Best Welding Rod Storage (2026): 5 Tubes and Cans
Five welding rod storage tubes and cans for stick and TIG electrodes, compared on length, capacity, seal and what each listing states.

On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallBlue Demon RST-149.6/10View on Amazon - 2
Belt Carry PickHobart 770073 Can9.6/10View on Amazon - 3
Four-Tube SetZonon 4-Pack Tubes9.5/10View on Amazon - 4
TIG LengthBlue Demon RST-369.5/10View on Amazon
A stick electrode left on the bench overnight picks up moisture, and a damp rod welds like a sparkler. Keeping rods dry is the whole job, and that is what best welding rod storage is for. This guide compares five storage tubes and cans on what each listing states: length, capacity, seal, and what is in the box.
WeldGearLab gets a commission on purchases made through links on this page, and your price stays the same. Read our affiliate disclosure.
Quick picks
- Best Overall Blue Demon RST-14: Holds 10 lbs of stick electrodes in high impact polyethylene with a neoprene seal, air and water tight, with a key tag. Check price on Amazon
- Belt Carry Pick Hobart 770073 Can: Airtight can with a belt clip and 4-compartment divider, 14.8 x 3.2 x 1.5 inches. Check price on Amazon
- Four-Tube Set Zonon 4-Pack Tubes: 4 tubes in 4 colors holding rods to 350 mm, sealed and waterproof, 3.55 pounds. Check price on Amazon
- TIG Length Blue Demon RST-36: 36 inch tube for TIG filler rods, waterproof and airtight, though the listing contradicts its own weight. Check price on Amazon
The machines

Blue Demon Stick Welding Electrode Storage Tube
A 14 inch stick electrode storage tube holding 10 lbs of electrodes, in high impact polyethylene with a neoprene seal, air and water tight, with a key tag.
Pros
- Stated 10 lb electrode capacity
- Neoprene seal, air and water tight
- 1/8 inch nominal wall in high impact polyethylene
- Key tag included for labeling
Cons
- No additional warranty is stated
- Single tube only
- 14 inch length suits stick, not long TIG filler

Hobart Welding Electrode Storage Can with Belt
An airtight plastic electrode storage can with a belt clip and 4-compartment divider, at 14.8 x 3.2 x 1.5 inches and 13.1 ounces.
Pros
- Belt clip for carrying rods to the work
- 4-compartment divider stated
- Airtight seal stated
- 13.1 oz, light on the belt
Cons
- Warranty reads manufacturer warranty with no term
- No stated electrode capacity
- Plastic, not high impact polyethylene
- One can only, no multi-pack

Zonon 4 Pcs Welding Rod Storage Tube 14 Inch Tig
Four 14 inch PP rod storage tubes in 4 colors, holding rods to 350 mm, sealed and waterproof, at 3.55 pounds.
Pros
- 4 tubes in 4 colors for sorting rod types
- Holds rods to 350 mm (about 13.7 inches)
- Sealed and waterproof stated
- PP construction stated
Cons
- No warranty term is stated
- No stated electrode capacity in pounds
- 3.55 lb for the set
- No key tags stated

Zonon 2 Pcs Welding Rod Storage Tube 14''
Two 14 inch PP rod storage tubes in red and blue with 3 inch inner diameter, holding rods to 350 mm, sealed and waterproof, at 1.8 pounds.
Pros
- 2 tubes in red and blue for sorting
- 3 inch inner diameter stated
- Holds rods to 350 mm (about 13.7 inches)
- Sealed and waterproof stated
Cons
- No warranty term is stated
- No stated electrode capacity in pounds
- No key tags stated
- 14 inch length suits stick, not long TIG filler

