Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Welding Rods Types: Which Rod for Each Job

Welding rods types decide how a stick weld behaves on rusty steel, thin stock and load-bearing joints, and this guide matches each rod family to the job it suits.

Welding Rods Types: Which Rod for Each Job
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1ATLASWELDER 6011 Welding Rods 3/32" 5LBATLASWELDER 6011 Welding Rods 3/32" 5LB9.5/10View on Amazon
  2. 2TOOLIOM E6011 Welding Rod Carbon Steel StickTOOLIOM E6011 Welding Rod Carbon Steel Stick9.4/10View on Amazon
  3. 3Buelkmag E7018 Welding Rods 1/8'' 12LB LowBuelkmag E7018 Welding Rods 1/8'' 12LB Low9.4/10View on Amazon

The gate hinge cracked where the post meets the frame, the trailer deck has a split weld, and the fence rail snapped at a rusty joint. Each repair is stick work on steel that has seen weather, and the rod in the stinger has a lot to do with whether the bead ties in or cracks as it cools. Welding rods types are the families of stick electrodes, and each family suits a kind of steel and a kind of joint. This guide explains the main families, then matches them to the rods in this guide.

This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

ATLASWELDER 6011 Welding Rods 3/32" 5LB

ATLASWELDER 6011 Welding Rods 3/32" 5LB

ATLAS WELDER9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An E6011 rod in 3/32 inch that welds through rust and paint in any position, on AC and DC, in 5 lb and 10 lb packs.

Pros

  • Welds through rust, paint and galvanized steel with less surface prep
  • All-position rod with stable arc and easy slag removal
  • Runs on AC and DC power sources
  • Diameters of 3/32 or 1/8 inch and pack weights of 5 lb or 10 lb

Cons

  • No warranty term is stated in the listing
  • Listing does not state a recommended amperage range
  • E6011 beads leave slag to remove between passes
  • No stated tensile strength beyond the E6011 classification
TOOLIOM E6011 Welding Rod Carbon Steel Stick

TOOLIOM E6011 Welding Rod Carbon Steel Stick

TOOLIOM9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 inch E6011 rod in a 2 lb pack with a stated 40 to 80 amp range, built for AC machines and all-position work.

Pros

  • Stated amperage range of 40A to 80A for the 3/32 inch rod
  • All-position rod with fast solidification of the weld metal
  • Welds rusted, oily and poorly grooved steel with little prep
  • Low slag and low spatter during welding

Cons

  • 2 lb pack is the smallest pack weight in this guide
  • No warranty term is stated in the listing
  • Designed mainly for AC power sources, so check the listing before running it on DC
Buelkmag E7018 Welding Rods 1/8'' 12LB Low

Buelkmag E7018 Welding Rods 1/8'' 12LB Low

Buelkmag9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A low-hydrogen E7018 rod in 1/8 inch for load-bearing structures, thick steel and heavy-duty structural repairs.

Pros

  • Low-hydrogen rod for load-bearing structures and thick steel
  • All-position welding with moderate deep penetration
  • Ultra-low spatter with compact, uniform beads
  • 12 lb pack suits a run of structural repair work

Cons

  • No warranty term is stated in the listing
  • Listing does not state a recommended amperage range or power source
  • Built for well-fitted joints, so gaps and poor fit-up are a weak point

Welding rods types and what each one does

Stick electrodes are classed by the code on the pack, which covers the rod’s strength, the positions it runs in and its coating. If you searched for kinds of welding electrodes, the coating is a large part of the answer: it shapes how the arc behaves and what the bead can take. The families in this guide are E6011 and E7018, and types of welding rods and their uses follow from the code on each rod.

E6011 is the fast-freeze rod for dirty steel. Its coating drives a forceful arc that welds through rust, paint, oil and galvanized coating, and the puddle freezes fast enough to weld overhead and vertical without sagging. That makes it the rod for farm repairs, fences, gates, trailers and equipment that cannot be ground clean first. The ATLAS listing states AC and DC power, and the TOOLIOM listing states AC as its main power source.

E7018 is the low-hydrogen rod for steel that carries load. Its low-hydrogen coating is made to keep hydrogen out of the bead, which helps keep cracks from starting in thick, rigid joints, as long as the rods are kept dry. It suits frames, equipment bases, structural repairs and thick plate, and it needs joints that fit well. It lays compact, uniform beads with ultra-low spatter, and it is the rod to reach for when the weld has to hold weight.

