Best 7018 Welding Rod for Vertical Welding (2026)
Best 7018 welding rod for vertical welding: four E7018 electrodes in 3/32, 1/8 and 5/32 in compared on diameter, amperage, AWS classification and pack size.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Top pickTOOLIOM E7018 3/329.6/10View on Amazon - 2
Thickest rodForney 30910 E70189.6/10View on Amazon - 3
AWS classifiedBlue Demon 70189.5/10View on Amazon - 4
Bulk buyHYW E70189.5/10View on Amazon
For vertical welding with a 7018 rod, the TOOLIOM 3/32 in electrode is the standout pick: it states all-position capability with a 70 to 100 amp range on AC or DC, exactly what a vertical joint asks for. The best 7018 welding rod for vertical welding balances diameter against the machine you own: thinner rods at lower amps for thin material, thicker rods when the joint needs fill. This roundup compares four E7018 electrodes in 3/32, 1/8 and 5/32 in, scored on what their listings actually state.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Top pick TOOLIOM E7018 3/32: 3/32 in all-position E7018 with a stated 70 to 100 amp range and AC/DC operation. Check price on Amazon
- Thickest rod Forney 30910 E7018: 5/32 in low-hydrogen E7018 in a 10 lb pack for carbon and hard-to-weld steel. Check price on Amazon
- AWS classified Blue Demon 7018: 3/32 by 14 in with stated AWS E7018/E7018-1 classification and AC-DC operation. Check price on Amazon
- Bulk buy HYW E7018: 1/8 in E7018 in a 60 lb pack split as six 10 lb packs for shops and crews. Check price on Amazon
The machines

TOOLIOM E7018 Welding Rod Low-Hydrogen Stick
A 3/32 in E7018 electrode with stated all-position capability, 70 to 100 amp range and AC/DC operation in a 5 lb pack.
Pros
- All-position capability stated
- 70 to 100 amp range stated
- AC/DC operation stated
- Low spatter, high deposition efficiency stated
Cons
- 5 lb pack only; no bulk option
- Only 3/32 in diameter offered
- No warranty term is stated
- Thin rod limits fill per pass

Forney 30910 E7018 Welding Rod, 5/32-Inch
A 5/32 in E7018 low-hydrogen rod in a 10 lb pack, listed for smooth, high-strength welds on carbon and hard-to-weld steel.
Pros
- 5/32 in, the thickest rod here
- 10 lb pack for working shops
- Low-hydrogen formulation
- Listed for hard-to-weld steel
Cons
- No amperage range stated
- No current type stated
- No AWS classification stated
- No warranty term is stated

Blue Demon 7018 X 3/32" X 14" X 5LB plastic Low
A 3/32 by 14 in E7018 electrode with stated AWS E7018/E7018-1 classification and AC-DC operation in a 5 lb pack.
Pros
- AWS E7018/E7018-1 classification stated
- AC-DC operation stated
- 3/32 by 14 in, a standard size
- Listed for low, medium and high carbon steels
Cons
- No amperage range stated
- Package weighs 6.0 lb for 5 lb of rod
- No all-position claim stated
- No warranty term is stated