Blue Demon TIG Welding Rod Storage Tube, 36"
A 36 inch TIG rod storage tube in green, waterproof and airtight, with conflicting weight figures in the listing.
Pros
- 36 inch length for TIG filler rods
- Waterproof and airtight stated
- High impact polyethylene
- Green, distinct from the blue stick tube
Cons
- No additional warranty is stated
- No stated electrode capacity
- 36 inch tube needs long storage space
Other welders and gear to compare
Welding Electrode Storage Tube 2 PackCheck price on Amazon
Blue Demon TIG Welding Rod Storage TubeCheck price on Amazon
Blue Demon Stick Welding Electrode Storage TubeCheck price on Amazon
Blue Demon Rod Storage TubeCheck price on Amazon
Spec sheet comparison
| Model | Gear Score | Tube length | Capacity | Seal | Weight | Warranty |
|---|---|---|---|---|---|---|
| Blue Demon RST-14 | 9.6/10 | 14 in | 10 lbs electrodes | Neoprene, air/water tight | 0.01 oz stated | Not stated |
| Hobart 770073 Can | 9.6/10 | 14.8 in | 4 compartments | Airtight | 13.1 oz | Not stated |
| Zonon 4-Pack Tubes | 9.5/10 | 14 in | Rods to 350 mm | Sealed, waterproof | 3.55 lb | Not stated |
| Zonon 2-Pack Tubes | 9.5/10 | 14 in | Rods to 350 mm | Sealed, waterproof | 1.8 lb | Not stated |
| Blue Demon RST-36 | 9.5/10 | 36 in | TIG filler rods | Waterproof, airtight | 1 lb / 2.0 lb | Not stated |
These numbers are the manufacturer’s ratings exactly as each listing gives them, recorded on 22 October 2026.
What the listings tell you
Two brands cover four of the five picks: Blue Demon with the RST-14 stick tube and the RST-36 TIG tube, and Zonon with 4-pack and 2-pack tube sets, plus the Hobart belt-clip can. Seals are stated on all five: neoprene on the Blue Demon stick tube, airtight on the Hobart, sealed and waterproof on the Zonons, and waterproof and airtight on the TIG tube. Warranties are thin across the board: the Blue Demons state no additional warranty, the Hobart states a manufacturer warranty with no term, and the Zonon listings state none.
Buying guide: best welding rod storage, what matters
Tube length
Stick electrodes fit the 14 inch tubes: the Blue Demon RST-14 and the Hobart can at 14.8 inches, plus both Zonon sets at 14 inches. TIG filler rods run long, which is why the 36 inch Blue Demon TIG tube is 36 inches. Match the tube to the rod; a 14 inch tube will not close on a 36 inch rod. The Blue Demon RST-14 lists an inside diameter of 3 by 3 inches and an outside of 4 by 4 by 16 inches. The Hobart can measures 14.8 x 3.2 x 1.5 inches. The Zonon 4-pack tubes are about 3 x 3 x 14 inches, and the 2-pack about 4 x 4 x 14 inches with a 3 inch inner diameter.
Seal
The Blue Demon RST-14 lists a neoprene seal where the tube screws together, stated air and water tight. The Zonon tubes claim sealed and waterproof storage, and the Hobart claims an airtight seal. The seal is the feature that keeps rods dry, so it outranks color and shape. The Blue Demon wall is a 1/8 inch nominal thickness of high impact polyethylene, and the tube screws together over the neoprene seal. The Zonon tubes are PP, and the Hobart can is plastic.
Capacity
Only the Blue Demon RST-14 states an electrode capacity: 10 lbs of stick electrodes. The Hobart divides its can into 4 compartments instead of quoting pounds. The Zonon tubes state rod length, to 350 mm (about 13.7 inches), not weight. Buy capacity in the unit the listing states. The Zonon 4-pack weighs 3.55 pounds for the set and the 2-pack 1.8 pounds, and the Hobart can weighs 13.1 ounces.
What to check in the listing
Two listings contradict themselves. The Blue Demon RST-14 spec table lists 0.01 ounces, which no tube weighs. The Blue Demon RST-36 spec table lists 37 x 2 x 2 inches and 1 pound against bullets of 3.0 x 3.0 x 37.0 inches and 2.0 lb. In both cases the title and bullets are the safer read. The Zonon listings state sealed and waterproof storage with no contradictions between their bullets and spec tables.
Before You Strike an Arc
- Match the tube to the rod: stick electrodes fit the 14 inch tubes, and TIG filler needs the 36 inch Blue Demon TIG tube.
- Check the seal: the Blue Demon lists a neoprene seal, the Zonons claim sealed and waterproof storage, and the Hobart claims an airtight seal.
- Label the tubes: the Blue Demons include a key tag, so rod types do not mix in one tube.
- Check the listing figures on arrival: the Blue Demon RST-14 lists 0.01 ounces and the RST-36 lists two different weights.
- Keep the tubes sealed: the listings pitch airtight and waterproof storage, which only works with the caps on.
FAQ for welders
Why do welding rods need airtight storage?
Moisture is the enemy: the Hobart listing pitches keeping electrodes fresh and dry, and damp flux causes porosity and rough arcs. An airtight tube with a real seal, like the neoprene seal on the Blue Demon, keeps humidity out between jobs. Store the tubes sealed, not open on the bench.
What length tube do I need for stick vs TIG rods?
Stick electrodes fit the 14 inch tubes here, including the Hobart can at 14.8 inches. TIG filler rods need the 36 inch Blue Demon TIG tube. A 14 inch tube will not close on a 36 inch rod, so buy the length the rod needs.
How many electrodes fit in a storage tube?
Only the Blue Demon RST-14 states it: 10 lbs of stick electrodes. The Hobart quotes 4 compartments instead of pounds, and the Zonon tubes quote rod length to 350 mm. Where the listing is silent, the tube’s own size is the only guide.
Can I carry rods on my belt?
The Hobart 770073 has a belt clip for exactly that, at 13.1 ounces for the can. The tubes have no belt clip stated; they ride in the truck or on the bench. Clip the can on for short carries between the truck and the work.
Are the Zonon tubes long enough for TIG filler rods?
The Zonon tubes state rods to 350 mm (about 13.7 inches), which covers shorter filler. Longer TIG filler needs the 36 inch Blue Demon TIG tube. Match the tube length to the rod length.
Do these tubes work for TIG filler rods?
The 36 inch Blue Demon RST-36 is made for them. The 14 inch tubes fit stick electrodes; the Zonon tubes state rods to 350 mm, which covers shorter filler. Match the tube length to the rod length.
Related: the welding consumables hub, the welding rods guide, the best all around stick welding rod and the rod oven vs rod storage tube comparison.
Scoring, line by line
Each container is scored out of 10 on performance, build, value, safety certification and warranty, with the weights published on the How We Pick page. No listing here states a safety certification or a warranty term, so the ranking comes from performance, build and value.
| Product | Gear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Blue Demon RST-14 | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Hobart 770073 Can | 9.6 | 28 | 20 | 20 | n/a | 0 |
| Zonon 4-Pack Tubes | 9.5 | 27 | 19 | 21 | n/a | 0 |
| Zonon 2-Pack Tubes | 9.5 | 26 | 19 | 20 | n/a | 0 |
| Blue Demon RST-36 | 9.5 | 26 | 19 | 19 | n/a | 0 |
Displayed scores fall between 9.2 and 9.8: the weighted point total is mapped onto that band in a straight line, so earning more points always lifts the score. Safety is only scored for powered machines or when a listing names safety features; otherwise it drops out and the score is worked from the other 90 points.





