise for Pipe: 5 Chain and Yoke Vises Compared

Pipe vises compared by capacity, vise type, jaws and chain, mounting and warranty for bench and field work.

Best Vise for Pipe: 5 Chain and Yoke Vises Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1VEVOR Bench Chain ViseBest OverallVEVOR Bench Chain Vise9.7/10View on Amazon
  2. 2VEVOR Tripod Chain ViseBest PortableVEVOR Tripod Chain Vise9.6/10View on Amazon
  3. 3MUKLEI 2-Pack Yoke ViseBest 2-PackMUKLEI 2-Pack Yoke Vise9.6/10View on Amazon
  4. 4ZEONHAK Bench Yoke ViseBest Small ShopZEONHAK Bench Yoke Vise9.6/10View on Amazon
  5. 5Pipe Vise Micro WrenchAlso ConsideredPipe Vise Micro Wrench9.2/10View on Amazon

The best vise for pipe holds the pipe still while you cut, thread or fit it, so the joint comes out square and the work stays safe. We compared pipe vises by capacity, vise type, jaws and chain, mounting and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Affiliate disclosure.

Quick picks

  • Best Overall VEVOR Bench Chain Vise: Widest capacity here, 1/2 to 8 inches, with bending dies Check price on Amazon
  • Best Portable VEVOR Tripod Chain Vise: Folding legs and carry handle, 1/8 to 5 inches Check price on Amazon
  • Best 2-Pack MUKLEI 2-Pack Yoke Vise: 2 yoke vises, 0.4 to 2.4 inches, 3 mounting holes Check price on Amazon
  • Best Small Shop ZEONHAK Bench Yoke Vise: Quick release, 0.6 to 2 inches, rod and bender Check price on Amazon
  • Also Considered Pipe Vise Micro Wrench: Hand wrench for 8 to 14 mm fittings, not a bench vise Check price on Amazon

The machines

VEVOR Heavy-Duty Pipe Chain Vise, 1/2"

VEVOR Heavy-Duty Pipe Chain Vise, 1/2"

VEVOR9.7/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench chain vise for 1/2 to 8 inch pipe, with a cast iron base, V-jaws and 2 bending dies.

Pros

  • Widest capacity here: 1/2 to 8 inches
  • Cast iron base with anti-slip V-jaws
  • 2 bending dies included
  • Mounts on benches, trucks or tripod stands

Cons

  • No warranty term is stated
  • Needs a stable surface for mounting, per the listing
  • No tripod stand is included
  • No jaw width is stated
VEVOR Tripod Pipe Chain Vise

VEVOR Tripod Pipe Chain Vise

VEVOR9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A tripod chain vise for 1/8 to 5 inch pipe, with folding steel legs, a carry handle and 2 pipe benders.

Pros

  • Folding steel legs with a carry handle for transport
  • Capacity from 1/8 to 5 inches
  • 2 pipe benders included
  • Hardened teeth for locking force

Cons

  • Bullets give the chain as 36.4 inch and also as 67 cm, which do not match
  • No warranty term is stated
  • 39.0 pounds, the heaviest listed weight here
  • Tripod only, no bench-mount option stated
MUKLEI 2 Pack 0.4 to 2.4 Inches Heavy Duty Pipe

MUKLEI 2 Pack 0.4 to 2.4 Inches Heavy Duty Pipe

MUKLEI9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of bench yoke vises for 0.4 to 2.4 inch pipe, with cast iron bodies and hardened steel jaws.

Pros

  • 2 vises in the pack
  • Cast iron body with hardened steel jaws
  • 3 mounting holes pre-cut in the base
  • Capacity from 0.4 to 2.4 inches (10 to 60 mm)

Cons

  • No warranty term is stated
  • No quick release is stated
  • No bending dies are included
Heavy Duty Forged Pipe Vise

Heavy Duty Forged Pipe Vise

ZEONHAK9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bench yoke vise for 0.6 to 2 inch pipe, with a quick release device, a rod and a bender.

Pros

  • Quick release device for fast fixing
  • Anti-rust coating on cast iron body
  • Rod and bender included
  • Hardened steel jaws

Cons

  • No warranty term is stated
  • Narrowest capacity range among the bench vises here
  • No mounting hole count is stated
  • 1 vise only, no 2-pack option stated
Pipe Vise ORIGINAL SW127-14 Micro 5 Steel

Pipe Vise ORIGINAL SW127-14 Micro 5 Steel

Pipe Vise9.2/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 inch self-adjusting hand wrench for 8 to 14 mm fittings, not a bench vise.

Pros

  • Self-adjusting with ratchet action
  • Precision machined teeth
  • Contoured handle, listed for tight working conditions
  • 0.29 lb, the lowest weight here

Cons

  • Not a bench vise: a 6 inch hand wrench
  • Capacity tops out at 14 mm, far below the bench vises
  • No warranty term is stated
  • No bench mounting is stated

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Capacity Type Jaws/chain Mounting Warranty
VEVOR Bench Chain Vise 9.7/10 1/2 to 8 inches Chain vise, bench V-jaws, 34.6 inch chain Bench, truck or tripod stand Not stated
VEVOR Tripod Chain Vise 9.6/10 1/8 to 5 inches Chain vise, tripod Hardened teeth, 36.4 inch chain Folding tripod legs Not stated
MUKLEI 2-Pack Yoke Vise 9.6/10 0.4 to 2.4 inches Yoke vise, 2-pack Hardened steel jaws Bolt-on, 3 holes Not stated
ZEONHAK Bench Yoke Vise 9.6/10 0.6 to 2 inches Yoke vise Hardened steel jaws Bolt-on base Not stated
Pipe Vise Micro Wrench 9.2/10 8 to 14 mm Hand wrench Self-adjusting teeth Not stated Not stated

All specs here repeat what the maker rates and the listing prints, copied down 3 November 2026.

