Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

6010 Welding Rod Specifications Explained

6010 rods come in 3/32, 1/8 and 5/32 inch diameters with DC+ current and a listed 60,000 psi minimum tensile strength, and this guide explains each figure.

6010 Welding Rod Specifications Explained
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Victory Welding Alloys 6010 Welding Rod 5/32" E6010 5/32" 5Victory Welding Alloys 6010 Welding Rod 5/32" E6010 5/32" 59.6/10View on Amazon
  2. 2Victory Welding Alloys 6010 Welding Rod 3/32" E6010 3/32" 5Victory Welding Alloys 6010 Welding Rod 3/32" E6010 3/32" 59.6/10View on Amazon
  3. 3ATLASWELDER 6010 Welding Rod 1/8" 10LBATLASWELDER 6010 Welding Rod 1/8" 10LB9.6/10View on Amazon

A pipe joint that has to hold, a cracked bracket on farm equipment, a root pass on a tank: the rod in the stinger decides how the bead starts and whether the slag lifts clean. 6010 welding rod specifications tell you the diameter, the length, the current and the metal the rod deposits, before you strike an arc. This guide reads those figures straight from the listings and explains what each figure means for pipe, repair and farm work.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

6010 Welding Rod Specifications in Short

An E6010 rod is a cellulosic stick electrode for carbon steel, listed for all-position welding with deep penetration and a fast-freeze arc. The maker lists diameters of 3/32 inch, 1/8 inch and 5/32 inch, lengths of 12 inches and 14 inches, and pack weights of 2 lb, 4 lb, 5 lb, 10 lb and 50 lb. The recommended current is DC+, and the deposited metal carries a listed minimum tensile strength of 60,000 psi. Those figures cover the rod from the packet to the finished bead.

Sizes Side by Side

3/32 inch 1/8 inch 5/32 inch
Length listed 12 inches or 14 inches 12 inches or 14 inches 14 inches
Pack weights listed 2 lb, 4 lb, 5 lb, 10 lb 5 lb, 10 lb, 50 lb 2 lb, 4 lb
Current listed DC+ DC+ Not stated
Tensile strength listed 60,000 psi minimum 60,000 psi minimum Not stated
Chemistry listed C 0.09, Mn 0.50, Si 0.20, P 0.012, S 0.021 C 0.09, Mn 0.50, Si 0.20, P 0.012, S 0.021 Not stated

Diameter drives the choice more than any other figure. The listings name pipeline welding, root pass work and general fabrication for these rods. The 5/32 inch size appears in the listings with a 14 inch length and small packs, so check the packet before ordering when you need that diameter.

What the 6010 Code Means

The code on the packet is an AWS classification, and the listings give the pieces to read it. The maker lists E6010 under AWS A5.1 and ASME SFA 5.1, with a minimum tensile strength of 60,000 psi for the deposited metal. The rod runs in flat, horizontal, vertical and overhead positions, which is why the listings call it an all-position rod. The coating is a high cellulose sodium type, and the arc freezes fast, so the puddle holds its shape out of position. For the full code breakdown, see welding rods number meaning and the size of welding rod chart.

Current and Polarity

6010 runs on DC+ current. The ATLAS listings state DC+ as the recommended current for the 3/32 inch and 1/8 inch diameters, and the WeldingCity listing states DC power supply only. Set the machine to electrode positive and check the door chart or the manual for the amperage range for the diameter in hand. A rod run on the wrong polarity burns rough and leaves a ragged bead, so the polarity check belongs with the fit check before the arc starts.

Deposited Metal Chemistry

The WeldingCity listing gives the typical deposited chemistry in weight percent: C 0.09, Mn 0.50, Si 0.20, P 0.012, S 0.021, with iron as the balance. Those figures describe the metal left in the joint after the rod burns, and they sit beside the 60,000 psi minimum tensile strength in the same listing. The ATLAS listings name mild steel among the uses, and the ESAB listing adds low alloy work on sections of 1/4 inch or less. Read the packet for the heat and the batch when a job calls for traceability.

Lengths and Pack Sizes

Rod length varies by listing rather than following diameter. The 1/8 inch rod comes in 12 inches and 14 inches, the 3/32 inch rod comes in 12 inches and 14 inches, and the 5/32 inch rod comes in 14 inches. Pack weights run from 2 lb and 4 lb small packs through 5 lb and 10 lb boxes to a 50 lb total made of 10 lb packs. A 5 lb box suits a short repair list, while a 10 lb box suits a run of pipe or fence work. Rods pick up moisture in a damp shop, so keep the box shut and dry between jobs.

Where 6010 Fits

The listings point 6010 at the same kind of work again and again: pipeline welding and root pass work, structural steel, maintenance and general fabrication. The ATLAS listings add farm equipment, the STARTECHWELD listing adds pipes, pressure pipes, pressure vessels, oil marine platforms, storage tanks, ship hulls and buildings, and the ESAB listing adds holding tanks, freight cars and truck chassis. The rod handles galvanized steel, sheet metal and steel with moderate surface contaminants, and it tolerates rusty or unclean surfaces better than a rod that needs clean metal. That forgiveness is why it shows up on repair trucks and in farm shops. For uses in detail, see 6010 welding rod uses.

6010 or 7018

When a job calls for a rod with a different coating and a slower freeze, the 7018 family is the usual next look. The 7018 welding rod specs guide covers its sizes and figures in the same way. Pick 6010 for the root pass and dirty steel, and 7018 for fill and cap passes where the listing calls for it.

Galvanized fumes and slag. 6010 throws hot slag, and galvanized coatings give off fumes when heated. Weld outdoors or with strong ventilation and your head out of the plume, wear safety glasses under the helmet when chipping slag, and clear dry grass and anything flammable from the area.

FAQ for welders

What does 6010 mean on a welding rod?

The code is an AWS E6010 classification. The 60 in the code marks a 60,000 psi minimum tensile strength for the deposited metal, and the listings describe an all-position rod with a fast-freeze arc for carbon steel. The rod runs on DC+ current and suits pipe, repair and fabrication work.

What diameters do 6010 rods come in?

The listings show 3/32 inch, 1/8 inch and 5/32 inch diameters. Lengths run 12 inches and 14 inches, with the 3/32 inch rod listed in 12 inches and 14 inches. Check the packet, since pack size and length vary by diameter.

Can 6010 rods weld galvanized steel?

Yes, the listings name galvanized steel among the uses, and the WeldingCity listing states the rod is unaffected by rusty, unclean or galvanized surfaces. Weld galvanized steel outdoors or with strong ventilation and keep your head out of the plume, since the coating gives off fumes when heated.

What current do 6010 rods run on?

DC+ current. The ATLAS listings state DC+ as the recommended current for the 3/32 inch and 1/8 inch diameters, and the WeldingCity listing states DC power supply only. Match the polarity to the packet and the machine manual before welding.

What pack sizes are 6010 rods sold in?

The listings show 2 lb, 4 lb, 5 lb and 10 lb packs, plus a 50 lb total made of 10 lb packs. Small packs suit short repair lists, and the larger packs suit longer runs of pipe or fabrication work.

Related: 6010 welding rod specifications, best all around stick welding rod, best stick welder for farm use, and the stick welders hub. Also see the welding rods types guide.

More buying guides

Welding Consumables ·

6013 Welding Rod Specifications Explained

6013 welding rod specifications cover diameter, length, pack weight, current type, and tensile strength for mild steel rods that suit sheet metal, duct work,…

Welding Consumables ·

6011 Welding Rod Specifications and Sizes

The listings here describe E6011 rods for rusty, painted and galvanized steel in all positions on AC or DC, and this guide compares the…