Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

7018 vs 7018-1 Welding Rod: Which One Should You Buy?

Three low-hydrogen stick electrode listings, one Hobart 7018 and two TOOLIOM E7018, compared on stated diameter, amps, length and what the listings leave unclear.

7018 vs 7018-1 Welding Rod: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1TOOLIOM E7018 Welding Rod Low-Hydrogen StickTOOLIOM E7018 Welding Rod Low-Hydrogen Stick9.5/10View on Amazon
  2. 2TOOLIOM E7018 Welding Rod Low-Hydrogen StickTOOLIOM E7018 Welding Rod Low-Hydrogen Stick9.5/10View on Amazon
  3. 3Hobart 770479 7018 StickHobart 770479 7018 Stick9.4/10View on Amazon

Verdict. Pick the TOOLIOM E7018 listings if you want stated amperages and a stated 14-inch length: 115 to 165A for the 1/8-inch, 70 to 100A for the 3/32-inch, both for AC or DC. Pick the 7018 side, the Hobart 770479, if you want the long-standing US listing with a stated 70,000 PSI tensile strength, and you weld on DC or higher voltage AC, since it is not recommended for low-voltage AC welders.

A rack of stick electrodes, a fillet that has to hold, a welder that runs on AC or DC. The 7018 vs 7018-1 welding rod question comes up when the shop needs a low-hydrogen rod for structural steel and the listings start to blur together. This comparison works through three listings: one Hobart tagged to the 7018 side and two TOOLIOM listings tagged to the 7018-1 side, though both TOOLIOM titles read E7018, and shows what each listing states.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same.

The three rods

TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pound box of 1/8-inch E7018 low-hydrogen stick electrodes for AC/DC, with stated amperages of 115A to 165A and a 14-inch length.

Pros

  • Recommended amperages of 115A to 165A stated on the listing
  • AC and DC operation stated
  • 14-inch length and 10-pound box both stated
  • Structural uses named: I-beams, angles, plates, channels, piping

Cons

  • Title reads E7018 while tagged to the 7018-1 side
  • No warranty term is stated
  • No country of origin is stated
  • Feature claims such as crack resistance are maker claims
TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM E7018 Welding Rod Low-Hydrogen Stick

TOOLIOM9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pound box of 3/32-inch E7018 low-hydrogen stick electrodes for AC/DC, with stated amperages of 70A to 100A and a 14-inch length.

Pros

  • Recommended amperages of 70A to 100A stated on the listing
  • AC and DC operation stated
  • 14-inch length and 10-pound box both stated
  • Same stated features as the larger TOOLIOM in the smaller diameter

Cons

  • Title reads E7018 while tagged to the 7018-1 side
  • No warranty term is stated
  • No country of origin is stated
  • Feature claims such as crack resistance are maker claims
Hobart 770479 7018 Stick

Hobart 770479 7018 Stick

Hobart9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pound box of 1/8-inch 7018 low-hydrogen stick electrodes with a stated 70,000 PSI tensile strength, made in the USA and first listed in 2008.

Pros

  • 70,000 PSI tensile strength stated in the title
  • All-position rod for low, medium and high-carbon steels
  • Made in the USA stated on the listing
  • First listed December 31, 2008, the longest standing listing here

Cons

  • No amperage range is stated
  • Not recommended for low-voltage AC welders
  • No rod length is stated
  • No warranty term is stated

Other welders and gear to compare

7018 vs 7018-1 welding rod: side by side

Three 10-pound boxes of low-hydrogen stick electrodes, one 1/8-inch Hobart and two TOOLIOM listings in 1/8-inch and 3/32-inch. The table below lines up what each listing states, and the Edge column says where the stated specs separate them.

TOOLIOM E7018 1/8-Inch TOOLIOM E7018 3/32-Inch Hobart 770479 Edge
Gear Score 59 58 54
Diameter 1/8 in 3/32 in 1/8 in Pick per joint
Weight 10 lb 10 lb 10 lb Tie
Rod length 14 in 14 in Not stated TOOLIOM
Recommended amps 115 to 165A 70 to 100A Not stated TOOLIOM
Tensile strength Not stated Not stated 70,000 PSI Hobart
AC/DC AC and DC AC and DC Not recommended for low-voltage AC TOOLIOM
Positions All positions All positions All positions Tie
First listed April 15, 2024 April 15, 2024 December 31, 2008 Hobart longest
Warranty Not stated Not stated Not stated Tie

All specs here repeat what the maker rates and the listing prints, copied down 22 October 2026. None of the three listings states a certification or a warranty term, so safety and warranty score zero across the board.

Diameter and what it welds

The Hobart 770479 and the larger TOOLIOM are both 1/8-inch rods in 10-pound boxes, while the smaller TOOLIOM is a 3/32-inch rod in a 10-pound box. The Hobart listing describes an all-position rod for low, medium and high-carbon steels with a stated 70,000 PSI tensile strength. The TOOLIOM listings describe all-position welding for carbon and mild steel, low alloy steel and high-sulfur steel, and name structural uses such as I-beams, angles, plates, channels and process piping. See our what 7018 means guide for the classification behind the number.

