MIG Welding Nozzle Sizes Chart
MIG welding nozzle sizes come down to orifice, recess and gun fit, and this guide lines up the sizes the listings state with four nozzles for common MIG guns.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
WeldingCity 5-pk Gas Nozzle 22-50 1/2" for Lincoln9.6/10View on Amazon - 2
STARTECHWELD 23-62 Mig Welding Nozzles 5/8"9.6/10View on Amazon - 3
5PK Mig Gun Nozzle 169725 5/8“ 15.9mm Recess 1/8”9.6/10View on Amazon - 4
5PK Mig Welding Nozzle NS-5818C Centerfire Slim9.4/10View on Amazon
A MIG gun that sputters, spatters or leaves a dirty bead can point at the nozzle, not the welder. The nozzle shapes the gas around the puddle, and the wrong size leaves the weld open to air. MIG welding nozzle sizes come down to the orifice at the mouth, the recess of the tip inside it, and whether the nozzle fits the gun in your hand. This guide lines up the sizes the listings state and four nozzles that cover them.
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.

WeldingCity 5-pk Gas Nozzle 22-50 1/2" for Lincoln
A 1/2 inch nozzle for Lincoln 200-250 and Tweco Professional #2 guns, with 3/8, 1/2 and 5/8 inch orifices listed and a 250-amp rating.
Pros
- Three orifice sizes listed: 3/8, 1/2 and 5/8 inch
- Rated for guns up to 250-amp
- Fits Lincoln 200-250 and Tweco Professional #2 guns
- Pack of 5 nozzles
Cons
- No recess measurement is stated
- No material is stated
- No warranty term is stated
- Needs insulator 32 to set the tip-to-nozzle distance

STARTECHWELD 23-62 Mig Welding Nozzles 5/8"
A 5/8 inch red copper nozzle for Tweco 2, 3 and 4 and Lincoln Magnum 200, 300 and 400 guns, sold in a pack of 5.
Pros
- Red copper material, insulated
- Fits Tweco 2, 3 and 4 and Lincoln Magnum 200, 300 and 400 guns
- Used with 52FN gas diffuser
- Pack of 5 nozzles
Cons
- Only the 5/8 inch orifice is stated
- No recess measurement is stated
- No warranty term is stated
- No amp rating is stated

5PK Mig Gun Nozzle 169725 5/8“ 15.9mm Recess 1/8”
A 5/8 inch nozzle with 1/8 inch recess for Miller Millermatic M25 and M40 guns, sold in a pack of 5.
Pros
- 5/8 inch orifice, 15.9 mm, with 1/8 inch recess
- Fits Miller Millermatic 200 and 250 with M25 and M40 guns
- Pack of 5 nozzles
- Matches Miller part 169725
Cons
- Only the 5/8 inch orifice is stated
- No material is stated
- No amp rating is stated
- Fits Miller M25 and M40 guns only