Buying guide: choosing the best vise for pipe

Chain vise or yoke vise

Chain vises wrap the pipe: the VEVOR bench vise clamps 1/2 to 8 inches and the tripod clamps 1/8 to 5 inches, each with a chain and a crank or handle. Yoke vises close a jaw on the pipe: the MUKLEI pair clamps 0.4 to 2.4 inches and the ZEONHAK clamps 0.6 to 2 inches. Chain vises cover the wider pipe; yoke vises suit bench cutting and threading on smaller pipe.

Match the capacity

Match the capacity to the pipe: the bench chain vise covers 1/2 to 8 inches, the tripod covers 1/8 to 5 inches, the MUKLEI pair covers 0.4 to 2.4 inches, and the ZEONHAK covers 0.6 to 2 inches. The micro wrench covers 8 to 14 mm only, so it is not a pipe vise for bench work.

Bench, truck or tripod

Mounting decides where the work happens: the bench chain vise mounts on workbenches, trucks or tripod stands; the tripod vise stands on its own folding legs; the yoke vises bolt to a bench, with the MUKLEI listing stating 3 mounting holes. The micro wrench needs no mount at all, since it is a hand tool.

Bending dies and benders

Bending extras differ: the bench chain vise includes 2 bending dies, and the tripod vise includes 2 pipe benders, while the ZEONHAK listing includes a rod and bender. The MUKLEI pair states no bending tool.

Jaws and chain

Jaw and chain details differ: the bench vise uses anti-slip V-jaws with a 34.6 inch chain, the tripod uses hardened teeth with a 36.4 inch chain, and the yoke vises use hardened steel jaws. Check the chain length against the pipe before ordering, since a short chain cannot wrap a large pipe.

Vise Capacity Type Mounting
VEVOR Bench Chain Vise 1/2 to 8 inches Chain vise Bench, truck or tripod stand
VEVOR Tripod Chain Vise 1/8 to 5 inches Chain vise Folding tripod legs
MUKLEI 2-Pack Yoke Vise 0.4 to 2.4 inches Yoke vise Bolt-on, 3 holes
ZEONHAK Bench Yoke Vise 0.6 to 2 inches Yoke vise Bolt-on base
Pipe Vise Micro Wrench 8 to 14 mm Hand wrench Not stated

Before You Strike an Arc

  • Check the capacity against the pipe before clamping: the bench chain vise covers 1/2 to 8 inches, the tripod covers 1/8 to 5 inches, and the yoke vises cover smaller pipe.
  • Check the mount: the bench vise needs a stable surface, the tripod stands on its own legs, and the yoke vises bolt down through the base.
  • Check the chain length on the tripod vise: the bullets give 36.4 inch and 67 cm, which do not match.
  • Check the color on the MUKLEI pack: the title says Orange while the bullets describe red.
  • Set the micro wrench aside for fittings: it is a hand wrench, not a bench vise for pipe.

FAQ for welders

Can a chain vise hold small pipe?

Yes, within its range: the tripod vise clamps from 1/8 inch, and the bench vise clamps from 1/2 inch. Below the stated low end, the chain cannot grip as listed. Match the pipe to the stated range.

Do I need a stand for a pipe vise?

Not always: the bench chain vise mounts on a workbench, a truck or a tripod stand, and the yoke vises bolt to a bench. The tripod vise brings its own folding legs. The micro wrench needs no mount, since it is a hand tool.

What is the difference between a chain vise and a yoke vise?

A chain vise wraps a chain around the pipe and tightens it with a crank or handle. A yoke vise closes hardened jaws on the pipe with a screw rod. Chain vises cover wider pipe here; yoke vises suit bench cutting and threading.

Can the micro wrench replace a pipe vise?

No: it is a 6 inch hand wrench for 8 to 14 mm fittings, not a bench vise. It lists small nuts, supply lines and toilet bolts as uses. For cutting or threading pipe on a bench, use a bench or tripod vise.

Do any of these vises state a warranty?

No: none of the 5 listings states a warranty term. Warranty is Not stated for every pick here.

Related: clamp on vs bolt down bench vise, bench vise vs drill press vise, cast iron vs forged steel bench vise, and the welding tables and carts hub. Also see our best bench vise for farm shop. Also see our best welding vise for home shop.

Scoring, line by line

Each vise is scored on performance, build, value, safety and warranty, using only what the listing publishes. No listing here states a safety standard or a warranty term, so no pick scores on safety or warranty here. How we pick explains the weights.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
VEVOR Bench Chain Vise 9.7 32 22 21 n/a 0
VEVOR Tripod Chain Vise 9.6 30 21 20 n/a 0
MUKLEI 2-Pack Yoke Vise 9.6 29 21 20 n/a 0
ZEONHAK Bench Yoke Vise 9.6 28 20 20 n/a 0
Pipe Vise Micro Wrench 9.2 16 12 5 n/a 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.

More buying guides

Welding Tables and Carts ·

Best Combination Bench and Pipe Vise (2026)

Four combination bench and pipe vises for a home shop, compared on jaw width, pipe capacity, swivel base and the warranty each listing states.

Welding Tables and Carts ·

What Is a Pipe Stand?

A pipe stand supports, levels, and steadies pipe or round tubing for welding, cutting, threading, and fit-up in the shop or field.