Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 7018 1 8 Welding Rod (2026): 4 Low-Hydrogen Picks Scored

Four 7018 1/8 inch stick welding electrodes for the shop, compared on pack weight, stated operating polarity, amperage range, flux type, and packaging.

Best 7018 1 8 Welding Rod (2026): 4 Low-Hydrogen Picks Scored
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1YESWELDER E7018 5LBBest OverallYESWELDER E7018 5LB9.5/10View on Amazon
  2. 2ARCCAPTAIN E7018 10LBBest 10 lb PackARCCAPTAIN E7018 10LB9.5/10View on Amazon
  3. 3TOOLIOM E7018 5LBBest for AC or DCTOOLIOM E7018 5LB9.5/10View on Amazon
  4. 4HYW Products E7018 50LBBest Bulk CanHYW Products E7018 50LB9.3/10View on Amazon

When you clamp up a cracked tractor bracket, a trailer tongue, or heavy steel plate on the bench, you reach for an electrode that lays down strong, crack-resistant beads without fuss. Finding the best 7018 1 8 welding rod comes down to matching your power supply, your project volume, and how you store low-hydrogen consumables in your shop. This roundup evaluates four 1/8 inch E7018 stick electrode options ranging from 5 lb cartons to a 50 lb steel can, comparing them on stated amperage ranges, operating polarity, flux coating, and listing accuracy.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall YESWELDER E7018 5LB: Stated 115A to 165A operating range on DCEP or AC, 14 inch length, clean specifications, and a handy 5 lb pack size. Check price on Amazon
  • Best 10 lb Pack ARCCAPTAIN E7018 10LB: A 10 lb pack of 1/8 inch rods with 14 inch length for larger fabrication jobs, suitable for AC or DCEP welding. Check price on Amazon
  • Best for AC or DC TOOLIOM E7018 5LB: Stated 115A to 165A amperage range, AC and DC operation, potassium iron powder flux, and a 5 lb package. Check price on Amazon
  • Best Bulk Can HYW Products E7018 50LB: A 50 lb steel can that seals 14 inch 1/8 electrodes against moisture for heavy shop consumption. Check price on Amazon

The machines

YESWELDER E7018 1/8'' 5LB Welding Rods Stick

YESWELDER E7018 1/8'' 5LB Welding Rods Stick

YESWELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 lb carton of 1/8 inch E7018 electrodes with published 115A to 165A operating parameters for AC or DCEP welding.

Pros

  • States a recommended amperage range of 115A to 165A
  • All-position electrode rated for AC or DC reverse polarity
  • Convenient 5 lb package for small shop repairs and maintenance
  • Listing specifies low-hydrogen iron powder coating and 14 inch length

Cons

  • No warranty term is stated in the listing
  • 5 lb pack is small for structural production runs
  • Listing does not state a moisture-resistant storage container type
ARCCAPTAIN E7018 Welding Rods 1/8" 10LB Low

ARCCAPTAIN E7018 Welding Rods 1/8" 10LB Low

ARCCAPTAIN9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10 lb pack of 1/8 inch all-position E7018 rods with 14 inch length, designed for structural steel and frames on AC or DCEP.

Pros

  • 10 lb package provides more rod for medium fabrication jobs
  • Suitable for welding in all positions with AC or DC reverse polarity
  • Listing specifies 1/8 inch diameter and 14 inch electrode length
  • Low-hydrogen iron powder coating for carbon steels and frames

Cons

  • No warranty term is stated in the listing
  • Listing does not state a recommended amperage range
  • Listing does not state storage container details or seal type
TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5 lb pack of 1/8 inch E7018 stick electrodes with potassium flux, rated for 115A to 165A on AC and DC power sources.

Pros

  • States operating current for both AC and DC machines
  • Published amperage recommendation of 115A to 165A
  • Low-hydrogen potassium iron powder flux for all-position work
  • Compact 5 lb pack with standard 14 inch rod length

Cons

  • No warranty term is stated in the listing
  • 5 lb quantity requires frequent reordering on bigger fab jobs
50 lb Steel Can E7018 1/8" Stick electrodes

50 lb Steel Can E7018 1/8" Stick electrodes

HYW Products9.3/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A bulk 50 lb steel can of 1/8 inch E7018 electrodes with 14 inch length, packaged to protect low-hydrogen coating from moisture.

Pros

  • Supplied in a 50 lb steel can to protect low-hydrogen flux
  • Bulk 50 lb quantity suits heavy shop fabrication and farm repairs
  • States AWS A 5.1-04 specification compliance
  • Standard 1/8 inch diameter and 14 inch rod length

Cons

  • No warranty term is stated in the listing
  • No recommended amperage range or polarity is stated in the listing

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Package Weight Diameter Length Stated Amps Current / Polarity Warranty
YESWELDER E7018 5LB 9.5/10 5 lb 1/8 in 14 in 115A-165A AC or DCEP None stated
ARCCAPTAIN E7018 10LB 9.5/10 10 lb 1/8 in 14 in Not stated AC or DCEP None stated
TOOLIOM E7018 5LB 9.5/10 5 lb 1/8 in 14 in 115A-165A AC or DC None stated
HYW Products E7018 50LB 9.3/10 50 lb 1/8 in 14 in Not stated Not stated None stated

Ratings in this table are the makers’ own claims taken from each product page (13 October 2026).

