Size of Welding Rod: Diameter Chart by Process
Rod diameter follows the metal and the joint, and this guide compares 3/32 and 1/8 inch stick electrodes on diameter, length, weight and stated amperage.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YESWELDER E7018 3/32" 2.5lb +1/8" 2.5lb Welding9.5/10View on Amazon - 2
YESWELDER E308L-16 Stick Electrodes 14" x 3/32"9.5/10View on Amazon - 3
ENi-CI 15pcs 99-Percent Nickel Cast Welding9.4/10View on Amazon - 4
YesRight 1/8" Welding Rods J422 Carbon Steel Stick9.4/10View on Amazon
A cracked cast iron bracket, a stainless sink repair and a farm gate that needs a fresh bead all start the same way: the rod in the stinger has to match the metal on the bench. Size of welding rod is the question that decides which diameter to reach for, and this guide compares the sizes in these listings.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

YESWELDER E7018 3/32" 2.5lb +1/8" 2.5lb Welding
A low-hydrogen E7018 set with 3/32 and 1/8 inch rods, 14 inch length, 5 lb total, and a stated amperage of 115-165A.
Pros
- Two diameters in one set: 3/32 and 1/8 inch
- Stated amperage of 115-165A
- Low-hydrogen electrode for all positions, AC or DC reverse polarity
- 14 inch length, 5 lb total
Cons
- No warranty term is stated
- No certification is stated
- No per-diameter amperage is stated
- No shelf life or storage guidance is stated

YESWELDER E308L-16 Stick Electrodes 14" x 3/32"
A stainless E308L-16 rod at 3/32 inch, 14 inches long, 5 lb, with a self-peeling slag.
Pros
- Stated for stainless steel, including unstabilized stainless
- Self-peeling slag, smooth arc and low spatter
- 14 inch length, 5 lb
- All position welding stated
Cons
- No warranty term is stated
- No certification is stated
- No amperage range is stated
- 3/32 inch only in this listing

ENi-CI 15pcs 99-Percent Nickel Cast Welding
A 99-percent nickel cast iron rod at 3/32 inch by 12 inches, 15 pieces and 0.6 lb, for gray and ductile iron repair.
Pros
- 99-percent nickel for cast iron, per the title
- Meets AWS A5.15, EN ISO 1071 and GB/T10044, per the listing
- Soft, machinable weld metal, per the listing
- Cold or low-temperature preheat deposition stated
Cons
- The bullets name Ni 55 beside a 99-percent nickel title
- 0.6 lb pack, the smallest here
- No warranty term is stated
- No amperage range is stated

YesRight 1/8" Welding Rods J422 Carbon Steel Stick
A 1/8 inch carbon steel J422 rod, 1 lb in a sealed tube of 16 sticks, for all position welding on AC power.
Pros
- 1/8 inch mild-steel electrode for all positions on AC power
- 16 sticks in a sealed plastic tube for long-term storage
- Deep penetration and fast freezing, per the listing
- Stated for dirty, rusty and painted materials
Cons
- The listing names circuit boards and electronic equipment among uses
- No warranty term is stated
- No certification is stated
- No amperage range is stated
Size of Welding Rod: What the Diameter Decides
Rod diameter decides how much metal the arc lays down and how the puddle behaves. The listings here cover 3/32 and 1/8 inch rods, and the table below puts them side by side.
Diameter is only part of the choice. Length, weight, metal and the stated amperage all shape which rod fits the job.
Rod Sizes Side by Side
| YESWELDER E7018 | YESWELDER E308L-16 | Fox Alloy ENi-CI | YesRight J422 | |
|---|---|---|---|---|
| Diameter | 3/32 in + 1/8 in | 3/32 in | 3/32 in | 1/8 in |
| Length | 14 in | 14 in | 12 in | Not stated |
| Weight | 5 lb | 5 lb | 0.6 lb | 1 lb |
| Metal | Carbon steel | Stainless steel | Cast iron | Carbon steel |
| Amperage | 115-165A | Not stated | Not stated | Not stated |
| Gear Score | 61 | 59 | 57 | 56 |
Read the table by metal first, then by diameter. The cast iron rod is for cast iron, the stainless rod is for stainless, and the carbon steel rods cover general shop work.
3/32 Inch Rods
The 3/32 inch rods here are the Fox Alloy cast iron (on Amazon) rod, the YESWELDER E308L-16 stainless rod, and the YESWELDER E7018 set, which also holds 1/8 inch rods. The Fox Alloy listing names thin-section welding for its 3/32 inch rod, and the E308L-16 and E7018 listings state all position welding.
The E7018 set states 115-165A for the set, and the other listings state no amperage range. The 3/32 vs 1/8 welding rod comparison covers the two diameters in more depth.
1/8 Inch Rods
The 1/8 inch rods here are the YesRight J422 (on Amazon) and the 1/8 inch half of the YESWELDER E7018 set. The J422 is a mild-steel rod for AC power, and the E7018 is a low-hydrogen rod for AC or DC reverse polarity. Both state all position welding.
The J422 listing states deep penetration and fast freezing on dirty, rusty and painted materials, and the E7018 listing states high deposition efficiency. For more on the E7018, see the best 7018 welding rod for beginners guide.
Amperage and Length
Only the E7018 set states an amperage range: 115-165A. The other listings state no amperage, so check the machine’s door chart or manual before striking an arc.
Length is stated at 14 inches for the YESWELDER rods and 12 inches for the Fox Alloy rod, while the YesRight listing states no length. Weight is 0.6 lb for the Fox Alloy pack, 5 lb for the YESWELDER rods, and 1 lb for the YesRight tube.
Size of Welding Rod for the Shop
The rods below cover the sizing work in this guide: cast iron, stainless and carbon steel, in 3/32 and 1/8 inch.
Common Mistakes to Avoid
- Choosing a rod by diameter alone, without checking the metal.
- Running a carbon rod on cast iron, or a cast iron rod on stainless.
- Skipping the stated amperage, then finding the machine cannot run the rod.
- Storing rods loose in damp air.
Size of Welding Rod: The Short Version
- Name the metal before buying: cast iron, stainless or carbon steel.
- Match the diameter to the joint.
- Check the length, the weight and the stated amperage.
- Check the process and polarity the listing states.
FAQ for welders
What size welding rod do I need for thin metal?
The listings here state 3/32 and 1/8 inch diameters. The Fox Alloy listing names thin-section welding for its 3/32 inch cast iron rod. Match the rod to the metal as well as the thickness.
What is the difference between 3/32 and 1/8 inch rods?
The 3/32 inch rod is the smaller diameter, and the 1/8 inch rod is the larger one. Both diameters appear in these listings. The E7018 set holds both: 3/32 inch at 2.5 lb and 1/8 inch at 2.5 lb.
What amperage do these rods run at?
Only the E7018 set states an amperage range: 115-165A. The other listings state no amperage. Check the machine’s door chart or manual for the rod and metal.
Can I weld cast iron with a carbon steel rod?
The listings here keep the metals separate: the Fox Alloy ENi-CI is the cast iron rod, and the J422 and E7018 are carbon steel rods. Use the rod the listing names for the metal.
How long are these welding rods?
The YESWELDER rods are 14 inches long, the Fox Alloy rod is 12 inches long, and the YesRight listing states no length.
Related: the welding consumables hub, stick welders hub and best welder for beginners. Also see the 3/32 vs 1/8 welding rod comparison and the 308 vs 308L welding rod comparison.




