308 vs 308l Welding Rod: Which One Should You Buy?
308L is the low-carbon stainless grade, and this guide compares its TIG rods and stick electrodes by carbon cap, shielding gas, diameters, lengths, and shop uses.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Victory Welding Alloys 6010 Welding Rod 5/32" E6010 5/32" 59.6/10View on Amazon - 2
50 lb Steel Can E6010 5/32" Stick electrodes welding rod9.6/10View on Amazon - 3
Forney 31105 E6011 Welding Rod9.6/10View on Amazon - 4
5-Lb ER308L Stainless Steel 308 TIG Welding Rod 1/16"x36"View on Amazon - 5
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/16"x16"View on Amazon - 6
ER308LView on Amazon - 7
ARCCAPTAIN Stainless Steel TIG Welding Rod ER308LView on Amazon - 8
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/8"x16" 5LBView on Amazon - 9
Forney 30301 E6013 Welding RodView on Amazon
A stainless repair on the bench, a food cart frame, a dairy tank patch, or a chemical tank seam all raise the same question: 308 vs 308l welding rod, which grade belongs on the job. The direct answer is that 308L is the low-carbon grade. The TIG listings cap 308L carbon at 0.03 percent to protect resistance to intergranular corrosion, while the stick electrode listing caps its carbon at 0.04 percent. All four products featured in the gear section below are 308L rods or electrodes, so this guide compares the low-carbon grade in its TIG and stick forms and explains what to look for when choosing between them.
Other welders and gear to compare
5-Lb ER308L Stainless Steel 308 TIG Welding Rod 1/16"x36"Check price on Amazon
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/16"x16"Check price on Amazon
ER308LCheck price on Amazon
ARCCAPTAIN Stainless Steel TIG Welding Rod ER308LCheck price on Amazon
YESWELDER Stainless Steel TIG Welding Rod ER308L 1/8"x16" 5LBCheck price on Amazon
Forney 30301 E6013 Welding RodCheck price on Amazon
This guide links to our product roundups, where WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
308 vs 308l welding rod: what the L means
The L marks the low-carbon version of the grade. WeldingCity states carbon held to a maximum of .03 percent to reduce the possibility of intergranular carbide precipitation. YESWELDER states a low carbon content of 0.03 percent maximum that increases weld metal resistance to intergranular corrosion. The SÜA TIG listing states a maximum carbon content of less than 0.03 percent that preserves the intergranular corrosion resistant properties of the weld deposit and weld zone. The SÜA stick listing states a 0.04 percent maximum carbon content with the same stated purpose. In these listings, that carbon cap is what the L is about: it guards the corrosion resistance of the weld and the zone beside it.
That cap matters most where the weld faces corrosion, heat, or food and chemical service. The listings name stainless steel 304, 304L, 308, 308L, 321, and 347 as base metals for the TIG rods, and 304L plus stabilized grades 321 and 347 for the stick electrode. Common applications named across the listings include dairy, food, and restaurant equipment, chemical tanks, petrochemical work, pressure vessels, food processing machinery, and medical equipment, plus general-purpose work where corrosion is moderate and work at cryogenic temperatures.
Side by side
| TIG rods | Stick electrodes | In this guide | |
|---|---|---|---|
| Process | TIG welding (GTAW) | All-position stick welding | TIG rods: 3 products; stick: 1 product |
| Carbon cap | 0.03 percent or less | 0.04 percent maximum | Lower cap on the TIG rods |
| Diameters listed | Across the rods: 0.030 inch, 0.035 inch, 0.045 inch, 1/16 inch, 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch | 3/32 inch, 1/8 inch | Widest range on the SÜA TIG rod |
| Rod length | Across the rods: 36 inches and 16 inches | 12 inches and 14 inches | Longest rods are 36 inches |
| Packages listed | Across the rods: 1 Lb, 2 Lb, 5 Lb, 10 Lb | 0.5 Lb, 2 Lb, 4.4 Lb | Smallest package is 0.5 Lb |
| Shielding | 100 percent argon, or argon and helium | Self-peeling slag stated; no gas stated | Gas needed for TIG only |
| Base metals named | 304, 304L, 308, 308L, 321, 347 | 304L, 321, 347 | Widest list on the TIG rods |
| Typical uses named | General purpose, moderate corrosion, cryogenic temperatures | Dairy, food, restaurant equipment, chemical tanks, protective overlay | Food and chemical work on both |
Lengths and diameters below come from the featured listings only. A rod length that suits a bench job can feel short on a long seam, and a diameter that suits thin work can feel slow on heavier sections, so match length and diameter to the joint in front of you, not to the listing headline.