Buying guide: how to choose the best 7018 1 8 welding rod

Package size and volume

Selecting the right package size keeps your consumables fresh and minimizes shop waste. The products compared here come in 5 lb, 10 lb, and 50 lb quantities. If you run occasional equipment repairs or hobby projects, a 5 lb or 10 lb pack makes sense because you can burn through the rods before the flux picks up room moisture. For high-volume production or structural fabrication, a 50 lb can supplies the bulk weight needed for extended welding sessions.

Operating polarity and machine compatibility

Before buying electrodes, check your stick welder output capabilities. Listings for these 1/8 rods specify operation on AC or DC reverse polarity (DCEP). Running DCEP provides a smooth arc, steady puddle wetting, and deep joint penetration on carbon steels. If your shop welder only outputs alternating current, choose an electrode like the TOOLIOM or YESWELDER that explicitly states AC compatibility with arc-stabilizing potassium in the flux.

Amperage range and heat input

Running 1/8 stick rods requires sufficient machine output. Published specifications here cite a recommended operating range of 115A to 165A. If your stick welder tops out below that window, striking an arc or maintaining a continuous bead will prove frustrating. When setting your machine, start in the middle of the manufacturer stated range and adjust for joint fit-up, plate thickness, and travel position.

Low-hydrogen flux and moisture control

The defining characteristic of E7018 electrodes is their low-hydrogen iron powder coating. This flux formulation produces ductile, crack-resistant deposits on medium-carbon and structural steels. However, low-hydrogen coatings absorb moisture from humid air once exposed. Steel cans provide a hermetic factory seal until opened, while cardboard boxes or plastic wraps offer basic protection during shipping. Store open rods properly to avoid porosity in finished beads.

Use as directed. Keep dry leather welding gloves on, shield your eyes and face with a proper dark filter lens, and clear away flammable shop trash before striking an arc. Stick welding produces heavy fumes, hot spatter, and flying slag during chipping, so maintain proper shop ventilation and wear eye protection under your helmet. See our Safety Disclaimer.

Before You Strike an Arc

  • Check your power source: ensure your machine supports AC or DC reverse polarity (DCEP) as specified for these electrodes.
  • Inspect the flux coating on arrival: look over the rods for chips, cracks, or missing flux along the 14 inch length before clamping one in your stinger.
  • Prep your joint fit-up: grind off mill scale, oil, and heavy rust down to clean metal, which helps the low-hydrogen coating prevent weld porosity.
  • Set your machine amperage: dial in within the manufacturer-stated range of 115A to 165A where published, adjusting for joint position and steel thickness.

FAQ for welders

How to read 7018 welding rod?

The 7018 designation describes the core mechanical properties and coating of the electrode. The first two digits signify tensile classification, while the third digit indicates an all-position electrode suitable for flat, horizontal, vertical, and overhead passes. The final digit marks a low-hydrogen flux coating containing iron powder, formulated for smooth bead profile, low spatter, and sound X-ray quality.

What amperage should I run for a 1/8 7018 rod?

For 1/8 inch 7018 stick electrodes, listings publish an operating range between 115A and 165A. Within that span, flat fillet welds on thicker plate run toward the higher current limit, while vertical-up joints and out-of-position passes require dialing back toward the lower end to control the puddle. Machine output varies, so run a bead on scrap to verify penetration and slag peeling.

Can a 1/8 7018 welding rod run on AC and DC?

Yes, these 7018 electrodes are formulated for both AC and DC operation. On DC power sources, they run on reverse polarity (DCEP), which concentrates heat into the electrode for deep penetration on heavy plate. When running on an AC stick machine, the potassium in the flux stabilizer helps maintain an active arc through the alternating current cycle.

Why choose a 50 lb can of 7018 welding rod over smaller packs?

A 50 lb steel can provides an airtight factory barrier that shields low-hydrogen flux from ambient shop humidity before you open it. By comparison, 5 lb and 10 lb cartons suit maintenance tasks and small repair batches that you burn through quickly. Once any low-hydrogen container is unsealed, exposure to moist air degrades weld quality over time.

How many 1/8 7018 welding rods in a pound?

Manufacturer listings do not state the exact piece count per pound, selling rods by total package weight such as 5 lb, 10 lb, or 50 lb containers. Because flux coating thickness and core wire tolerances vary between brands, piece counts per pound fluctuate across production lots. Check the physical carton label or manufacturer packaging if your shop job sheet requires an exact rod count.

Related: welding consumables, what amperage for 1/8 7018 rod, how to store 7018 rods without a rod oven, and what does 7018 mean on a welding rod. Also see our welding rod amperage chart. Also see our welding rods guide. Also see our best welding rods for mild steel. Also see our best welding rods for AC welder. Also see our DC vs AC stick welding.

More related guides (11)

Scoring, line by line

Each stick electrode is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. Welding consumables have no electrical safety listing to state, and none of these listings publish a warranty term, so every product here scores zero on safety and warranty; the ranking comes from performance, build quality, and value.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
YESWELDER E7018 5LB 9.5 30 21 21 0 0
ARCCAPTAIN E7018 10LB 9.5 29 21 21 0 0
TOOLIOM E7018 5LB 9.5 29 20 21 0 0
HYW Products E7018 50LB 9.3 26 16 20 0 0

The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.

More buying guides

Welding Consumables ·

6013 Welding Rod Specifications Explained

6013 welding rod specifications cover diameter, length, pack weight, current type, and tensile strength for mild steel rods that suit sheet metal, duct work,…

Welding Consumables ·

Best Welding Rod for Vertical Welding (2026)

Four stick electrodes for vertical welding, compared on diameter, pack weight, positions and power, from a fast-freezing E6011 to a hardfacing rod.