Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

6013 Welding Rod Uses: Where It Works Best

6013 rods suit thin steel, ducts, gates and general repair, with shallow penetration, easy slag removal and all-position welding.

6013 Welding Rod Uses: Where It Works Best
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 16013 welding rod 3/32 12LB Carbon Steel Sticks6013 welding rod 3/32 12LB Carbon Steel Sticks9.6/10View on Amazon
  2. 2Hobart 770470 6013 Stick, 1/8-10 lb.Hobart 770470 6013 Stick, 1/8-10 lb.9.6/10View on Amazon
  3. 3ATLASWELDER 6013 Welding Rod 3/32" 10LBATLASWELDER 6013 Welding Rod 3/32" 10LB9.6/10View on Amazon
  4. 4Sunstac E6013 Carbon Steel Welding RodSunstac E6013 Carbon Steel Welding Rod9.6/10View on Amazon

A gate hinge has cracked off its post, a sheet metal patch needs laying over a rust hole, a railing joint needs building back up: the jobs are thin steel, odd angles and fit-up gaps that are less than perfect. 6013 welding rod uses cover exactly that kind of work: a general-purpose mild steel stick rod that runs in all positions, with shallow penetration that does not burn through thin metal and slag that peels off clean.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

6013 welding rod 3/32 12LB Carbon Steel Sticks

6013 welding rod 3/32 12LB Carbon Steel Sticks

Buelkmag9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch E6013 rod in a 12 pound pack, with shallow penetration for thin metal and slag that peels off after cooling.

Pros

  • Shallow penetration to avoid burning through thin metal sheets
  • All-position welding, including vertical down fillet work
  • Slag peels off effortlessly after cooling, with a self-cleaning effect
  • 12 pounds, the largest pack weight here

Cons

  • No polarity is stated
  • No tensile strength figure is stated
  • Limited to non-load-bearing structural repair, per the listing
  • No other diameter is offered
Hobart 770470 6013 Stick, 1/8-10 lb.

Hobart 770470 6013 Stick, 1/8-10 lb.

Hobart9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 1/8 inch E6013 stick in a 10 pound pack, with 60,000 PSI tensile strength and AC, DCEP or DCEN operation.

Pros

  • 60,000 PSI tensile strength stated
  • Runs on AC, DCEP or DCEN
  • Light-to-medium penetration, all-purpose stick
  • 1/8 inch, the only thicker diameter here

Cons

  • No rod length is stated, only the 14.5 inch package
  • No warranty term is stated; the warranty field reads 0
  • No slag or spatter statement is given
  • Only the 1/8 inch diameter is listed
ATLASWELDER 6013 Welding Rod 3/32" 10LB

ATLASWELDER 6013 Welding Rod 3/32" 10LB

ATLAS WELDER9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch E6013 rod in a 10 pound pack, with all-position welding, a smooth arc and fast slag removal.

Pros

  • All-position: flat, horizontal, vertical and overhead
  • Smooth arc with minimal spatter and fast slag removal
  • A 1/8 inch diameter and a 5 LB pack are also offered
  • Names automotive repairs, gates, railings and sheet metal

Cons

  • No polarity is stated
  • No tensile strength figure is stated
  • No warranty term is stated
  • No coating type is stated
Sunstac E6013 Carbon Steel Welding Rod

Sunstac E6013 Carbon Steel Welding Rod

Sunstac9.6/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch E6013 rod in a 5 pound pack, with AC/DC operation, a titanium oxide coating and easy re-arc for thin plate work.

Pros

  • AC/DC operation stated
  • Titanium oxide coating with a stable arc and less spatter
  • Easy re-arc with flexible molten pool control
  • Suits thin plate welding, cover welding and narrow spaces

Cons

  • 5 pounds, the smallest pack weight here
  • No tensile strength figure is stated
  • No warranty term is stated
  • The 3/32 inch size is the only diameter listed

6013 welding rod uses: what the rod is for

An E6013 rod is a mild steel stick electrode with a flux coating that steadies the arc and leaves a slag cover over the bead. Three of the listings here describe a stable arc with minimal spatter, easy slag removal and all-position welding: flat, horizontal, vertical and overhead. The Hobart listing states 60,000 PSI tensile strength and light-to-medium penetration, and the Buelkmag listing calls out shallow penetration for thin metal. That combination is why the rod shows up on repair work and light fabrication rather than heavy structural joints: it lays a smooth bead on thin steel without punching through it.