E7018 Premium Arc Welding Rods Carbon Steel 1/8"
A 1/8 in E7018 premium electrode in a 60 lb bulk pack (six 10 lb packs) for shops and crews.
Pros
- 60 lb bulk pack, the most rod here
- 1/8 in, a versatile mid diameter
- Six 10 lb packs stay manageable
- Premium carbon steel electrode
Cons
- No amperage range stated
- No current type stated
- No AWS classification stated
- 60 lb is far too much for occasional use
Other welders and gear to compare
Victory Welding Alloys 7018 Welding Rod 1/8" E7018 1/8" 5Check price on Amazon
Forney 30301 E6013 Welding RodCheck price on Amazon
Forney 30705 E7018 Welding RodCheck price on Amazon
Forney 30685 E7018 AC Welding RodCheck price on Amazon
Forney 30680 E7018 AC Welding RodCheck price on Amazon
best 7018 welding rod for vertical welding: how the picks compare
| Model | Verdict | Diameter | Pack | Current |
|---|---|---|---|---|
| TOOLIOM E7018 3/32 | Top pick | 3/32 in | 5 lb | 70-100A, AC/DC |
| Forney 30910 E7018 | Thickest rod | 5/32 in | 10 lb | Not stated |
| Blue Demon 7018 | AWS classified | 3/32 in | 5 lb (6.0 lb package) | AC/DC |
| HYW E7018 | Bulk buy | 1/8 in | 60 lb (6 x 10 lb) | Not stated |
Ratings in this table are the makers’ own claims taken from each product page (19 October 2026).
Buying guide: picking a 7018 rod for vertical welding
Diameter sets the amperage. The TOOLIOM 3/32 in rod lists 70 to 100 amps; that is the only stated amperage in the set, and it suits thin material and tight vertical joints. The 1/8 in HYW and 5/32 in Forney rods state no amperage, so check your machine’s chart before buying thick rod for thin work.
All-position is the key phrase. Vertical welding is an out-of-position joint, and the TOOLIOM listing states all-position capability outright. The other listings do not use that phrase, so they read as general-purpose E7018 rather than vertical-first picks.
AC or DC. The Blue Demon and TOOLIOM state AC-DC operation. If your machine is AC only, those two are the stated-safe choices; the Forney and HYW listings do not state current type.
AWS classification. The Blue Demon lists AWS Classification E7018/E7018-1, the only stated classification here. The rest list E7018 in the title, which is the low-hydrogen family all four belong to.
Pack size. Packs run 5 lb (TOOLIOM, Blue Demon) to 10 lb (Forney) to 60 lb in six 10 lb packs (HYW). The 60 lb HYW pack is a shop or crew quantity.
FAQ for welders
What amperage do I run for 3/32 in 7018 vertical?
The TOOLIOM listing recommends 70 to 100 amps for its 3/32 in rod. Start low in that range on thin material and work up; vertical joints punish excess heat.
Can 7018 rods run on AC?
The Blue Demon and TOOLIOM listings state AC-DC operation. The Forney and HYW listings do not state current type, so check the listing or the rod box before running them on AC.
Is 7018 an all-position rod?
The TOOLIOM listing states all-position capability, which covers vertical and overhead joints. The other listings here do not use that phrase.
Which diameter is best for vertical welding?
For learning, 3/32 in at 70 to 100 amps is the stated and forgiving choice. The 1/8 in HYW and 5/32 in Forney carry more fill per pass for thicker joints.
How much rod should I buy?
Five pounds (TOOLIOM, Blue Demon) covers practice and small projects. Ten pounds (Forney) suits a working shop; the 60 lb HYW pack is bulk for crews.
What is the difference between E7018 and E7018-1?
The Blue Demon lists AWS Classification E7018/E7018-1. The listing does not explain the suffix; the base E7018 is the low-hydrogen family all four picks belong to.
Scoring, line by line
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| TOOLIOM E7018 3/32 | 9.6 | 32 | 21 | 21 | 5 | 0 |
| Forney 30910 E7018 | 9.6 | 30 | 21 | 20 | 5 | 0 |
| Blue Demon 7018 | 9.5 | 29 | 20 | 20 | 5 | 0 |
| HYW E7018 | 9.5 | 28 | 20 | 21 | 5 | 0 |
The lowest score we show is 9.2 and the highest is 9.8; every point total is spread proportionally across that span, so extra points mean a higher figure.
Before You Strike an Arc
- Power supply: the Blue Demon and TOOLIOM state AC-DC; confirm the others against your machine before buying.
- Amperage: only the TOOLIOM states a range (70 to 100 amps for 3/32 in); set the machine to the rod, not the other way around.
- Rod storage: 7018 is a low-hydrogen rod; keep the rods dry so the flux stays that way.
- On arrival: check the diameter and pack weight against the listing, and look for damaged flux before the first bead.
Related: our best all around stick welding rod and the best welding electrode holder.




