M6 vs M8 Contact Tip: Which One Should You Buy?
M6 and M8 name the thread on a contact tip, and the tip must match the thread in your torch. How the 4 M6 tips here differ, and how to tell which thread you need.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
YESWELDER 25-Pk MIG Contact Tips 11-359.6/10View on Amazon - 2
STARTECHWELD 1435 Mig Welding Contact Tips .035" 14-359.6/10View on Amazon - 3
.035 Nozzle Contact Tip Diffuser Kit & Flux Core Gasless9.5/10View on Amazon - 4
RIVERWELD 24KD MIG Contact Tips M6 .040" 1.0mm 140.0242 20pcsView on Amazon - 5
RIVERWELD 24KD MIG Contact Tips M6 .030" 0.8mm 140.0051 20pcsView on Amazon - 6
RIVERWELD 24KD MIG Contact Tips M6 .045" 1.2mm 140.0379 20pcsView on Amazon - 7
RIVERWELD 24KD MIG Contact Tips M6 140.0169 .035" 0.9mm 20pcsView on Amazon - 8
Welding Knight MIG Welding Contact Tips with Non-StickView on Amazon - 9
STARTECHWELD 14116 Mig Welding Contact Tips 1/16" 14-116View on Amazon
M6 vs M8 contact tip is a thread question, not a quality question: the tip must match the thread in your torch, and the wrong thread will not fit at all. Every tip in this guide is an M6 tip, and no M8 tip is among the picks, so if your torch takes an M8 thread, none of these fit. This guide shows what the M6 tips here state, and how to tell which thread your torch takes.
Other welders and gear to compare
RIVERWELD 24KD MIG Contact Tips M6 .040" 1.0mm 140.0242 20pcsCheck price on Amazon
RIVERWELD 24KD MIG Contact Tips M6 .030" 0.8mm 140.0051 20pcsCheck price on Amazon
RIVERWELD 24KD MIG Contact Tips M6 .045" 1.2mm 140.0379 20pcsCheck price on Amazon
RIVERWELD 24KD MIG Contact Tips M6 140.0169 .035" 0.9mm 20pcsCheck price on Amazon
Welding Knight MIG Welding Contact Tips with Non-StickCheck price on Amazon
STARTECHWELD 14116 Mig Welding Contact Tips 1/16" 14-116Check price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
M6 vs M8 contact tip: the difference in one paragraph
M6 and M8 name the thread on the contact tip. The thread on the tip must match the thread in the torch, so a tip with the wrong thread will not screw in. The 4 tips in this guide all state an M6 thread, and each fits the torches its own listing names: all 4 name MB15 15AK torches, and the Welding Knight and Generic tips also name the Lincoln Magnum 100L and Tweco No.1 and Mini guns. Wire size is the second check: the tips here state 0.030 inch or 0.035 inch wire, and the tip must match the wire on your spool.
Side by side
| Tip | Thread | Wire size | Torch fit |
|---|---|---|---|
| Welding Knight 15AK 0.030 in 30-pk | M6 | 0.030 in | MB15 15AK, Lincoln Magnum 100L, Tweco No.1 and Mini |
| GZTIGWELD 15AK 0.035 in 20pk | M6 | 0.035 in, 0.9 mm | MB-15AK |
| RIVERWELD 15AK 0.030 in 18pcs kit | M6 | 0.030 in, 0.8 mm | MB15 |
| Generic MB15 15AK 0.030 in combo | M6 | 0.030 in, 0.8 mm | Tweco Mini and No.1, Lincoln Magnum 100L K530 |
Thread is the first check, wire size the second: every tip here states an M6 thread, so match the thread to your torch and the wire size to the wire on your spool.
The M6 tips in this guide
Welding Knight 15AK 0.030 in 30-pk. A pack of 30 copper contact tips, 0.030 inch, with an M6 thread and a stated length of 24 mm, about 0.945 inch. The listing states fit for Lincoln Magnum 100L and Tweco No.1 and Mini guns, and for 14AK and 15AK torches, with 11-series contact tips. The maker states high-quality copper, with good conductivity, high temperature resistance and wear resistance.
GZTIGWELD 15AK 0.035 in 20pk. A pack of 20 copper contact tips, 0.035 inch, 0.9 mm, with an M6 thread and a 25 mm length. It is the only 0.035 inch tip here, and it states fit for the MB-15AK MIG/MAG torch.
