Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best 7018 Welding Rod for Home Shop (2026): 4 Low-Hydrogen Picks

Four E7018 stick electrodes for a home shop, scored on arc performance, build, value, safety listing and warranty, from what each Amazon listing states.

Best 7018 Welding Rod for Home Shop (2026): 4 Low-Hydrogen Picks
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Forney 30686 1/8 in 10 lbBest OverallForney 30686 1/8 in 10 lb9.5/10View on Amazon
  2. 2Forney 30685 1/8 in 5 lbBest Small PackForney 30685 1/8 in 5 lb9.5/10View on Amazon
  3. 3YESWELDER 3/32 in 10 lbBest for Thin WorkYESWELDER 3/32 in 10 lb9.4/10View on Amazon
  4. 4HYW 3/32 in 50 lb CanBest Bulk BuyHYW 3/32 in 50 lb Can9.4/10View on Amazon

When the job on the bench is a cracked trailer tongue or a frame repair that has to hold, a low hydrogen 7018 rod is the usual answer. This guide scores the best 7018 welding rod for home shop use across four listings, on what each listing states: arc performance, build, value, safety listing and warranty.

WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

Quick picks

  • Best Overall Forney 30686 1/8 in 10 lb: Forney 30686 10 lb 1/8 in rod, AC and DC+ capable, with a stated 90 day warranty. Check price on Amazon
  • Best Small Pack Forney 30685 1/8 in 5 lb: Same Forney E7018 in a 5 lb 1/8 in pack, with the same stated 90 day warranty. Check price on Amazon
  • Best for Thin Work YESWELDER 3/32 in 10 lb: YESWELDER 3/32 in 10 lb rod with a stated 70 to 100 A range for thinner material. Check price on Amazon
  • Best Bulk Buy HYW 3/32 in 50 lb Can: HYW 50 lb steel can of 3/32 in E7018 for shops that burn a lot of rod. Check price on Amazon

The machines

Forney 30686 E7018 AC Welding Rod, 1/8-Inch

Forney 30686 E7018 AC Welding Rod, 1/8-Inch

Forney9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The Forney 30686 is a 1/8 in E7018 AC rod in a 10 lb pack, suited to AC machines including low open circuit voltage units, with a stated 90 day warranty.

Pros

  • 1/8 in E7018 low hydrogen rod, AC capable and usable on DC+ per the bullets
  • Stated to perform well with low open circuit voltage power sources
  • Light spatter and self cleaning slag, easy restriking
  • 90 day warranty against manufacturer defects

Cons

  • 1/8 in diameter only, no 3/32 option in this listing
  • 10 lb is a lot of rod for the welder who strikes an arc rarely
Forney 30685 E7018 AC Welding Rod, 1/8-Inch

Forney 30685 E7018 AC Welding Rod, 1/8-Inch

Forney9.5/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

The same Forney E7018 AC rod as its bigger sibling, in a 5 lb 1/8 in pack for lighter use, with the same stated 90 day warranty.

Pros

  • Same E7018 AC low hydrogen rod, all position, usable on AC or DC+
  • 5 lb pack suits the welder who burns rod slowly
  • Easy restriking, light spatter and self cleaning slag per the bullets
  • 90 day warranty against manufacturer defects

Cons

  • No amperage stated in the title or bullets
  • The 5 lb pack runs out faster in a busy shop
YESWELDER E7018 3/32'' 10LB Welding Rods Stick

YESWELDER E7018 3/32'' 10LB Welding Rods Stick

YESWELDER9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3/32 in E7018 low hydrogen rod in a 10 lb pack from YESWELDER, with a stated 70 to 100 amp range for thinner material.

Pros

  • 3/32 in diameter with a stated 70 to 100 A range
  • All position on AC or DC reverse polarity
  • Stated steady arc, low spatter and high deposition efficiency
  • 14 in rod length, as stated in the listing

Cons

  • No warranty term is stated in the listing
  • 10 lb is a lot of 3/32 in rod for occasional work
  • The application list leans industrial, not home shop
  • No stated fit for the 1/8 in work most home shops do
50 lb Steel Can E7018 3/32" Stick electrodes

50 lb Steel Can E7018 3/32" Stick electrodes

HYW Products9.4/10 Gear Score
i
The Gear Score runs from 9.2 to 9.8 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 50 lb steel can of 3/32 in E7018 stick electrodes from HYW Products, for shops that burn a lot of rod.

Pros

  • 50 lb steel can, the largest pack here by far
  • AWS A 5.1-04 E7018 classification stated
  • 3/32 in diameter, 14 in length
  • Ships in a steel can rather than a cardboard box

Cons

  • Sparse listing: few facts beyond size, weight and classification
  • No warranty term is stated
  • No stated amperage or current type

Other welders and gear to compare

Spec sheet comparison

Model Gear Score Diameter Pack Current Stated amperage Warranty
Forney 30686 1/8 in 10 lb 9.5/10 1/8 in 10 lb AC, also DC+ Not stated 90 days
Forney 30685 1/8 in 5 lb 9.5/10 1/8 in 5 lb AC, also DC+ Not stated 90 days
YESWELDER 3/32 in 10 lb 9.4/10 3/32 in 10 lb AC or DC reverse polarity 70 to 100 A None stated
HYW 3/32 in 50 lb Can 9.4/10 3/32 in 50 lb Not stated Not stated None stated

These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 19 October 2026.

