6013 Welding Rod Specifications Explained
6013 welding rod specifications cover diameter, length, pack weight, current type, and tensile strength for mild steel rods that suit sheet metal, duct work, and repair jobs.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
E6013 Welding Rods 3/32”, 5 lb9.5/10View on Amazon - 2
Arcomin E6013 3/32" Welding Rods 5LB9.5/10View on Amazon - 3
6013 welding rod 3/32 3LB Carbon Steel Sticks9.4/10View on Amazon - 4
E6013 1/8" 5/32" Premium Arc Welding Rods Carbon9.3/10View on Amazon
A thin panel with a cracked bracket, a duct joint that needs closing, and a fence rail with a gap at the fit up all call for the same kind of rod. The rod has to start an arc without fuss, lay a smooth bead on thin steel, and leave slag that comes off without a fight. That is the job behind 6013 welding rod specifications, and this guide collects the diameters, lengths, pack weights, current types, and positions the listings state, so you can match a rod to the work.
This guide links to product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

E6013 Welding Rods 3/32”, 5 lb
A 3/32 inch E6013 rod in a 5 lb box that states tensile strength, AC and DC current, and 110V compatibility.
Pros
- States tensile strength of approximately 60,000 psi
- States AC and DC current, DCEN and DCEP, and 110V compatibility
- States a 3/32 inch diameter and a 14 inch length in a 5 lb box
- States all position welding with medium to shallow penetration
Cons
- Pack weight of 5 lb suits small jobs rather than heavy fabrication
- No warranty term is stated
- No length is stated outside the size line in the listing
- Diameter is limited to 3/32 inch in this listing

Arcomin E6013 3/32" Welding Rods 5LB
A 3/32 inch E6013 rod in a 5 lb pack that states AC and DC use and moisture resistant packaging.
Pros
- States AC and DC machines, including low voltage AC setups
- States a 3/32 inch diameter, stated as 2.5 mm, in a 5 lb pack
- States moisture resistant packaging for long term storage
- States all position welding with shallow penetration and self releasing slag
Cons
- Length is not stated
- No warranty term is stated
- Tensile strength is not stated
- Diameter is limited to 3/32 inch in this listing

6013 welding rod 3/32 3LB Carbon Steel Sticks
A 3/32 inch E6013 rod in a 3 lb pack that states a 14 inch length and shallow penetration for thin sheet.
Pros
- States a 3/32 inch diameter, a 14 inch length, and a 3 lb pack
- States all position welding with shallow penetration for thin metal
- States minimal spatter and slag that peels off after cooling
- States use on thin gauge metal panels, sheet metal, and ventilation duct work
Cons
- Current type is not stated
- Tensile strength is not stated
- No warranty term is stated
- Pack weight of 3 lb suits small jobs rather than heavy fabrication