Where 308L fits
- Corrosion matters. General-purpose stainless work where corrosion is moderate, including food, dairy, and restaurant equipment and chemical tanks.
- Stabilized grades. Welding 321 and 347, where the listings state the low carbon cap preserves corrosion resistance in the weld deposit and weld zone.
- Cryogenic work. The TIG listings name applications at cryogenic temperatures for this grade.
- X-ray quality claims. Both SÜA listings state the carbon cap yields x-ray quality welds, with the stick listing adding easy strike and restriking, smooth arc action, low spatter, and a self-peeling slag.
The gear section: four 308L products, ranked
The four featured products rank as follows. First, the SÜA ER308L TIG rod, 36 inches by 0.035 inch in a 2 Lb package, lists the widest diameter range in the group, from 0.030 inch through 3/16 inch, with packages of 1 Lb, 2 Lb, 5 Lb, and 10 Lb, plus DCEN settings and tungsten guidance covering thoriated, ceriated, lanthanated, and rare earth types. Second, the WeldingCity ER308L TIG rod, featured here in its 5-Lb pack of 1/16 inch by 36 inch rods, lists specification AWS A5.9 and ASME SFA A5.9, a full deposited composition, diameters of 0.045 inch, 1/16 inch, 3/32 inch, and 1/8 inch, and further package options of 1-Lb and 10-Lb. Third, the YESWELDER ER308L TIG rod, 1/16 inch by 16 inches in a 5LB package, lists 100 percent argon or argon and helium shielding, but its rods are shorter than the 36 inch rods above, and its title states 5LB while its spec table lists 5.15 pounds. Fourth, the SÜA E308L-16 stick electrode, 12 inches by 3/32 inch in a 2 LB package, covers all-position welding with a self-peeling slag and a finely rippled bead, but its carbon cap of 0.04 percent maximum sits above the 0.03 percent cap on the TIG rods.
Shielding gas and settings
TIG rods in this group need gas. WeldingCity, YESWELDER, and the SÜA TIG listing all state 100 percent argon, and YESWELDER and the SÜA TIG listing add argon and helium for greater penetration and higher speeds. The SÜA TIG listing recommends DCEN settings. The stick electrode needs no gas cylinder: the listing states easy strike and restriking, low spatter, and a self-peeling slag. For the process choice in full, see TIG vs stick for stainless steel and welding rods vs MIG wire. For keeping rods dry and sorted, see best welding rod storage.
FAQ for welders
What is the difference between 308 and 308L welding rod?
308L is the low-carbon grade. The TIG listings cap its carbon at 0.03 percent or less to reduce intergranular carbide precipitation and protect resistance to intergranular corrosion. The stick listing caps carbon at 0.04 percent maximum for the same stated purpose.
Which base metals do 308L rods weld?
The TIG listings name stainless steel 304, 304L, 308, 308L, 321, and 347. The stick listing names low carbon 19 percent chromium and 9 percent nickel austenitic stainless steels such as 304L, plus stabilized grades 321 and 347.
What shielding gas do 308L TIG rods need?
Shielding gas is required, usually 100 percent argon. YESWELDER and the SÜA TIG listing also name argon and helium for greater penetration and higher speeds. The stick electrode states a self-peeling slag instead and names no shielding gas.
Can 308L rods weld food and dairy equipment?
The listings name dairy, food, and restaurant equipment among the common applications, along with chemical tanks and general-purpose work where corrosion is moderate. The stick listing also names fabrication and repairs in dairy, food, and restaurant equipment.
What diameters and lengths are available?
Across the TIG listings, diameters run from 0.030 inch through 3/16 inch, with rod lengths of 36 inches and 16 inches. The stick electrode comes in 3/32 inch at 12 inches long and 1/8 inch at 14 inches long. See 1/16 vs 3/32 welding rod for the two most common small diameters.
Related: TIG vs stick for stainless steel, welding rods vs MIG wire, best welding rod storage, and best brazing rod for stainless.