Buying guide: what matters in the best 7018 welding rod for home shop use

Rod diameter

The two Forney rods are 1/8 in, the size for general repair and heavier joints. The YESWELDER and HYW rods are 3/32 in, which suits thinner material and lower heat. Pick the diameter that matches the work you do most; YESWELDER states 70 to 100 amps for its 3/32 in rod. Neither HYW nor Forney states an amperage range in the fields this guide trusts, which is one reason the YESWELDER rod earns points for its stated range.

Pack size

Forney sells the 30685 in a 5 lb pack and the 30686 in a 10 lb pack, so the welder who strikes an arc on weekends can buy small while a regular shop buys the 10 lb pack. The HYW 50 lb steel can is for shops that burn rod daily. Opened 7018 absorbs moisture from shop air, so buy only what you will use before the rods go stale.

AC machines and low open circuit voltage

Both Forney listings state good performance with low open circuit voltage power sources, and both run on AC or DC+. The YESWELDER rod runs on AC or DC reverse polarity. If your machine is an older AC unit, that stated AC compatibility matters more than any other feature here.

Keeping 7018 dry

Low hydrogen flux does its job only when the rods stay dry. Keep them in the original packaging or a sealed container, and read our guide on how to store 7018 rods without a rod oven.

What 7018 means

The number on the rod is a classification, not a brand. For a plain explanation of what the digits stand for, read what 7018 means on a welding rod.

Read the listing, then read it again

Both Forney listings in this guide have spec tables that describe a different product, an E6010 pipe electrode, while the titles and bullets describe the E7018 rod you are buying. That is why this guide scores from the title and bullets and flags the contradiction in each review. When a listing disagrees with itself, trust the title and the bullet list, and treat the spec table as suspect.

Use as directed. Keep the weld area clear of anything that can burn, since spatter and hot slag travel. Check cables and the electrode holder before you weld, keep the work dry, and never exceed the amperage your machine and leads are rated for.

Before You Strike an Arc

  • Match the rod to the machine: the Forney rods suit low open circuit voltage AC sources per their listings, and the YESWELDER rod suits AC or DC reverse polarity.
  • Set the machine per the listing: YESWELDER states 70 to 100 amps for its 3/32 in rod; the other three listings state no amperage, so start with the machine’s own door chart.
  • Check the rods on arrival: the flux coating should be intact and dry, with no chips or cracks.
  • Keep opened packs sealed between sessions; moisture is the enemy of low hydrogen rods.
  • Clamp the ground to clean, bare metal on the workpiece.

FAQ for welders

Can I run 7018 rods on an AC welder?

Yes, for three of the four rods here. Both Forney listings state use on AC current and good performance with low open circuit voltage sources, which covers older AC machines, and both state use on DC+ as well. The YESWELDER rod states use on AC or DC reverse polarity. Only the HYW listing states no current type.

What amperage should I run 3/32 in 7018 at?

YESWELDER states 70 to 100 amps for its 3/32 in rod. The other three listings state no amperage in their titles or bullets, so check the machine door chart and lay a bead on scrap first, then adjust from there.

How should I store 7018 rods without a rod oven?

Keep them dry and sealed: the original packaging or a sealed container between sessions. Moisture ruins the low hydrogen flux.

Is 1/8 in or 3/32 in 7018 better for a home shop?

It depends on the work. The 1/8 in Forney rods suit general repair and heavier joints, while the 3/32 in YESWELDER and HYW rods suit thinner material. Buy the size that matches the metal you weld most.

Do any of these rods come with a warranty?

Two of them do. Both Forney rods state a 90 day warranty against manufacturer defects. The YESWELDER and HYW listings state no warranty term.

Related: best 7018 welding rod for vertical welding, what amperage for 1/8 7018 rod, welding rods guide, and the welding consumables hub.

Scoring, line by line

Each rod is scored out of 10 on performance, build, value, safety listing and warranty, with the weights published on our How We Pick page. None of these listings states a safety certification, so every rod here scores zero on that criterion; the ranking comes from the other four.

Product Gear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Forney 30686 1/8 in 10 lb 9.5 29 21 21 0 3
Forney 30685 1/8 in 5 lb 9.5 29 21 20 0 3
YESWELDER 3/32 in 10 lb 9.4 28 20 20 0 0
HYW 3/32 in 50 lb Can 9.4 26 19 20 0 0

Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score.

More buying guides

Welding Tables and Carts ·

Best Welding Vise for Home Shop (2026)

Five bench vises for a home welding shop, compared on jaw width and opening, clamping force, swivel, anvils and the warranty each listing states.

Welders ·

Best Welding Cable for Home Shop (2026)

Five copper welding cables for a home shop, compared on gauge, length, voltage, jacket and stranding, scored from what each listing states.