RIVERWELD 15AK 0.030 in 18pcs kit. A kit with 10 contact tips, 0.030 inch, 0.8 mm, M6, plus 5 shield cups, 2 tip holder-diffusers and 1 plate, for the MB15 torch. The kit lists part numbers 140.0059, 002.0078, 145.0075 and 191.0001.
Generic MB15 15AK 0.030 in combo. An 18-piece set of contact tips, gas nozzles, gas diffusers and a wrench for AK15 torches. The tips are 0.030 inch, 0.8 mm, M6, in high quality copper, and the set states fit for Tweco Mini and No.1 and Lincoln Magnum 100L K530 series guns.
When M6 is the right choice
- Your torch is an MB15 15AK, a Lincoln Magnum 100L or a Tweco No.1 or Mini. All 4 tips state fit for MB15 15AK torches; the Welding Knight and Generic tips also state fit for the Lincoln Magnum 100L and Tweco No.1 and Mini guns.
- You run 0.030 inch wire. The Welding Knight, RIVERWELD and Generic tips fit 0.030 inch wire, 0.8 mm.
- You run 0.035 inch wire. The GZTIGWELD tip fits 0.035 inch wire, 0.9 mm.
- You want a pack of tips, not a kit. The Welding Knight brings 30 tips, and the GZTIGWELD brings 20.
- You want the spares in one box. The RIVERWELD kit adds shield cups, tip holders and a plate, and the Generic combo adds nozzles, diffusers and a wrench.
When M8 is the right choice
- Your torch takes an M8 thread. Thread decides the buy, and none of the tips in this guide fit an M8 thread.
- The tip you run now states M8. Check the thread on the tip you run now, and buy the same thread.
- You need a tip for an M8 torch. Buy an M8 tip for that torch; the M6 tips here will not screw in.
How to tell which thread your torch takes
Check the torch, not the tip. Look for these in the torch listing or manual:
- Explicit M6 or M8. The listings here state the thread as M6, and the GZTIGWELD states M6 by 25 mm.
- The torch model. MB15 15AK torches take the M6 tips here, per their listings; the Lincoln Magnum 100L and the Tweco No.1 and Mini guns take the Welding Knight and Generic tips, per their listings.
- The wire size. A 0.030 inch tip fits 0.030 inch wire, and a 0.035 inch tip fits 0.035 inch wire, so match the tip to the wire on your spool.
When in doubt, check the tip you run now: its thread is the thread your torch takes.
Wire size: 0.030 or 0.035 inch
Wire size decides the tip as much as thread does. The Welding Knight, RIVERWELD and Generic tips state 0.030 inch, 0.8 mm, and the GZTIGWELD states 0.035 inch, 0.9 mm. Match the tip to the wire on your spool: a 0.030 inch tip for 0.030 inch wire, and a 0.035 inch tip for 0.035 inch wire.
Can one tip fit both threads?
No. An M6 tip fits an M6 thread, and an M8 tip fits an M8 thread. The 4 tips in this guide are all M6, so a torch that takes M8 needs an M8 tip, and a torch that takes M6 takes any of the tips here that match its model and wire size.
Use as directed. A contact tip runs hot, so let it cool before you touch it, wear eye protection when you change it, and keep hands clear of the wire feed. See the OSHA welding overview.
FAQ for welders
Can I use an M6 tip in an M8 torch?
No. The thread on the tip must match the thread in the torch, and an M6 tip will not fit an M8 thread. Buy the thread your torch takes: the 4 tips in this guide are all M6, so none of them fit an M8 torch.
What wire size fits a 0.030 inch contact tip?
A 0.030 inch tip fits 0.030 inch wire, 0.8 mm. The Welding Knight, RIVERWELD and Generic tips here state 0.030 inch, 0.8 mm, while the GZTIGWELD states 0.035 inch, 0.9 mm.
Do these tips fit a Lincoln Magnum 100L?
The Welding Knight and Generic tips state fit for the Lincoln Magnum 100L, and the Generic set also states the K530 series. The GZTIGWELD states fit for the MB-15AK torch, and the RIVERWELD states fit for the MB15 torch.
How many tips come in a pack?
The Welding Knight brings 30 tips, and the GZTIGWELD brings 20. The RIVERWELD kit brings 10 tips with shield cups, tip holders and a plate, and the Generic combo brings 18 pieces of tips, nozzles, diffusers and a wrench.
Related: MIG welding contact tips, MIG welder replacement parts, MIG welding gun parts, MIG welding wire size, best flux core welder, best welder for beginners, and the welding consumables hub.