Amps and machine compatibility

This is where the listings differ most. The TOOLIOM 1/8-inch lists recommended amperages of 115A to 165A and AC/DC operation, and the 3/32-inch lists 70A to 100A with AC/DC operation. The Hobart lists no amperage range at all and warns that it is not recommended for low-voltage AC welders, so check your machine before buying. The two TOOLIOM listings also list low spatter, high deposition efficiency and crack resistance as features, reported here as the maker’s claims. Our welding rod amperage chart covers the ranges the listings leave out.

Length, weight and packaging

Both TOOLIOM listings state a 14-inch length and a 10-pound box, with item weights of 10.41 and 10.17 pounds in the tables. The Hobart is a 1/8-inch, 10-pound box with a 10-pound item weight and package dimensions of 14.5 by 4.2 by 2 inches, but no rod length is stated. The TOOLIOM tables give package dimensions of 14.29 by 3.54 by 2.24 inches and 14.8 by 3.43 by 2.36 inches. Nothing here separates the sides, but the missing Hobart length is a gap in its listing.

What the listings leave out

No rod oven or storage guidance appears in any of the three listings, which matters for low-hydrogen rods; see our rod storage guide. The Hobart is listed as made in the USA and first listed on December 31, 2008, the longest standing of the three. The two TOOLIOM listings were first listed on April 15, 2024, and neither names a country of origin. Also note the tagging quirk: both TOOLIOM listings are tagged to the 7018-1 side of this comparison even though their titles read E7018, so judge them by their stated specs, not by the classification in the title.

Choose the Hobart 770479 if

  • You want a 70,000 PSI tensile strength stated on the listing.
  • You run DC or a higher voltage AC machine, since low-voltage AC is not recommended.
  • You prefer the long-standing US listing, first listed in 2008.
  • All-position work on low, medium and high-carbon steel covers your jobs.

Choose the TOOLIOM E7018 1/8-inch if

  • You want stated amperages, 115A to 165A, before you buy.
  • Your machine runs AC or DC, since the listing states both.
  • A stated 14-inch length matters to your order.
  • You weld structural shapes such as I-beams, angles and plates.

Choose the TOOLIOM E7018 3/32-inch if

  • Your work is thinner and suits 70A to 100A.
  • Your machine runs AC or DC, since the listing states both.
  • You want the same stated features in the smaller diameter.
  • The 3/32-inch size fits the joints you weld most.

FAQ for welders

What is the difference between 7018 and 7018-1 rods?

No listing here states 7018-1: both TOOLIOM titles read E7018, and the Hobart is 7018. Between these three, the differences are diameter, stated amps and machine compatibility, not a stated classification difference.

What amperage do these rods run at?

The TOOLIOM 1/8-inch lists 115A to 165A and the 3/32-inch lists 70A to 100A, both for AC or DC. The Hobart lists no amperage range and is not recommended for low-voltage AC welders, so check your machine against the listing before buying.

Can these rods weld in all positions?

All three listings state all-position capability. The Hobart names low, medium and high-carbon steels, and the TOOLIOM listings name carbon and mild steel, low alloy steel and high-sulfur steel.

How long are the rods?

The two TOOLIOM listings state a 14-inch length. The Hobart listing states no rod length, only package dimensions, which is a gap in its listing.

Do any of these listings state a warranty?

No. None of the three listings states a warranty with a concrete term, so all three score zero on warranty.

Related: best 7018 welding rod for beginners, best 7018 welding rod for vertical welding, best welding rods for mild steel, and the welding consumables hub.

Scoring, line by line

All three rods are scored on performance, build, value, safety listing and warranty, with the weights published on the How We Pick page. None of the listings states a certification or a warranty term, so all three score zero on safety and warranty, and the ranking comes from the completeness of the stated specs.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
TOOLIOM E7018 1/8-Inch 9.5 29 21 21 0 0
TOOLIOM E7018 3/32-Inch 9.5 28 21 21 0 0
Hobart 770479 9.4 26 21 19 0 0

A pick’s weighted total decides where it lands between a 9.2 floor and a 9.8 ceiling, and a bigger total never produces a smaller number.

Before you strike an arc. Wear a helmet with the right shade for stick welding, safety glasses underneath, leather gloves and flame resistant clothing. Weld with good ventilation, since stick electrodes make fumes, and clear anything flammable from the area. Keep the electrode holder insulated and the machine grounded, and store low-hydrogen rods dry. See the OSHA welding overview and our safety gear checklist for beginners.

More buying guides

Welding Consumables ·

6013 Welding Rod Specifications Explained

6013 welding rod specifications cover diameter, length, pack weight, current type, and tensile strength for mild steel rods that suit sheet metal, duct work,…

Welding Consumables ·

Best Welding Rod for Vertical Welding (2026)

Four stick electrodes for vertical welding, compared on diameter, pack weight, positions and power, from a fast-freezing E6011 to a hardfacing rod.