Diameter matters as much as family. The rods in this guide come in 3/32 and 1/8 inch, with pack weights of 2 lb, 5 lb, 10 lb and 12 lb. The TOOLIOM listing states 40A to 80A for its 3/32 inch rod, so check the amperage the listing states for the diameter you pick and match it to the steel in front of you.

Side by side

Rod Diameter Pack weight Length Power source
ATLAS WELDER E6011 3/32 E6011 3/32 in or 1/8 in 5 lb or 10 lb 14 in AC and DC
TOOLIOM E6011 3/32 E6011 3/32 in 2 lb 14 in AC (mainly)
Buelkmag E7018 1/8 E7018 1/8 in 12 lb 14 in Not stated

The table above lays out welding rods explained by size and pack. Check the diameter and pack weight on the listing before ordering: the Buelkmag listing states different numbers in its bullets and its title, and the TOOLIOM spec table disagrees with its own title on size. The table above follows each listing’s title and spec table, and each product review below notes where a listing disagrees with itself.

Rods for the jobs in this guide

The different kinds of welding rods in this guide cover the steps in a repair: the E6011 rods handle rusty steel and all-position work, and the E7018 rod handles load-bearing joints. The picks are ranked by Gear Score, with the strongest listing first.

How to pick the right rod

Start from the steel, not the rod. If the joint is rusty, painted, oily or galvanized and cannot be ground clean, the E6011 rods in this guide are built for it: the ATLAS listing names fences, trailers, farm equipment and gates, and the TOOLIOM listing names galvanized tanks and cast steel maintenance. If the joint carries load or the steel is thick and rigid, the E7018 rod is built for it: the Buelkmag listing names load-bearing structures, thick steel plates, equipment bases and frame fabrication. Then check the pack weight against the job list: a 2 lb pack suits a short repair list, and a 12 lb pack suits a run of structural work. Last, check the power source the listing states and the amperage range, and set the machine inside the range the listing gives.

That is welding rods types and uses in short: match the family to the steel, the diameter to the joint, and the pack to the job list. For more on the rods themselves, see the best 7018 welding rod for home shop guide and the best all around stick welding rod picks. To compare rod against wire, see welding rods vs MIG wire.

For more options, see our welding consumables guides.

FAQ for welders

What do the digits in a welding rod name mean?

The digits are the AWS classification: they mark the rod’s strength class, the positions it runs in and its coating type. In this guide, E6011 is the fast-freeze rod for dirty steel in any position, and E7018 is the low-hydrogen rod for load-bearing joints. The listings state the family on the pack, so match the family to the job before checking diameter and pack weight.

What kind of welding rod welds rusty steel?

An E6011 rod. The E6011 rods in this guide state that they weld through rust, paint, dirt and galvanized steel with less surface prep. Grind the joint where you can reach it, and check the listing for the positions and power source it states.

What is a low-hydrogen rod, and when do I need it?

A low-hydrogen rod is made to keep hydrogen out of the bead, which helps keep cracks from starting in thick, rigid steel, as long as the rods are kept dry. The Buelkmag E7018 (on Amazon) in this guide is built for load-bearing structures, thick steel plates and frame fabrication. For rusty farm repairs, the E6011 rods fit better.

What amperage should I run a 3/32 inch rod at?

There is no one figure for the size: follow the listing for the rod you hold. The TOOLIOM listing states 40A to 80A for its 3/32 inch E6011 rod. Set the machine inside the range the listing gives, and check the machine door chart or manual for the joint in front of you.

Can I use E7018 on rusty steel?

The listings in this guide point the other way. The Buelkmag E7018 is built for well-fitted joints on load-bearing steel, and it does not state rust tolerance. The E6011 rods state that they weld through rust, paint and galvanized steel, so use those where the steel cannot be cleaned first.

Related: 6013 welding rod uses, best 6013 welding rod for auto body, 7018 vs 7018-1 welding rod, and best all around stick welding rod.

More buying guides

Welding Consumables ·

Best Welding Rods Under $30 (2026)

Three welding rods under $30 compared by type, size and pack: stick electrodes for steel, from what each listing states.