Side by side

Rod Gear Score Diameter Length Weight Polarity Penetration
Buelkmag E6013 12LB 9.6/10 3/32 in 14 in 12 lb Not stated Shallow
Hobart 770470 9.6/10 1/8 in Not stated 10 lb AC, DCEP, DCEN Light to medium
ATLAS E6013 10LB 9.6/10 3/32 in 14 in 10 lb Not stated Not stated
Sunstac E6013 5LB 9.6/10 3/32 in 14 in 5 lb AC/DC Not stated

Diameter and length are the rod figures the listings state; polarity is stated only where the listing names it. The ATLAS listing also offers a 1/8 inch diameter and a 5 pound pack, so check the size on the box before ordering.

Where 6013 works

  • Sheet metal and thin panels. The Buelkmag listing names thin gauge metal panels and sheet metal fabrication, and the Sunstac listing names steel plates and thin plates.
  • Ventilation ducts. The Buelkmag listing names ventilation duct projects and ventilation duct repair.
  • Gates, railings and fences. The ATLAS listing names gates and railings, and the Buelkmag listing names metal fences and racks.
  • Automotive repairs and home projects. The ATLAS listing names automotive repairs, home projects and maintenance, and the Sunstac listing names fine operations and cover welding.
  • Repairs in tight spots. The Sunstac listing names complex structures and narrow spaces, and the Buelkmag listing names joints with poor fit-up gaps.

Thin metal and fit-up

Shallow penetration is the point of this rod. The Buelkmag listing states shallow penetration to avoid burning through thin metal sheets, and the Hobart listing calls its rod light-to-medium penetration. The Sunstac listing adds easy re-arc and flexible molten pool control for thin plate welding and fine operations, and the Buelkmag listing notes a self-cleaning effect during vertical down fillet welding that streamlines post-weld cleanup. The Buelkmag listing says the rod suits joints with poor fit-up gaps, and the ATLAS listing says it delivers stable performance in flat, horizontal, vertical and overhead positions.

6013 welding rod uses: the rods in this guide

The rods below cover the uses above, from thin sheet and duct work to gates and general repair, so match the diameter and pack weight to the job on the bench.

6013 slag and fumes. Stick welding makes smoke and fumes, and hot slag can flick off when you chip it. Weld with good ventilation or outdoors with your head out of the plume, wear safety glasses under the helmet when chipping, and clear dry grass and anything flammable from the area. Check the rod box for the polarity and position limits the listing states.

FAQ for welders

What is 6013 welding rod used for?

General repair and light fabrication on mild steel: sheet metal, thin panels, ventilation ducts, gates, railings, fences and automotive repairs, per the listings here. The rod runs in all positions with shallow penetration, so it suits thin metal and joints with poor fit-up gaps. The Buelkmag listing limits its uses to non-load-bearing structural repair.

Can 6013 weld thin sheet metal without burning through?

Yes, that is its main strength here. The Buelkmag listing states shallow penetration to avoid burning through thin metal sheets, and the Sunstac listing calls the rod suitable for thin plate welding and fine operations. The Hobart listing calls its rod light-to-medium penetration. The 3/32 inch rods here are the ones the listings tie to thin metal work.

Does 6013 run on AC or DC?

Yes, per the listings here. The Sunstac listing states AC/DC operation, and the Hobart listing states AC, DCEP or DCEN. The ATLAS and Buelkmag listings do not state a polarity, so check the rod box before striking an arc.

What does the 60,000 PSI figure on the Hobart rod mean?

It is the tensile strength the Hobart listing states for its 6013 stick: 60,000 PSI. The listing pairs it with light-to-medium penetration and all-purpose use. The other listings here do not state a tensile strength figure.

How do I pick between the 3/32 inch and 1/8 inch rods?

The listings here offer 3/32 inch rods in 5, 10 and 12 pound packs and a 1/8 inch Hobart rod in a 10 pound pack. The 3/32 inch rods are the ones tied to thin metal, ducts and fine work, while the 1/8 inch Hobart rod states 60,000 PSI tensile strength and light-to-medium penetration. Match the diameter to the metal thickness and the pack weight to how much rod the job needs.

Related: the welding consumables hub, best 6013 welding rod for thin metal and best 6013 welding rod for beginners. Also see our 6013 vs 7018 welding rod comparison.

More buying guides

Welding Consumables ·

6010 Welding Rod Uses and Applications

6010 welding rod uses run from pipeline root passes to farm repair, and this guide matches each use to the diameters, packs and polarity…

Welding Consumables ·

Welding Rod Uses and Which Rod to Buy

Welding rods carry the filler metal and the flux that shield the weld, and this guide explains what each common rod is for and…