5PK Mig Welding Nozzle NS-5818C Centerfire Slim
A slim 5/8 inch Centerfire nozzle with 1/8 inch recess for Bernard MIG guns.
Pros
- 5/8 inch orifice with 1/8 inch recess stated
- Slim Centerfire body for Bernard guns
- Made for Bernard MIG guns
- Model NS-5818C stated for matching to a Bernard gun
Cons
- Only the 5/8 inch orifice is stated
- No material is stated
- No amp rating is stated
- Fits Bernard guns only, so check your gun first
MIG welding nozzle sizes at a glance
The listings in this guide state three orifice sizes: 3/8, 1/2 and 5/8 inch. The 1/2 inch size comes from the WeldingCity 22-50 (on Amazon), which also lists 3/8 and 5/8 inch orifices, while the other three nozzles state 5/8 inch. Both Hasweld nozzles state a 1/8 inch recess. The size on the box is the orifice, the opening at the mouth of the nozzle, and the recess is how far the contact tip sits back from the end of the nozzle. For the full range of shapes, see the MIG welding nozzle types guide.
- 3/8 inch: the smallest orifice listed here, named by WeldingCity for the 22-50.
- 1/2 inch: the size on the WeldingCity 22-50 box, for Lincoln 200-250 and Tweco Professional #2 guns.
- 5/8 inch: the size on the other three nozzles, and a second size WeldingCity lists for the 22-50.
Match the nozzle to your gun
A nozzle only fits when it matches the gun, the diffuser and the insulator the gun uses. The four nozzles here cover different gun fits: Miller Millermatic M25 and M40, Bernard Centerfire, Tweco 2, 3 and 4, Lincoln Magnum 200, 300 and 400, and Lincoln 200-250 and Tweco Professional #2. Check the model on your gun against the fitment the listing states before ordering, and check the diffuser and insulator too: the STARTECHWELD 23-62 (on Amazon) is used with a 52FN gas diffuser, and the WeldingCity 22-50 slides over insulator 32. The names and functions of each part are in the MIG welding gun parts guide, and the consumables that wear with the nozzle are in MIG welder replacement parts.
How recess and orifice work together
Orifice sets the width of the gas cover at the mouth, and recess sets where the tip ends inside the nozzle. Both Hasweld nozzles state the same pair, 5/8 inch orifice with 1/8 inch recess, for different guns: Miller M25 and M40 on the 169725, Bernard Centerfire on the NS-5818C. The other two listings state no recess, so the buyer matches them on orifice and gun fit alone. When a listing states no recess, the maker of the 22-50 points to the MIG welding gun user manual for selection of the correct gas nozzle.
Side by side
| WeldingCity 22-50 | STARTECHWELD 23-62 | Hasweld 169725 | Hasweld NS-5818C | |
|---|---|---|---|---|
| Orifice | 1/2 in | 5/8 in | 5/8 in | 5/8 in |
| Other orifices listed | 3/8, 5/8 in | Not stated | Not stated | Not stated |
| Recess | Not stated | Not stated | 1/8 in | 1/8 in |
| Fits | Lincoln 200-250, Tweco #2 | Tweco 2, 3, 4; Lincoln Magnum 200, 300, 400 | Miller M25, M40 | Bernard |
| Pack | 5 | 5 | 5 | 5 |
| Amp rating | Up to 250-amp | Not stated | Not stated | Not stated |
Where a listing states no amp rating, the table says so.
Nozzles that cover these sizes
Each nozzle below handles one part of the sizing job: orifice, recess, gun fit or pack size, so match the size and the gun before ordering.
FAQ for welders
What does the size on a MIG welding nozzle mean?
The size is the orifice, the opening at the mouth of the nozzle. The listings in this guide state 3/8, 1/2 and 5/8 inch orifices, with 5/8 inch on three of the four nozzles and 1/2 inch on the WeldingCity 22-50, which also lists 3/8 and 5/8 inch. Match the orifice to the nozzle your gun takes, not to a size that looks close.
What is the 1/8 inch recess on a MIG nozzle?
Recess is how far the contact tip sits back from the end of the nozzle. Both Hasweld nozzles in this guide state a 1/8 inch recess: the 169725 for Miller M25 and M40 guns, and the NS-5818C for Bernard guns. The other two listings state no recess, so check the gun manual for the tip position on those guns.
Can I use a 5/8 inch nozzle on any MIG gun?
No. A 5/8 inch orifice fits the guns its listing names, and the guns differ: the Hasweld 169725 (on Amazon) fits Miller Millermatic M25 and M40 guns, the Hasweld NS-5818C (on Amazon) fits Bernard guns, and the STARTECHWELD 23-62 fits Tweco 2, 3 and 4 and Lincoln Magnum 200, 300 and 400 guns. The WeldingCity 22-50 also lists a 5/8 inch orifice, for Lincoln 200-250 and Tweco Professional #2 guns. Check the gun model first, then the size.
How do I know which nozzle fits my Lincoln gun?
Match the gun model to the listing. The WeldingCity 22-50 fits Lincoln 200-250 guns and Tweco Professional #2 guns, and the maker lists it as compatible with gas nozzles KP22 and KP22-SS in Lincoln 200-250 guns. The STARTECHWELD 23-62 fits Lincoln Magnum 200, 300 and 400 guns. A Lincoln 200-250 gun and a Lincoln Magnum gun take different nozzles, so the model matters more than the brand.
Do MIG nozzles come in packs?
All four listings here state a pack of 5 nozzles: the Hasweld 169725, the Hasweld NS-5818C, the STARTECHWELD 23-62 and the WeldingCity 22-50. The WeldingCity 22-50 also comes in a 2-pack, so check the pack count on the listing before ordering.
Related: MIG welding contact tips, M6 vs M8 contact tip, MIG welding wire size, MIG welding amperage chart, and the welding consumables hub. Also see the best MIG welding nozzle picks.