E6013 1/8" 5/32" Premium Arc Welding Rods Carbon
An E6013 rod listing in two diameters, 1/8 inch and 5/32 inch, in a 60 lb pack sold as 10 lb x 6-pk.
Pros
- States diameters of 1/8 inch and 5/32 inch
- States a 60 lb pack, sold as 10 lb x 6-pk
- States all position welding for mild steel fabrication
- States shallow penetration for poor fit up
Cons
- Length is not stated
- Current type is not stated
- Tensile strength is not stated
- No warranty term is stated
6013 welding rod specifications at a glance
Every rod in this guide is an E6013 general purpose mild steel electrode. All four listings describe all position welding and shallow penetration. The Buelkmag, Metal Marlin, and Arcomin listings also describe smooth arcs, low spatter, and slag that releases with little cleanup; the HYW listing states none of those three. Across the listings, that combination is linked to sheet metal, duct work, brackets, fences, racks, and repair jobs on mild steel where fit up is poor and burn through is a risk. The maker of the Metal Marlin rod states tensile strength of approximately 60,000 psi, and that rod also states AC and DC current, DCEN and DCEP, and 110V compatibility. The Arcomin rod states AC and DC machines, including low voltage AC setups, and a diameter of 3/32 inch, stated as 2.5 mm, with a pack weight of 5 lb. The Buelkmag rod (on Amazon) states a diameter of 3/32 inch, a length of 14 inches, and a pack weight of 3 lb. The HYW listing states diameters of 1/8 inch and 5/32 inch, and a pack weight of 60 lb, sold as 10 lb x 6-pk.
Side by side
| Specification | Metal Marlin 3/32 5 lb | Arcomin 3/32 5 lb | Buelkmag 3/32 3 lb | HYW 1/8 and 5/32 60 lb |
|---|---|---|---|---|
| Diameter | 3/32 in | 3/32 in | 3/32 in | 1/8 in and 5/32 in |
| Length | 14 in | Not stated | 14 in | Not stated |
| Pack weight | 5 lb | 5 lb | 3 lb | 60 lb |
| Tensile strength | Approximately 60,000 psi | Not stated | Not stated | Not stated |
| Current | AC/DC, DCEN/DCEP | AC/DC, including low voltage AC | Not stated | Not stated |
| Machine voltage | 110V | Not stated | Not stated | Not stated |
| Positions | All positions | All positions | All positions | All positions |
| Penetration | Medium to shallow | Shallow | Shallow | Shallow |
The table shows where the listings agree and where they stay quiet. All four listings state all position welding and shallow penetration. Diameter, length, pack weight, current type, and tensile strength differ from listing to listing, so match the stated figures to the rod diameter and pack size the job needs, and check the rod listing for the current type it needs and the machine manual for what the machine supplies.
Diameter and length
Diameter is the first figure to match to the metal. Three listings state a diameter of 3/32 inch, and the HYW listing states diameters of 1/8 inch and 5/32 inch. Length is stated for two rods: the Buelkmag rod states a length of 14 inches, and the Metal Marlin listing states a size of 3/32 inch x 14 inches in a 5 lb plastic box. Length is not stated for the Arcomin rod or the HYW rod. The 3/32 inch size is the size the listings link to thin gauge metal panels, sheet metal fabrication, and ventilation duct projects.
Current, position, and penetration
Current type matters because a rod that needs DC will not suit a machine that only supplies AC, and the listings do not all state it. Metal Marlin states AC and DC current, DCEN and DCEP, and 110V compatibility. Arcomin states AC and DC welding machines, including low voltage AC setups. Current type is not stated for the Buelkmag rod or the HYW rod. Position is stated for every rod here. Metal Marlin and Arcomin name flat, horizontal, vertical, and overhead welding, while Buelkmag and HYW state all position welding. All four state shallow penetration, and Buelkmag, Arcomin, and HYW link it to joints with poor fit up. Metal Marlin states medium to shallow penetration, and the other listings state shallow penetration.
Pack weight and storage
Pack weight is stated for every rod here. Buelkmag states a pack weight of 3 lb. Metal Marlin and Arcomin each state a pack weight of 5 lb. HYW states a pack weight of 60 lb, sold as 10 lb x 6-pk. Arcomin is the only listing here that states moisture resistant packaging for long term storage. No listing in this guide states a warranty term. Keep rods dry and keep the pack closed between jobs.
6013 rods in this guide
Diameter, length, current type, and pack weight are the measurements to match before ordering, and the rods below give the figures their listings state for sheet metal, duct, and repair work.
FAQ for welders
What is a 6013 welding rod used for?
A 6013 rod is a general purpose mild steel electrode for light fabrication, sheet metal, duct work, brackets, fences, racks, and repair jobs. All four listings describe all position welding with shallow penetration. Buelkmag, Metal Marlin, and Arcomin describe a smooth arc, low spatter, and slag that releases with little cleanup. It suits joints with poor fit up and thin metal where burn through is a risk.
Can 6013 rods weld sheet metal without burning through?
Buelkmag and Metal Marlin link their 3/32 inch rods to thin gauge metal panels and sheet metal fabrication, and Buelkmag states shallow penetration to avoid burning through thin metal sheets. Fit up, joint preparation, and the machine settings still matter, so check the machine manual and the rod listing before welding thin panels. The 3/32 inch rods in this guide are the sizes the listings link to thin sheet work.
Do 6013 rods run on AC and DC?
Two listings in this guide state AC and DC compatibility. Metal Marlin states AC and DC current, DCEN and DCEP, and 110V compatibility. Arcomin states AC and DC welding machines, including low voltage AC setups. Current type is not stated for the Buelkmag rod or the HYW rod, so check the listing and the machine manual for those rods before ordering.
What pack size suits a home shop?
The packs in this guide state weights of 3 lb, 5 lb, and 60 lb, with the 60 lb pack sold as 10 lb x 6-pk. Arcomin states moisture resistant packaging for long term storage.
How is slag handled after a 6013 weld?
Buelkmag states that flux slag peels off after cooling, with self cleaning during vertical down fillet welding, and Metal Marlin states fast, easy slag removal. Arcomin states self releasing slag for vertical down welds and a cleaner workspace. Let the weld cool, chip the slag, and brush the bead before the next pass or before painting.
Related: 6013 welding rod uses, best welding rod for steel, and the welding consumables hub. Also see best 6013 welding rod for farm repairs.




